Recommended Hitch w/ the Best Ground Clearance on a 2011 Toyota Sienna XLE
Question:
2011 Toyota Sienna XLE: It looks like you have 2 Class II hitches. Which one will have the most ground clearance? It looks like the Curt #C12065, but you are the experts. Also, I am assuming that with more ground clearance, the cross bar will be more hidden....correct?
asked by: Richard
Expert Reply:
The Curt Trailer Hitch item # C12065 is going to give you better ground clearance than the Draw-Tite item # 36513 by 3/4". The Curt is 11-3/4" from the top of the receiver to the ground and the Draw-Tite is 11" from the top of the receiver to the ground. Neither one of these hitches do a good job of concealing the crossbar.
If you are interested in a hitch that conceals the crossbar then I recommend going up to a 2" receiver and getting the etrailer Hitch item # e98853. This hitch is custom fit and bolts to your 2011 Sienna with included hardware. The top of this hitch sits 12-1/4" from the ground.
If you already have 1-1/4" accessories you can use the Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver item # HT02. This reducer will allow you to use bike racks and cargo carriers for 1-1/4" receivers in a 2" receiver without sacrificing any capacity.
Products Referenced in This Question
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- etrailer
more information >
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
- Hitch Adapters
- Hitch Reducer
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- No Extension
- Fits 2 Inch Hitch
- 2 Inch to 1-1/4 Inch
- Brophy
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Which Class III Trailer Hitch Receiver Provides Most Ground Clearance for 2007 Toyota Sienna LE
- Q&A: What Model Years of Toyota Sienna Does etrailer Trailer Hitch e98837 Fit
- Q&A: Difference between Tekonsha T-One and Curt T-Connector Wiring Harness for 2007 Toyota Sienna
- Q&A: Choosing Between Tekonsha or Curt Powered Taillight Converter/Wiring Harness for 2020 Honda Odyssey
- Q&A: Recommended Trailer Hitch for 2023 Hyundai Tucson - All Models
- Q&A: What Transmission Cooler do You Recommend for My 2017 Toyota Sienna?
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: Which Hitches are Made in the USA
- Article: Trailer Hitch Installation Tips
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: How to Measure for Trailer Hitch Drop
- Article: Best Bike Racks for Electric Bikes