Does etrailer Hitch e98905 Fit 2018 Toyota Tacoma 4 Cylinder

Question

Question:

Will this hitch fit on a 2018 Tacoma 4 cylinder? I didn’t notice any specs for a 4 cylinder and thought that I should ask before ordering. Thanks in advance

asked by: Sam

0

Expert Reply:

The etrailer hitch part # e98905 that you referenced fits all models of the 2018 Toyota Tacoma including the 4 cylinder models so it would work great for you.

expert reply by: Jameson C

0

Answer 1

The only difference between the Curt Trailer Hitch Receiver #C13264 and etrailer Trailer Hitch Receiver #e98905 for your 2022 Toyota Tacoma is the finish; apart from that, the two hitches have the same installation, capacities, and look. The best…

view full answer...

Answer 2

The best front mount hitch available for your 2019 Toyota Tacoma TRD is the Curt #C31075. This particular hitch will still require you to trim the skid shield to allow for the needed clearance but unlike the Draw-Tite alternative it will allow you to…

view full answer...

Answer 3

You actually will not loose any ground clearance with Curt front mount receiver #C31075 installed on your 2017 Toyota Tacoma. The receiver will not be lower than the lowest part of the front fascia on the truck. I have included a picture showing the…

view full answer...

Answer 4

According to the installation instructions for the Draw-Tite Trailer Hitch, #24872, you should use a file to enlarge the frame access hole on your 2014 Ford Focus. You will want to enlarge the hole just enough to get the hardware through. I have…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Does etrailer Hitch e98905 Fit 2018 Toyota Tacoma 4 Cylinder

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching