Optronics Mini LED Clearance or Side Marker LIght - Submersible - 3 Diodes - Rectangle - Amber Lens
(9 reviews)
Price: $11.87
In Stock
Optronics Mini LED Clearance or Side Marker LIght - Submersible - 3 Diodes - Rectangle - Amber Lens
Item # MCL14AGB
Our Price: $11.87
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (9)
- Q & A (0)
- Videos (1)
- Photos
Optronics Trailer Lights - MCL14AGB
- Clearance Lights
- Rectangle
- LED Light
- Amber
- 2-1/2L x 1-1/8W Inch
- Surface Mount
- Rear Clearance
- Side Marker
- Optronics
2-1/2" x 1-1/8". Waterproof, LED trailer light serves as either a side marker light or a clearance light. Durable polycarbonate lens and housing. Horizontal or vertical surface mount - hardware not included. Single Wire. PC rated.
Features:
- Rectangular LED trailer light serves as either a side marker light or a clearance light
- Sonically sealed, waterproof housing and lens unit is submersible
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate lens and housing
- Amber lens over white LED
- Surface mount - hardware not included
- Can be mounted in either vertical or horizontal orientation
- Single wire design grounds through mounting hardware
- PC rated
Specs:
- Light dimensions: 2-1/2" long x 1-1/8" tall x 5/8" thick
- Distance between mounting holes (center on center): 1-3/4"
- Diodes: 3
- Power draw at 12.8 volts: 0.06 amps
- Lifetime warranty on LEDs
Sonically Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the internal components.
Surface-Mount Light
Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
PC-Rated Lights
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
MCL14AGB Optronics Mini Sealed LED Horizontal-Vertical Marker/Clearance Light - Amber
California residents: click here
Video of Optronics Mini LED Clearance or Side Marker LIght - Submersible - 3 Diodes - Rectangle - Amber Lens
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Optronics Trailer Lights - Clearance Lights - MCL14AGB Review
Speaker 1: Today we're taking a look at the Optronics Mini Sealed LED Marker Clearance Light. This sonically sealed waterproof light functions as a side marker, or clearance light for your trailer. It is a surface mount installation. You can mount it horizontally, or vertically, whatever works best for your application. Mounting hardware is not included. This is a LED system.
LEDs make great replacements for incandescent lights. They last longer, burn brighter and they're more efficient. With LEDs, you don't have to worry about changing bulbs or worry about brittle filaments. This is an amber light, so it has a nice, durable amber polycarbonate lens. It's a single wire design for power.
And in the unit grounds through the mounting hardware. Again, mounting hardware not included.It is a PC and P2 rated light. It's SAE and Department of Transportation compliant. Taking a look at the overall measurements real quick, and then we'll hook it up to power so you can see what it looks like with power running to it. Edge to edge going this direction measures about two and a half inches.
Top to bottom is about one and one sixteenth, and the overall thickness of the unit gives a measurement of about, I'm going to say nine sixteenths, to five inches. Or excuse me, nine sixteenths to five eighths of an inch thick.The mount holes are separated on center by one an three quarter inches. We're going to go ahead and hook it up to power. That way you can see what it looks like with power running to it. And then we'll also be able to turn off overhead light so you can see it in a low light setting.
So you can see here that it sends out a nice, bright, consistent signal. Again, it is an LED light. But when it comes to the power draw at 12.8 volts we're looking at 0.06 amps and Optronics puts a lifetime warranty on the LEDs.And that's going to do it for today's look at the Mini Sealed LED Marker Clearance Light.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Product did not meet expectations
Customer Reviews
Optronics Mini LED Clearance or Side Marker LIght - Submersible - 3 Diodes - Rectangle - Amber Lens - MCL14AGB
Average Customer Rating: 4.9 out of 5 stars (9 Customer Reviews)
2-1/2" x 1-1/8". Waterproof, LED trailer light serves as either a side marker light or a clearance light. Durable polycarbonate lens and housing. Horizontal or vertical surface mount - hardware not included. Single Wire. PC rated.by: Susan04/08/2024
Unfortunately, my old age led me to believe that another part, similar to the one I ordered arrived. Sadly, it was the wrong part. I called e-Trailer to complain that the part they sent was wrong; however, it was s part from a competitor. They agreed to send another. When I discovered the error I had made, I called to ca
Novel.. they were gracious.
by: Beverly 02/10/2024
Arrived on time perfect
by: Jarrod 04/15/2023
Exactly what I ordered and shipping was fast. Trouble free transaction all around
by: Jose 02/13/2023
by: Shawn 01/08/2021
Great little lights
by: Jack 02/08/2024
by: Lavonne07/02/2023
by: Vickie 09/02/2022
by: Chris03/24/2022
9
9
See what our Experts say about this Optronics Trailer Lights
- Do Optronics MCL14 and MCL13 Trailer Lights Use the Same Brackets/TrimYes, I checked with Optronics and the Mini Sealed LED Horizontal-Vertical Marker/Clearance Light # MCL14AGB that you referenced uses the same trim pieces or mounting brackets as the # MCL13A2B that you referenced. For a black snap on ring the part # A13B2B would fit.
view full answer...
Info for this part was:
Expert Research:
Jameson C
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Brian T
Edited by:
Daron K
Written by:
Anna W
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jose
2/14/2024
Excellent product trailer has been submerged and no issues at all very bright and visible