Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
4-1/16" x 2-1/8" Rectangle. LED trailer light functions as a clearance or side marker light. Unique double bullseye design. Durable polycarbonate housing and lens. Surface mount - hardware not included. 2-Wire design. PC-rated.
Features:
Specs:
Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we are taking a look at the Optronics Double Bulls-eye LED trailer clearance or side marker light. This LED trailer light functions as both a clearance light and side marker light when properly mounted. It features a unique double bulls-eye design and it is an LED system. LED's make great replacements for incandescent lights. They last longer, they burn brighter, they're more efficient. With LED's you don't have to worry about replacing bulbs and you don't have to worry about brittle filaments.This unit contains a real nice durable polycarbonate snap on lens so it can be replaced if ever needed.
And it has a white housing. It is a surface mount installation. We have two mount holes right here. You gain access to those by removing the lens. You can simply take flat head screwdriver and just pop that lens directly off the housing.
Mounting hardware not included. It's a two wire design. White wire for ground, black wire for power. It's PC rated and SAE and Department of Transportation compliant.We're going to take a look at the measurements real quick and then we'll hook it up to power. Edge to edge going in this direction is about 4 and 1/16 inches.
Top to bottom is about 2 and 1/8 inches. And the overall depth is about 1 and 1/8 inches. The mount holes on the unit are separated on center by 3 inches.We're going to go and hook it up to power that we see it with power running to it and we will also turn off our overhead lights so you can see it in a low light setting. It sends out a really nice bright, consistent signal. Here you can really get a good look at the double bulls-eye design of the unit.
It contains a total of 10 LED's or 10 diodes so the multi-diode design really helps optimize the overall light output. The power draw at 12.8 volts is 0.087 amps and Optronics puts a lifetime warranty on the LED's.That going to do it for today's look at the Optronics Double Bulls-eye LED trailer clearance or side marker light.
Average Customer Rating: 4.8 out of 5 stars (252 Customer Reviews)
4-1/16" x 2-1/8" Rectangle. LED trailer light functions as a clearance or side marker light. Unique double bullseye design. Durable polycarbonate housing and lens. Surface mount - hardware not included. 2-Wire design. PC-rated.
The only reason I gave 4 stars, some of the lights I received were LED and some incandescent by mistake. etrailer promptly sent out the correct marker lights. I finished wiring the trailer and they look great.
I hard wired the grounds on these lights (MCL46RB and MCL46AB) and the trailer owner has enjoyed very good results. The trailer is used in the Lake Erie snow (salt) belt and with attention to detail in wiring, the lights are reliable, pretty rugged, and are very visible from a wide range.
This marker light was extremely hard to find locally. Each supplier only had it in the red color and I needed the whole unit not just a replacement cover. I finally found this online at etrailer.com and it was worth the slightly extra cost because I had already wasted three different trips to stores trying to track it down. This was convenient and it was exactly what I needed and it was installed right away by my husband. This company made it very easy!
After trying in vain to revive the old incandescent marker lights on our 1991 Prowler trailer, we are delighted with these new LED ones. The old ones were so corroded that even new bulbs didn't help. The new LED ones are so much brighter and well sealed from the weather. And at a great price too!!! Thanks.
Great product but even better customer service. etrailer is now my go to spot for all my trailer needs.
Good, bright LED light at a reasonable cost, best for a somewhat protected location.
Fast shipping, product is great. Had a cracked lense on one of the lights and they sent one out as soon as I emailed them about it.
Thanks. Will buy again from etrailer.com
Awesome. Service is great. etrailer really knows what it takes to get and keep customers for life. I will only buy from them from now on for all my truck and trailer needs!!
Quality item, not the cheap china junk. Circuit board is epoxied, room in rear for wires if mounting flush on solid surface.
The lightning i purchased looks great , dependable & bright!
Good quality, fast shipping, great pricing. etrailer is great to work with.
Easy to install look good and bright, just installed so no idea of their longevity
Shawn
8/4/2016
Still work great
I am pleased with my purchase and the service provided by etrailer.
I enjoy shopping at etrailer great prices and awesome service.
Exactly perfect replacement.
Package was received on time. Notification done along the way.
These have 5 LEDs on the top and 5 on the bottom -- or 5 on the right and 5 on the left, depending upon their orientation ;-) So a total of 10 LEDs.
Bright and visible from the sides, too. Easy, two-wire hook-up. Works great!
Great purchase, excellent quality. You always out perform.
Still working great one year later.
Great lights Have worked flawless
Product as described. Exceptional ordering and shipping
good lights on trailorat a good price.
Fast shipping,great prices and excellent customer service.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jim
5/2/2017
Really like these light very much. Very reliable and a great improvement from the incandescent lights they replaced. I would recommend using a wired ground vs. ring terminals to frame for a lifetime of trouble free operation.