Mini Clearance/Side Marker Light w/ Grommet - Submersible - Amber LED - Amber Lens - 9" Pigtail

Video Transcript for Review of TecNiq Trailer Lights - Clearance Lights - TN72RR

Hello everybody, this is Jeff at etrailer.com, today we're gonna take a look at this TecNiq Recess Mount Mini Amber LED Clearance, or Side Marker Trailer Light, with the rubber grommet. Now this is a nice small one inch diamond around LED light that'll serve as a front side marker and a clearance light for your trailer. It is a sealed waterproof unit, includes a durable polycarbonate housing and a UV resistant lens. And they do use the military grade construction of the circuit board. Offers urethane potting off, gives you better protection in the common epoxy potting and the LED they use on this is a premium LED. It is energy efficient, long lasting, and vibration resistant.

It is rated for up to about a hundred thousand hours of operation. Now you can see it as a two wire, power and a ground, so what I'm gonna do is go ahead and hook this up to some 12 volt power just so we can see what the light looks like when it's turned on, get it all hooked up. And turn on our 12 volt. And there you can see the amber LED, I'll go ahead and turn off the overhead light and you can see how gives off a nice bright amber LED. Go ahead and zoom out just to show you from a distance, what it would look like as a clearance or side marker light.

I'll go ahead and turn off our, or turn back on our overhead lights, we'll go ahead and turn off our power. As I mentioned, it is an amber lens over one amber LED. It is compatible with 12 volt DC system. Now to install this, it is a recess mount installation. So we mentioned it comes with this included grommet.

So basically you can see if I pull this grommet down and we drill your hole it requires a three quarter inch diameter cutout. You'll push this grommet into that cutout, and then just pop your light right into the grommet, and it would hold it in place. It is a two wire harness, it'll hard wire to your trailer, power and a ground, and the wire length is about nine inches. This is a PC rated light, produces 180 degree beam when it's properly installed, and it'll meet or exceed your federal motor vehicle safety standard, 108 standards. Dimension again, is one inch, depth of it is seven-eighths of an inch, input voltage, 9 volts to 14 volts, and the power draw on this is 0.03 to 0.06 amps.

But that should do it for the review on this TecNiq Recess Mount Mini Amber LED Clearance, or Side Marker Trailer Light, with the rubber grommet..