etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
Item # e98853
Retail:$254.41
Our Price: $189.92
You Save: $64.49
Confirmed to Fit
2012 Toyota Sienna
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (539)
- Q & A (0)
- Photos
2012 Toyota Sienna - etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Class III
- 2 Inch Hitch
- 3500
- Concealed Cross Tube
- etrailer
- 525
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Toyota Sienna's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer
- Matte black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Made in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 525 lbs
- Not rated for use with weight distribution systems
- Limited lifetime warranty
Rugged, Matte Black Finish
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
etrailer Technical Support
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
e98853 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
3,500 lbs.
Tongue Weight (TW):
525 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Gross Towing Weight (GTW):
3,500 lbs.
Tongue Weight (TW):
525 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Tech Tip
No drilling required for installation , Underbody panel(s) and/or fascia must be temporarily loosened or removed. Trimming may be needed to reattach panel or fascia. , Exhaust must be temporarily lowered for installation , Underbody trimming required (not fascia)
Complete Towing Package for 2012 Toyota Sienna
Retail:$430.17
Package Price:$319.24
2012 Toyota Sienna Owners Who Purchased This Trailer Hitch Also Bought...
Replacement Parts Available For This Product
Popular Sienna Trailer Hitch Accessories
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e98853
Average Customer Rating: 4.8 out of 5 stars (539 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.by: Jed04/23/2023
2019 Toyota Sienna
I’d give it 5 stars, but one of the bolts that came in the package wouldn’t thread into the frame. I tried all 6 spots and it was definitely the bolt. All the other bolts worked in each spot. I had to run to the hardware store to buy a new bolt. Thankfully they had the specs listed in the directions. Everything else was great, just bummed about the one messed up bolt. The bolt from the hardware store went in just fine, it was 5mm longer but that didn’t appear to matter.
There is a picture of the bolt, it looks fine but it simply wouldn’t thread. It wouldn’t thread into the little thing at the hardware store either they have next to the bolts to make sure you have the correct size.
by: Matt R.12/27/2023
Unfortunately, life got busy after ordering this receiver. It looked well designed, but once I installed it 18 months later, it didn't fit very well. Because we don't plan to use the full class III capacity, the 4 bolts that lined up should work.
Katrina D.
12/28/2023
It looks to me like this hitch was slightly flexed when you received it. This is pretty easily fixable. You can use a two by four and or a vise to bend it slightly back into position. I have a link below with more detailed instructions on how to correct this. Please let me know if this helps.
Helpful Links
by: Logan07/26/2023
I love this hitch. It installed super easy using the video provided by etrailer. Bent the tabs as they recommend and didn’t need to remove the bumper. For the past year I’ve been hauling around bikes on my tow hitch bike rack and gear in my tow hitch mounted cargo box on the back of my sienna. I can carry so much stuff. I just returned from a month long trip to Maine with my cargo box and it was amazing, I was able to bring everything I needed. I love the way the hitch looks I and love how versatile it makes my sienna.
by: Dan 04/21/2023
PITA to install for one bolt but trailer hitch seems well made and solid.
Dan
4/22/2024
It has worked out well for me. I don’t use it a lot but when I need to it is there.
by: Bill01/07/2024
2012 Toyota Sienna
Great fit! Easy peasy installation! We installed it on a 2012 Toyota Sienna. My sons and I worked on it together and had it on in less than 30 minutes. We pulled the exhaust to the side instead of removing the exhaust hanger. We bent the tabs instead of removing the bumper cover. Installation video was super helpful.
by: Mike 04/29/2024
Clear instructions, easy installation. Clean install design with everything hidden behind the bumper fascia except for the receptacle itself. I briefly considered the higher capacity options, but their capacity exceeded the capacity of the van, plus nothing was hidden. Really happy with my purchase, and etrailer shipped it out with a quickness.
by: Leo K.11/08/2023
Parts came on time. Watched some YouTube videos before installation. Used car ramps made me easy to access. Figured out less work: Opened cover half way and no removal the muffler holder. Things fit as they should be. And ready to pull. Happy with the quality.
by: Mike02/14/2024
2017 Toyota Sienna
3rd Hitch from etrailer. This one went on our ‘17 Sienna. Super easy install, fit was perfect. If you’re thinking of ordering from etrailer, you should, and you can install yourself. I’d suggest double checking bolt holes in frame before removing plugs per instructions, you don’t need the middle IIRC, so I ended up removing vapor tape seal but didn’t need to.
by: Moe 12/25/2022
We love the receiver hitch! Etrailer made it easy to purchase - picking the right receiver for me and delivery was reasonable, as predicted. It is well made including paint and easy to install.
Moe
12/31/2023
I havent had to pull anything this past year but I like having the option. I live in Michigan and the hitch still looks new. I would buy another hitch from etrailer for future vehicles for sure.
by: Gorak Shep02/12/2024
This hitch receiver has worked well for the year I've had it. What was great was that etrailer had it and several other options for my 2015 Toyota Sienna. The Youtube instructional video was spot on and made the installation straight forward. Note that you should bring a friend to help lift the unit in place. It's heavy and awkward. Otherwise it's a great product.
by: Tim 05/06/2024
2013 Toyota Sienna
Excellent fit with detailed instructions. Looks great with only the receiver showing. 100% satisfied.
by: Justin 02/20/2023
2017 Toyota Sienna
Worked perfect. I did not have to remove the bumper trim like it asked. Just the shield and the exhaust mount. Was done is 20 mins.
Justin
2/21/2024
It’s worked out great! It’s nice to be able to use the mini van for the smaller trailers. Easy install.
by: Jason03/04/2024
2014 Toyota Sienna
Looks like it is made by Curt for etrailer. The Curt brand hitch was more expensive so opting for the etrailer one saved me about $40.00.
Install was a little difficult by myself but everything worked out. The hitch was a perfect fit on my 2014 Sienna. Some reviews on the other products offered at etrailer said the holes didn't line up properly, but that was not the case with this hitch, the holes were perfect. Install video was very helpful.
by: Jim 03/30/2024
2013 Toyota Sienna
The shipping was fast and free. The hitch was easy to install and looks much better than standard hitches with the cross bar below the bumper.
by: Dad06/18/2023
Installed this hitch over the weekend, the hitch and hardware are top notch and the install was easy, looking forward to many years of service!
by: Scott 04/17/2024
2017 Toyota Sienna
Easy to install, absolutely no issues since installing. Would highly recommend. Etrailer has great employees who are always willing to answer questions.
by: Alex12/28/2023
Would have rated higher but hitch was not square when I received it either from manufacturing or shipping damage with no protective packaging. One side of the hitch was bent inward so it could not fit up into frame. Had to use a jack and wood blocking to bend hitch back to square before installing. In the pictures you can see the difference between sides compared to square.
by: Marc08/22/2021
This hitch was bought & installed on our 2020 Toyota sienna XLE AWD.
It was shipped and received at my house very fast, impressive. It came well packed with no damage.
My install was a little different than the paper instructions. My under body panel looks different than the instructions but I just held it up and cut out what needed to be removed & it looks great!
If you have one of these vans it’s well worth the money and time to install one, it sits 1 3/4” in from the bumper face. It’s very nice hitch!
Marc
8/23/2022
A year later and its great! Absolutely seamless, I forget it’s there. Walking past, getting groceries or the stroller, I don’t even think about it until I need to tow. I have zero regrets in buying it.
by: Matt 11/18/2023
Has been perfect. Towed cargo trailer across the northeast and cargo tray and quad bike rack from West coast. All with the Sienna! Install video was spot on. And took about half the expected install time. Cutting template was accurate and no issues. Very happy with the hitch. Added the E trailer airbags and Curt trailer light kit. Has been flawless set up.
by: Andy Cruz04/11/2024
very easy to install and well built holds my 300 lbs bike very good
by: Jared07/23/2021
2015 Toyota Sienna
Installed in a matter of a couple of hours by myself. I used a QuickJack to raise the car up. Otherwise, I would have had a time getting under there. Also used a floor jack with some 4x4s to raise the hitch in place, and then secured with a tie down before getting the 1st couple of bolts in. The image for the cutting of the undertray is not very accurat; you'll need to cut more than shown. Hauled my dirt bike with a HF carrier and had no issues. Definitely recommend this hitch and believe it was worth the extra work to install the hidden version.
Jared
7/26/2022
No complaints. Still glad I went with the hidden version, both for aesthetics and ground clearance issues. Will probably get another for one of my other vehicles at some point.
by: Todd 01/02/2024
2015 Toyota Sienna
I read several articles about installing a class three hitch on my daughter’s 2015 Toyota Sienna. I went with your hitch based on other reviews. Your hitch was everything that was promised. I completed my installation in under 90 minutes.
It fit perfectly. Thank you for a wonderful product at a reasonable price.
by: Wade 02/22/2024
Put this on with my father in law in about 40 mins. Watched the installation video prior and got after it.
by: Austin P03/20/2024
2012 Toyota Sienna
Great product. Very easy to install. Took me one hour to install it by myself.
by: Ethan 12/06/2023
2012 Toyota Sienna
Great product. Quality seems very solid and the hardware is great. The instructional video on their website is good. We installed it on our 2012 Toyota Sienna LE.
I highly recommend 2 ADULTS for this job, maybe even three at the end. You really need a couple of strong people to hold up the hitch while you put in the 1st couple of bolts. One problem that you come across is putting the exhaust pipe back on the rubber hanger. Good luck with that (haha). I couldn't get ours back on so I took it to our local mechanic and asked him to help. Thankfully he helped us slip it back on
25
539
Show More Reviews
See what our Experts say about this etrailer Trailer Hitch
- Trailer Hitch Recommendation for 2015 Toyota SiennaFor your 2015 Toyota Sienna the best trailer hitch option is the etrailer part # e98853 which has the best towing capacity and is mostly hidden which also allows it to have the best ground clearance. I attached an install video for this for you to check out as well. For trailer wiring you'd want the part # 118498 for if you have an SE model or the # 118648 for if you have a non-SE.
view full answer... - Mostly Hidden Hitch Option for 2012 Toyota SiennaFor Class II hitches for your 2012 Toyota Seinna we only have options that have the cross tube visible like the Curt # C12065. For a more hidden option you'd want the etrailer part # e98853 which is a Class III hitch that instead has a 2 inch hitch opening size. This does not require the bumper to come off for install either. It does require lower panel (not fascia) trimming and that the underbody panels to be temporarily removed.
view full answer... - Mostly Hidden Trailer Hitch for 2017 Toyota SiennaThe most hidden trailer hitch we offer for your 2017 Toyota Sienna SE is the etrailer part # e98853 which only has the hitch opening hanging below the rear bumper of the vehicle. Most other options have the crosstube that hangs below it as well.
view full answer...
- Trailer Hitch Recommendation for 2020 Toyota Sienna for Ground ClearanceTo avoid any issues with ground clearance with your 2020 Toyota Sienna, I strongly recommend a trailer hitch with a concealed crosstube because they will sit up higher and give you more ground clearance than a hitch with a visible crosstube. When we test fit the three trailer hitches that fit your 2020 Sienna that have a concealed crosstube - the etrailer.com Trailer Hitch Receiver # e98853, Curt Trailer Hitch Receiver # C13343, and Draw-Tite Trailer Hitch Receiver # 76112 - we found that...
view full answer...
- Complete List Of Parts Needed To Tow a Trailer With Brakes Using A 2014 Toyota SiennaThe trailer hitch I recommend for a 2014 Toyota Sienna is the etrailer Trailer Hitch Receiver part # e98853 which has a hidden cross tube but if you are looking to save money the etrailer Trailer Hitch Receiver part # e98837 is also good but does not have a hidden cross tube. The trailer wiring harness I recommend is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118498 which is plug and play. I much prefer the T-One because they typically last much longer...
view full answer... - Hitch and 5 Bike Rack Recommendation for 2015 Toyota SiennaFor a hitch for your 2015 Toyota Sienna I highly recommend the etrailer hitch part # e98853 which has a hidden crosstube that allows for a more concealed look and also helps with ground clearance. Then for a bike rack the Thule Apex XT part # TH9026XT that you referenced is a really great option for carrying 5 bikes. It is very easy to use, well, made and also very solid. I attached a review video for this rack on a similar Sienna for you to check out as well. If you plan on carrying...
view full answer... - Recommended Hitch w/ the Best Ground Clearance on a 2011 Toyota Sienna XLEThe Curt Trailer Hitch item # C12065 is going to give you better ground clearance than the Draw-Tite item # 36513 by 3/4". The Curt is 11-3/4" from the top of the receiver to the ground and the Draw-Tite is 11" from the top of the receiver to the ground. Neither one of these hitches do a good job of concealing the crossbar. If you are interested in a hitch that conceals the crossbar then I recommend going up to a 2" receiver and getting the etrailer Hitch item # e98853. This hitch is...
view full answer... - What Bike Rack do You Recommend for 2 Electric Bikes on a 2019 Toyota Sienna and 2017 GMC Acadia?The Inno Tire Hold 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Tilting # INH120 is a great choice for your 2019 Toyota Sienna and your 2017 GMC Acadia because it has a maximum weight capacity of 120 pounds, and it includes both a cable lock and a locking knob to deter theft of the bikes and the rack itself. Also, the Inno Tire Hold 2 will allow you to open the rear hatch of both of your vehicles as long as your electric bikes don't have unusually long handlebars. As far as a hitch recommendation...
view full answer... - Ball Mount Needed for etrailer e98853 Class III Hitch on 2011 Toyota SiennaWhen we installed the etrailer brand # e98853 Class III hitch on a 2011 Toyota Sienna, we found that the inside top edge of the receiver tube sat 12 inches above the ground. The rise/drop of the ball mount you need will depend on the coupler height of the trailer you're wanting to pull. With the trailer jack extended so that the trailer frame is level, measure the distance from the bottom edge of the coupler to the ground. I'll link you to a help article that fully explains how to take...
view full answer... - Which Hitch Should I Install On My 2017 Toyota SiennaWhen it comes to installing a trailer hitch on your 2017 Toyota Sienna both the Draw-Tite and Curt hitches are close in comparison, but I recommend The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch # C13343. The hitch is made in The USA. It has a gross towing weight up to 3,500 pounds and has tongue weight up to 525 pounds. Be sure to check your manual to see what the actual tow rating is for your vehicle. To grow your towing experience further I recommend The T-One Vehicle...
view full answer... - Difference Between Class III Trailer Hitches for 2020 Toyota SiennaSo there is one main difference between the Class III trailer hitches that fit your 2020 Toyota Sienna, and that's the visibility of the crosstube, with there being options for a concealed crosstube and a visible crosstube: Concealed Crosstube: - Draw-Tite Trailer Hitch Receiver # 76112 - Curt Trailer Hitch Receiver # C13343 - etrailer.com Trailer Hitch Receiver # e98853 Visible Crosstube: - Draw-Tite Trailer Hitch Receiver # 75237 - Curt Trailer Hitch Receiver # C13105 - etrailer.com...
view full answer...
- Replacement Hardware Kit for a etrailer Hitch on a 2013 Toyota Sienna Yes, we do offer replacement hardware for the etrailer Trailer Hitch Receiver item # e98853 you referenced. It is the Replacement Hardware Kit for Trailer Hitches item # RHK. You will just need to go to the product page and insert the hitch item number and manufacturer. This will get you the required hardware to install that etrailer hitch on a 2013 Toyota Sienna.
view full answer... - Best Hitch and Trailer Wiring for 2017 Toyota Sienna XLE AWDThe best hitch option is the etrailer # e98853 which has the most tongue weight capacity of the hitches that fit your 2017 Toyota Sienna and has the best ground clearance since it has a concealed crosstube. I attached a picture of this hitch installed as well as a link to an install video. For trailer wiring then the best option is the Tekonsha kit part # 118648 as it's very easy to install and also very reliable. Since you wanted to do some towing you might be interested in etrailer...
view full answer...
- Correct Trailer Hitch for 2020 Toyota Sienna Limited Premier with AWDThe etrailer Trailer Hitch Receiver part # e98853 is what I recommend for a 2020 Toyota Sienna (All Models). I checked with the manufacturer and verified that there will be no issues on a Limited Premier with AWD. The etrailer Trailer Hitch Receiver offers bolt-on installation and it has a hidden design for the best overall appearance.
view full answer... - Best Concealed Trailer Hitch Fit for 2020 Toyota SiennaThere are three trailer hitches with a concealed crosstube that fit your 2020 Toyota Sienna that have a concealed crosstube, the Draw-Tite Trailer Hitch Receiver # 76112, Curt Trailer Hitch Receiver # C13343 and etrailer.com Trailer Hitch Receiver # E98853. Of the three I highly recommend the Draw-Tite # 76112 because of the company's strong reputation for quality and because this is the only hitch of the three that can be used with a weight distribution system, which is important if you...
view full answer... - Best Trailer Hitch for Ground Clearance on 2019 Toyota SiennaThe hitch that's going to offer the best ground clearance for your 2020 Toyota Sienna is the etrailer Trailer Hitch Receiver # e98853. From the ground to the top inside of the receiver tube it measures just about 13 inches. The crosstube is hidden completely behind the bumper, so you're only going to be able to see the receiver tube protruding out the back. The Draw-Tite # 76112 comes in close at about 12-1/2 inches from the ground to the top of the two inch receiver opening.
view full answer...
- Comparison of Available Class III Hitches for 2020 Toyota SiennaThe main differentiation between the available Class III hitches is how they'll appear once installed. The etrailer brand # e98837 and the Draw-Tite # 75237 will have the entire hitch visible under the rear bumper. In contrast, the Draw-Tite # 76112 and the etrailer brand # e98853 will have the crossbar nicely tucked behind the rear bumper, with only the receiver opening and safety chain loops being visible. The concealed type hitch also allows about 2 more inches of ground clearance, which...
view full answer...
- Best Hitch for 4-Bike Rack for 2020 Toyota SiennaThe best hitch I can recommend for your 2020 Toyota Sienna to carry a 4 bike rack with is the etrailer.com hitch part # e98853 as it has plenty of capacity for a bike rack. It also has the best ground clearance due to it having only the hitch opening hanging below the rear bumper. Then for a bike rack the most popular 4 bike rack we have with other Sienna owners is the Thule Hitching Post # TH934XTR which widely considered to be the best rack you can get for the money.
view full answer... - Recommended Hitch for a 2017 Toyota SiennaTo add a hitch to your 2017 Toyota Sienna, I recommend the etrailer item # e98853. This hitch is custom fit and bolts to your van with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 525 lbs maximum tongue weight. I really like the etrailer Hitch item # e98853 because of how well it is concealed behind the rear bumper cover on the Sienna. This not only looks better then the Draw-Tite item # 75237 it always helps with ground clearance....
view full answer... - Best Trailer Hitch for a 2016 Toyota SiennaActually the Draw-Tite # 76112, Curt # C13343, etrailer # e98853, and EcoHitch # 306-X7255 all install so that only the receiver is showing. A lot of people like this look instead of having a thick piece of steel underneath their vehicle as well. You are correct in choosing a Class III trailer hitch with a 2" receiver over a Class II trailer hitch with a 1-1/4" receiver. The reason being that they are stronger and they are compatible with many more accessories. For your application I recommend...
view full answer... - Trailer Hitch for 2020 Toyota Sienna with Most Available Ground ClearanceOf all the hitches offered for your 2020 Toyota Sienna, the ones with the greatest amount of ground clearance (distance from the underside of the receiver tube to the ground) would be the Draw-Tite Class III, part # 76112 and the etrailer.com brand Class III hitch, part # e98853. Both hitches use a concealed cross tube, which tends to snug the entire hitch up closer to the underside of the bumper for greater ground clearance. The Curt # C12065 you'd looked at would hang down about 1 inch...
view full answer... - etrailer Trailer Hitch Receiver Compatibility On a 2019 Toyota Sienna All Wheel DriveYes, the etrailer Trailer Hitch Receiver # e98853 will fit your 2019 Toyota Sienna all wheel drive. I recommend installing a 4-way flat T-One connector when you install the receiver. We have the # 118498 that fits the SE trim and the # 118648 that fits all other trims. This will allow you to tow most small trailers and also use Auxiliary Lights # C53201 if your hitch mounted accessory impairs the view of your tail lights. The Mounting Bracket # C58001 will allow you to secure the 4-way...
view full answer... - Comparing etrailer, Curt and EcoHitch Hitch Receivers For Ground Clearance On a 2014 Toyota SiennaThe only difference in the etrailer Trailer Hitch Receiver # e98853 and Curt Trailer Hitch Receiver # C13343 is going to be the powder coat being matte black on the etrailer and gloss black on the Curt. As we have partnered with Curt to build our receivers in the matte black finish they are identical in dimensions. I do prefer the matte black powder coat on the etrailer receiver as it gives a more OEM appearance. As these both mount in the same position as the EcoHitch Hidden Trailer...
view full answer... - Fit of etrailer Brand e98853 Class III Trailer Hitch on 2017 Toyota Sienna SEThe etrailer brand Class III hitch you mention, part # e98853 is a confirmed fit for your 2017 Toyota Sienna. Installation will not require any trimming of the fascia, but the under-body panel shown in the instructions which I've linked will need to be trimmed or removed and permanently left off. If you elect to trim the panel, it won't be visible at from the rear of the vehicle. As you can see in the linked video, the hitch is a perfect fit. If you'll be towing with the hitch, you'll...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Edited by:
Lindsey S
Video by:
Joshua S
Video by:
Dustin K
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Chris R
Video Edited:
John S
Updated by:
Wilson B
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Ryan G
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jed
4/24/2024
A year out and working great. No problems at all.