Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Item # C11497
Retail:$367.95
Our Price: $213.44
You Save: $154.51
Confirmed to Fit
2007 Subaru Impreza
Sedan and 5-Door Wagon - excluding WRX
WRX - excluding STi
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (24)
- Q & A (0)
- Photos
2007 Subaru Impreza - Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- 1-1/4 Inch Hitch
- Class I
- 2000
- Concealed Cross Tube
- CURT
- 200
- Custom Fit Hitch
Perfect for light-duty towing, this custom, Subaru Impreza trailer hitch receiver features fully welded, gloss powder coated steel construction.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Drawbar, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
11497 Curt Class 1 Trailer Hitch Receiver
Replaces Curt C11318
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
2,000 lbs.
Tongue Weight (TW):
200 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Gross Towing Weight (GTW):
2,000 lbs.
Tongue Weight (TW):
200 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Tech Tip
Product intended for Second Generation models. No drilling required for installation , If present, the carbon canister must temporarily be lowered for hitch installation
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- Too difficult to install
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11497
Average Customer Rating: 4.3 out of 5 stars (24 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction.by: NegativeStars09/04/2023
Had the hitch installed with the only use for a bike rack. It was $185 for the installation. The mechanic said it was one of the tightest hitch installations he had done in 40 years being a mechanic.Second time using the bike rack it was off because one of the bolts broke. Single bike not even close to exceeding the weight limit. Need to schedule to have it removed. Would not recommend this product to anyone who has a 2006 Subaru Impreza.
by: Adam A09/21/2023
2000 SubaruImpreza
I had the same problem a lot of other reviews have complained about. The holes in the bracket were off by a full bolt diameter on one side. Fortunately I've alignment punches and I was able to bend the bracket into place. Unfortunately I don't have an M12x1.25 tap to clean up the threads I mauled. Also, I need to figure out how to rehang the muffler because neither of the hangers can be reused. 2000 Subaru Impreza.
by: Ben03/08/2023
2005 SubaruImpreza
Mounting holes on the hitch didn’t line up with the threaded inserts on the car frame rails. Exhaust hanger hole on the hitch was not located properly either.
Katrina B.
3/16/2023
Well that sounds like a flexed hitch problem to me. I have a link below that explains how to correct it for you.
Helpful Links
by: Bryan 03/15/2023
Had some shipping issues that were on UPS’ end. ETrailer (Samantha) made it right. This is the 3rd hitch I’ve purchased from them and I wouldn’t look anywhere else. Always an excellent experience.
by: JO12/29/2022
Solid hitch. Fitted to a 2003 WRX to mount a TireTail to bring a set of race tires to events. You can fit a 3in exhaust with this but I highly recommend extended hangers if you don't want to hear the occasional clank.
by: Tyler07/11/2021
Great buy and easy install on my 2005 WRX Wagon. Helps to have a second set of hands to help clear the exhaust/bumper and get things aligned.
I tow a kayak trailer around every weekend, and this hitch is perfect for the job.
by: Joseph09/09/2021
2005 SubaruImpreza
2005 Subaru WRX
I've installed hitches from trailers for customers multiple times, decided to give it a shot for myself. As expected, everything lines up perfectly. My hitch did not come with new bolts or a hitch pin, some do. Overall 5/5 for faster than expected delivery
by: Norman07/03/2019
2007SubaruImpreza
A very good product with clear instructions.
I would suggest watching the videos on the website a few times. They have been well done.
Also to use a lift or ramps so you can work underneath the vehicle.
There was a bit of fiddling to get the tow hitch to fit but nothing major. The whole job was done in an hour.
I would also suggest another pair of hands.
I will be recommending this company for my business - I sell trailers and customers can order their hitches from etrailer.
by: Austin04/12/2023
Came bent and won’t even fit my car.
Jenny N.
4/13/2023
Hey I am sorry that you have not been able to install the hitch. Was it the side bracket that was bent? Honestly sometimes the side brackets can become bent out of alignment while in shipping. If it is only off by a half of an inch, then it is possible to bend it back to install the hitch. I have an FAQ below that can help. Please contact us if you are not able to flex it back or install the hitch.
Helpful Links
by: Michael 07/25/2021
2006 SubaruImpreza
Ordered the drawtite brand first, then found out it wasn't going to be in stock for another month or two. Spoke with customer service and they changed my order to the Curt brand which arrived within a week of calling. Installed it the next day with no issues. Fitment was perfect and only took me about an hour to install. Product seems strong and built to last.
by: James10/09/2022
Quick delivery easy install, keep your driver side muffler hanger the hole in the hitch does.not line up well very happy
by: Alyssa05/25/2022
Subaru
Got the job done and done well! If I remember correctly (this was a year ago) there was one part during installation that wasn’t lined up right on my ‘03 Subaru WRX. But i was able to install and got where I needed to go so all was good
by: Vaser05/18/2020
I have not tested out the hitch but installation went ok. The only issue was the holes for the driver side did not line up. Must be a common issue because others [online] had the same issue. Not a big deal. Had to use a sledgehammer to get it straight. Took me quite a while to put on because I live in rust valley so bolts were a challenged to take out.
by: Experienced Gear purchaser08/03/2021
Excellent Purchase experience -beyond expectation. I was given reliable purchase advice, from knowledgeable staff -rare these days. Good prices on a hard to find item. Delivery arrived 3 days sooner than expected. Can't do better than that. (And I am a critical purchaser)
by: John 08/14/2022
Was not lined up on bolt holes, had to heat and bend to fit. Other than that it works well.
by: Alexander 07/01/2021
The install took minutes! Great fitment on my JDM wrx. It enabled me to tow my jet ski with no issues whatsoever. 10/10, would recommend
by: Brennan05/15/2020
Bolted right in only took 30 minutes to install. It is very strong and not too noticeable.
by: Kyle 05/25/2020
2007SubaruImpreza
What a pain to install. It’s nice to have a hitch on my car though
by: Richard 08/30/2022
2006 SubaruImpreza
by: Harry 09/08/2023
by: Michael01/13/2022
by: Crasanda01/13/2022
by: Moises 08/08/2021
by: Chad 04/10/2021
2002 SubaruImpreza
24
24
See what our Experts say about this CURT Trailer Hitch
- Trailer Hitch and Wiring for a 2002 Subaru Impreza WRXThe two hitches you had mentioned are basically identical, however both have also been discontinued by the manufacturer, so for you 2002 Subaru Impreza WRX you'll need to go with the Curt # C11497. To finish off your towing setup you'll also need the appropriate ball mount, # 3593. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring you can use # C59496 to add a 4-Way flat connector at the back of your 2002 Subaru Impreza. I have linked the written...
view full answer... - Recommended Trailer Hitch and Trailer Wiring Harness for 2004 Subaru Impreza WRXThe Curt # C11497 Class I hitch you looked at would be a great choice for your 2004 Impreza WRX. It has the same weight ratings as the Draw-Tite and Hidden Hitch and would install in the same manner. Don't let the reasonable price fool you, Curt makes a great product so you wouldn't sacrifice anything by going with the least expensive option. If you'll be towing with the hitch, you'll also need the following items: Trailer wiring harness, part # C59496 Ball mount, part # C45022 1-7/8...
view full answer... - Recommended Trailer Hitch for 2008 Subaru Forester I do have a great option for you, however the Curt Class I Trailer Hitch # C11497 that you referenced will not fit your 2008 Subaru Forester. This particular hitch is designed for certain model years of the Subaru Impreza and Outback Wagon and it will not line up correctly to the frame rails of your Forester. For your Forester I instead recommend the Curt Class II Receiver Hitch # C12038, which will match existing holes in the frame of the vehicle for a no-drill installation, features...
view full answer... - Recommended Hitch and Wiring Harness for 2000 Subaru Impreza SportYou're halfway there, because the Curt # C11497 you were looking at is a confirmed fit on your 2000 Subaru Impreza. This hitch has a 1-1/4" receiver and will install on your vehicle without any drilling required. For wiring, I recommend using the # C59496 since the converters are a bit more reliable compared to the other ones available. I also like that this kit comes with a circuit tester for added convenience since this harness does require hard wiring into your vehicle. If you also...
view full answer... - Hitch, Ball and Trailer Wiring Recommendation for a 2007 Subaru WRXYes, the Curt # C11497 that you referenced will fit your 2007 Subaru Impreza WRX. You will need ball mount # 3593 and for a 2-inch ball I would recommend you get the Hitch Ball # 19258. This should work well to tow your boat and trailer that weighs 1,500 lbs since this hitch has a 2,000 lb capacity. You will still want to check the owner's manual of your vehicle to determine what Subaru recommends for towing capacities and be sure not to exceed the lowest rated component as this will be...
view full answer... - Towing Capacity For 2007 Subaru Impreza WRXPer the instructions for the Curt Hitch, part # C11497, which is a Class l hitch, the tow hooks (referred to as tie-down brackets) are removed and are not reinstalled on your 2007 Subaru Impreza WRX. The hitch has a 2,000 lb towing weight capacity, but you would need to either check your owner's manual or with your dealership to see what the vehicle is rated for. You do not want to exceed the vehicle capacity for tongue weight or towing capacity. Typically, a Class l hitch is used for...
view full answer... - Parts Needed to Tow Camper Trailer with Brakes with 2007 Subaru Impreza STIEverything you mentioned is a fit for your 2007 Subaru Impreza and will give you a solid towing setup that includes ability to control a trailer's brakes. Here's a list of everything you mentioned plus links to them as well. Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4inch - # C11497 Curt Upgraded Circuit Protected Powered Tail Light Converter w Hardwire Kit and Tester - 4-Pole Flat # C59496 etrailer.com Rubber Hitch Cover for 1-1/4inch Trailer Hitches - Qty 1 # 22281 Master...
view full answer... - Recommended Hitch and E-Bike Bike Rack for a 2005 Subaru Impreza WagonI would be happy to help, and I have a great bike rack and hitch, for your 2005 Subaru Impreza Wagon. You are correct the only hitches available for your car have a 1-1/4" receiver. Additionally they are also class I hitches which will eliminate you being able to use the Hollywood Racks Sport Rider SE item # HLY74FR because it requires a class II or III hitch. For a hitch, I recommend the Curt Trailer Hitch item # C11497. This hitch is custom fit and bolts to your Subaru with included...
view full answer... - Is the Curt # C11497 Compatible with a 1997 Subaru Impreza Outback Sport AWDYes, this Curt Trailer Hitch Receiver # C11497 will work on your 1997 Outback Sport AWD as it will fit all model Subaru Imprezas from 1993-2007. I attached installation instructions for this product for you to check out also. This hitch does not come with a pin and clip, but to complete your towing setup you may be interested in purchasing the following products: Curt Hitch Pin and Clip # F-4 Wiring # C45521 Hitch Ball 1-7/8 in diameter # 19256 Hitch Ball 2 inch diameter # 19258
view full answer... - Trailer Hitch for 2005 Subaru Impreza WRX WagonThe Class I trailer hitch I suggest for your 2005 Subaru Impreza WRX Wagon that is NOT the STi version is Curt # C11497. Per Curt's warranty policy you need to use a support strap # 18050 for any non-trailer load, such as a Class I bike rack like the Curt # C18085. For a trailer wiring harness you can use kit # C59496 which is a hardwired type kit. This includes everything needed to install a 4-pole flat trailer plug on your Impreza. For a ball mount use part # C45022 and either 1-7/8-inch...
view full answer... - What Trailer Hitch Will Fit My 2005 Subaru ImprezaWhen it comes to installing a trailer hitch on your 2005 Subaru Impreza I recommend The Curt Trailer Hitch Receiver # C11497. This hitch will have a similar installation process as the 2007 Subaru Impreza. The hitch has a gross towing weight up to 2,000 pounds and has a gross tongue weight up to 200 pounds. The Curt hitch has a concealed cross tube and has a sleeker cleaner look then other hitches after installation. I would also recommend The 4-Pole Trailer Connector and Installation...
view full answer... - Which Cargo Carrier is Compatible with a Class I Hitch on a 2005 Subaru Impreza WRX WagonThe available trailer hitches for your 2005 Subaru Impreza are all Class I hitches, including the Curt # C11497. This is in reference to how much capacity they have. A Class I hitch will have a gross trailer weight capacity of 2,000 pounds and a tongue weight capacity of 200 pounds. They also have a 1-1/4 inch receiver opening. Class II devices, such as the cargo carrier you are looking at, will physically not fit in a Class I hitch. This is so you do not accidentally overload your hitch...
view full answer... - Recommended Trailer Hitch for 2004 Subaru Outback WagonThe only available trailer hitches for your 2004 Subaru Outback Wagon all have 1-1/4 inch receiver openings. This is simply because the vehicle's towing and tongue weight capacities are lower than what a higher class trailer hitch (and larger 2 inch receiver opening) will provide. Trailer hitch manufacturers do this to prevent vehicles with lower capacities from being overloaded with a higher rated hitch. If you do not have the Sport model, I recommend the Draw-Tite Class II Frame Receiver...
view full answer... - Is Ball Mount Included With Curt Hitch C11497 for a 2005 Subaru ImprezaThe Curt Trailer Hitch # C11497 does not come with a drawbar. It is designed for use with the ball mount # C45521.
view full answer... - Trailer Hitch Fits for a 2007 Subaru Impreza Wagon for Use with Hitch Bike RackFor your your 2007 Subaru Impreza Wagon, we have the Curt # C11497. This hitch is a light-duty 1-1/4-inch Class I hitch. It has a 200-lb tongue weight (TW) and gross trailer weight (GTW) rating of 2000-lbs respectively. A Class I hitch can carry 2 bikes maximum and the link provided will let you see the many options we offer in both hanging style and platform style racks. Our most popular platform carrier is the Swagman XTC-2 2-Bike Platform Rack # S64670. Videos for both racks are...
view full answer... - Will Curt Class I 1-1/4 Inch Hitch # C11497 Fit a 2007 Subaru WRX STI with an Aftermarket ExhaustThe trailer hitch manufacturers do not test fit any vehicles with aftermarket products installed. They will only recommend a fitment on a 2007 Subaru Impreza WRX STI that has a factory exhaust. The Curt Class I 1-1/4 Inch Hitch, part # C11497, will fit a 2007 Subaru Impreza WRX STI with the factory exhaust. The rubber isolator that holds the factory exhaust will actually be removed and bolted to the Curt hitch side plate. You will also need to trim the rear bumper fascia, approximately...
view full answer... - Is Trimming Required for Installation of the 2004 Subaru WRX STI Hitch # C11497You will need to trim the rear bumper fascia as needed to provide clearance for driver side mounting plate (approximately a 1/2 inch x 1/2 inch area). Other than that there are no other permanent modifications that need to be made to install this Custom Fit Class I Hitch, item # C11497, on your 2004 Subaru WRX STI.
view full answer... - Recommended Bike Racks for 2007 Subaru Impreza with Class I ReceiverDue to the relatively low tongue weight capacity of your Class I hitch, you will be limited to carrying two bikes on a carrier. We offer two types of racks, the hanging style like Thule Camber part # TH9058 or the platform style like the Swagman XTC-2, part # S64670. Both styles have their advantages and disadvantages. The platform style typically is easier to use, because the bikes do not have to be lifted as high to place on the rack. The ratcheting arms securely hold the bike, with...
view full answer... - Extra Exhaust Hangers when Installing Trailer Hitch on a 2007 Subaru Impreza WRXBased on the exhaust you have and the unknown compatibility with Curt hitch # C11497 on your 2007 Subaru Impreza, I recommend getting 3, if not a couple extra just in case because you never know what you might need. Its better to be prepared. You mentioned using the hitch with a bike rack. Since the hitch is a Class I, you will need a bike rack that is Class I compatible and you are limited to 2 bikes at most. Also, Curt requires the use of stabilization strap # 18050 when using the hitch...
view full answer... - Will Curt Trailer hitch, # 11318 Fit a 2003 Subaru Impreza TS WagonI spoke with my contact at Curt about trailer hitch # C11497. He stated that it will fit your 2003 Subaru Impreza TS Wagon. I have included a link to the installation details for this hitch for you to view. If you plan to do some towing, the hitch comes with the proper ball mount, pin and clip. For a ball you can use # 19256 (1-7/8 inch) or # 19258 (2 inch diameter). For trailer wiring, use 4 Pole Harness # C59496. I have included a link to the installation details for you to view.
view full answer... - Fit of Curt Class I Trailer Hitch # C11497 on 2005 Subaru Impreza rs wagonAccording to Curte , their # C11497 Class I hitch is indeed a fit for your 2005 Impreza RS Wagon. The hitch has a 2000 lb towing/200 lb tongue weight capacity. I've seen references online that say the Impreza has a 2000 lb capacity for automatic transmission equipped models and 1000 lbs for manual transmission models. I'd urge you to confirm that for yourself with your owner's manual or Subaru dealer. If you're planning on towing with the hitch, you'll need a few other items to complete...
view full answer... - Trailer Hitch and Wiring for a 2007 Subaru Impreza HatchbackThe trailer hitches that are available for your 2007 Subaru Impreza all top out at 200 pounds tongue weight so you would need a different way to carry the motorcycle. Basically, using the Impreza the motorcycle would have to be on a trailer. This is actually much safer and easier on the vehicle than a hitch mounted carrier. If your Impreza is a WRX but not an STi model then you can use Curt trailer hitch # C11497. The proper ball mount is # 3593. For a 1-7/8 inch ball use # 19256 and for...
view full answer... - Hitch Recommendation for a 2005 Subaru ImprezaYes, the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11497 that you referenced is confirmed to fit your 2005 Subaru Impreza and comes with installation instructions that include torque specs. A hitch accessory would be a bike rack or cargo carrier. Since you only plan on towing you don't need to worry about that. For wiring, you will need the Curt # C59496. For a ball mount you will want the part # 3593, 1-7/8 inch ball # 19256, 2 inch ball # 19258. You will want to...
view full answer... - Recommended Trailer Hitch for Towing Motorcycle Trailer With 1995 Subaru ImprezaFor you 1995 Subaru Impreza, I recommend the Curt # C11497. The Curt model features a fully welded, gloss powder coated steel construction and a concealed cross tube. You will need a ball mount. You'll also need a trailer wiring harness, part # C59236 is recommended. Finally, you'll need a trailer ball like # 19256. Although the hitch has a 2000 towing/200 lb tongue weight capacity, you might be limited by the towing capacity of the vehicle, if it is less. You'll need to abide by the...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Updated by:
Wilson B
Updated by:
Isabelle B
Updated by:
Noah M
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
9/8/2023
It is very unusual for this to happen with a hitch. Would you be able to send a picture of the location of the bolt? Have you reached out to the manufacturer?