Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV- 2"
Item # DT38MR
Retail:$307.00
Our Price: $190.91
You Save: $116.09
Confirmed to Fit
2014 Jeep Grand Cherokee
EcoDiesel
excluding SRT-8 and EcoDiesel
SRT-8
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (124)
- Q & A (0)
- Photos
2014 Jeep Grand Cherokee - Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV- 2"
- 2 Inch Hitch
- Class IV
- 7500
- Visible Cross Tube
- Draw-Tite
- 1125
- 7500 lbs WD GTW
- 1125 lbs WD TW
- Custom Fit Hitch
Fully welded Jeep Grand Cherokee trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class IV
- Maximum gross trailer weight: 7,500 lbs
- Maximum GTW when used with weight distribution: 7,500 lbs
- Maximum tongue weight: 900 lbs
- Maximum TW when used with weight distribution: 1,125 lbs
- Limited lifetime warranty
- Maximum gross trailer weight: 7,500 lbs
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
76432 Draw-Tite Class 4Trailer Hitch Receiver - Max-Frame
Replaces Draw-Tite 76196
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
7,500 lbs.
Tongue Weight (TW):
1,125 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
7,500 lbs.
Tongue Weight (TW):
900 lbs.
Gross Towing Weight (GTW):
7,500 lbs.
Tongue Weight (TW):
1,125 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
7,500 lbs.
Tongue Weight (TW):
900 lbs.
Tech Tip
This only fits models with removable OEM Fascia Panel. No drilling required for installation , Requires temporary removal of bumper/fascia during installation , Installation requires permanent removal of the impact structure; hitch replaces the impact structure for support and safety , Hitch will fit models with an 18" or smaller spare tire under vehicle; larger spare tires will not be able to be stored under the vehicle
Complete Towing Package for 2014 Jeep Grand Cherokee
Retail:$352.66
Package Price:$297.36
2014 Jeep Grand Cherokee Owners Who Purchased This Trailer Hitch Also Bought...
Replacement Parts Available For This Product
Popular Grand Cherokee Trailer Hitch Accessories
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV- 2" - DT38MR
Average Customer Rating: 4.8 out of 5 stars (124 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.by: Sean10/17/2022
Haven’t put it to the test yet with actual towing, but as far as install goes it was super easy. The videos provided by etrailer were thorough and easy to follow along with. The daunting task of pulling off the rear bumper on my new car was less scary after having seen it done. Looks great!
by: Brian06/07/2022
Great hitch receiver at a great price!!
Fast delivery
Installed by my regular mechanic in less than an hour
Video on etrailer website was very helpful
Brian
6/8/2023
A year later and hitch is still working great without any issues. Highly recommended!!
by: Timothy04/06/2024
2014 Dodge Durango
The installation videos on durango (mine 2014) were extremely helpful. Especially how to remove the bumper facia. I found it was unnecessary to drop the exhaust system. The fish wires to pull the carriage bolt and bar were very helpful. on the passenger side, i needed to have the bar and bolt go into the cavity one at a time and had to be careful how the bar landed to allow it to reassemble by pulling on the fish wire.
by: Greg08/04/2022
2018 Dodge Durango
I am a first time user of e-trailer. My experience was a good one. The parts that I had ordered arrived very quickly for not having to pay any shipping, good on you e-trailer. I had watched the video on installing my new draw tite receiver. It was a completely custom fit for my 2018 Durango. And the video was spot on. As I saw in other reviews most did not like that they use ty-wraps to hold the bottom part of the fascia, so I went a step farther and drilled and tapped two 1/4x20 holes in the bottom of the reciever and screwed it on to the bottom (see pics) worked great. The only problem I had was the collar on the reciever was not welded on in the right spot, just a bit off. That made it difficult to push a hitch ball in or in my case a bike rack(also purchased for e-trailer, but with a bit of filing all good. Thanks guys for getting everything here quickly.
Greg
8/14/2023
I have not used it a bunch yet, but when I first installed it we went on a trip to Michigan. It was about a 5-6 hour drive. I hauled 4 adult bicycles on the hitch and bike rack purchased from e-trailer. They made the trip flawlessly, both directions. I was and are very satisfied with e-trailer and the equipment purchased from them, would recommend them to anyone. Thanks guys!
by: Roberlan02/16/2024
2019 Dodge Durango
Great fitment. Awesome product easy ins tallation
by: Eric07/31/2022
2019 Dodge Durango
Directions are clear, but the online video is super helpful and clearer.
Eric
7/31/2023
I feel confident of the integrity of the hitch. No issues on my occasional use with my trailer 2-5k and hitch carrier. Id buy again when needed for another vehicle.
by: Yonaidy04/29/2024
2021 Dodge Durango
It fit perfectly thank you so much already hang my bike on it
by: MP01/09/2023
So happy I purchased this hitch from etrailer. The installation went perfectly.
They though of everything and I loved the fish cables the best.
Very fast shipping..great customer service.. very detailed videos for installs.
It’s not to often companies value good business anymore.
I will definitely buy from etrailer again.
Excellent service. They deserve more then 5 stars.
by: Zach08/29/2023
So this hitch is great! It is a decent amount of work to put in by your self so I suggest asking for help. Even with help, be ready to put some work in. In my opinion it is worth it because this recover hides in the bumper so you can put cover on to make your Durango look slick. Now the only reason why I give it 3 stars, is because it’s very difficult to get the chains to snap on to the loops. It’s very inconvenient but this problem could probably be fixed with adding in some quick link hooks. If it wasn’t for that, I’d give it 5 stars!
by: Michael05/31/2024
Package was delivered as notified. First impression was the package was damaged,from the inside out. Upon opening I found the contents to be poorly packed. I understand it's a heavy piece. But could have been a little more stuffing to help the contents from shifting inside the box. As for the product small amount of damage to the paint but not significant to the actual use of the product. Thank you for the prompt shipping.
by: Bob 07/28/2023
2017 Dodge Durango
We are using this hitch package on our 2017, Durango GT to tow a new (single) personal watercraft. Delivery communication was delivery only took a few days. We had it professionally installed with no issues. I love that the hitch receiver is mostly hidden within the bumper cover (when in use) and that the removable OEM hitch cover fits perfectly with no interference (when not in use), all while maintaining OEM ground clearance. Very slick and MUCH less $$ than the OEM.
by: Tim 02/21/2024
Easy and straight forward unnatural process. Works great no problems.
by: Mike11/05/2021
Product came in on time and as described! The associated videos showing install was extremely helpful and they made the install very easy! I had a few different tools so I did not have to drop the exhaust, but I appreciate that they showed how to do it for those that may have to. Results came out awesome and the hardware included the body pins which was helpful. The only thing I would ask for would be the clips for the lower facia to be reinstalled instead of using zip ties.
by: Shaun08/23/2022
Excellent product. Very thorough directions. It made installation very easy.
by: Dan 08/26/2023
2021 Dodge Durango
so easy to install, online video was spot on with the instructions right down to the socket sizes needed.
by: Hugo04/25/2022
Everything fits perfect the only problem is the Botoom part doesn't have the support for bumper where 2 bottom bolts goes.
by: Aaron 02/04/2023
Dodge Durango
I am very pleased how well it fit on my 2022 Dodge Durango SXT. It took my son and I just over an hour to complete installation. We watched the provided installation video and never had to look at the instructions. Side note, we didn’t remove the spare, lower the exhaust, or cut the plastic as shown in the video.
by: Sidney12/14/2021
Very happy with the product. Was able to install as shown in the video.
by: Herman04/10/2023
2013 Dodge Durango
Worked out perfect even though my bumper didn't have the cutout for a hitch I made one
by: Mike01/26/2023
Missing the wiring harness
Brooke M.
1/30/2023
Thank you for letting us know! We will get you that harness. I have already sent your information to our customer service team and they will be getting in touch.
by: Chris09/20/2022
Fast shipping. Awesome instructional videos. Was able to install my hitch with the bumper mod so it was hidden when not in use. definitely reccomend to anyone looking for trailer/cargo accessories. Next purchase, roof racks!
by: John 08/22/2023
Just got it. Looks good! Had to wait a little but no problem. We’ll get it installed this week. Thanks!
by: Jeff 08/24/2022
I much prefer this hitch rather than the low-mount hitches. Installation was definitely more involved than the non-hidden receivers. My biggest complaint with this receiver is the attachment points for the trailer safety chains. It's impossible to get the safety chain hooks onto the mount rings, which ultimately requires the use of either quick links, or another (adequately rated) attachment technique.
by: Brandon 01/04/2023
Has worked flawless, I really like the fact that it sits behind the flat factory cover and my spare tire was able to stay in place.
25
124
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Recommended Hidden Trailer Hitch and Vehicle Wiring Harness For 2021 Dodge DurangoAbsolutely! For your 2021 Dodge Durango we have the Draw-Tite Trailer Hitch # DT38MR which installs in a manner making it able to be completely invisible by reinstalling the small cover on the center of your bumper. This hitch has a massive 900lb tongue weight rating and 7500lb trailer weight rating making it perfect for towing a good size trailer, or for carrying a bike rack or cargo carrier if you need to in the future. You will still need to confirm the towing capacity of your vehicle...
view full answer...
- Best Trailer Hitch for a 2018 Jeep Grand CherokeeYes, we do have a hitch for your 2018 Jeep Grand Cherokee. It is the Draw-Tite Max-Frame Trailer Hitch Receiver item # DT38MR. This hitch is custom fit and bolts to your Cherokee with included hardware. If you need a wiring harness to control your trailer or accessories lighting functions you will want the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118727. To round out your towing setup I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534....
view full answer... - Does Hitch Need to be Replaced on 2015 Dodge Durango Involved in CollisionIf the OEM hitch on your 2015 Dodge Durango took the brunt of the damage to the point the safety chain loops were bent then that leads me to believe there could very well be other damage to the hitch and you'll want to look for places where the paint is chipping away or you see any stress fractures. It might be best to just swap out to an aftermarket trailer hitch like the Draw-Tite # DT38MR so you know the hitch integrity hasn't been compromised but you might wait to see what your shop...
view full answer... - Trailer Wiring Harness Instructions for 2018 Dodge DurangoBy wiring schematic I can only assume you were referencing the installation instructions of the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118617 that fits your 2018 Dodge Durango, and we definitely have that; I have linked those directions for you to check out. Even better than the written directions, which can occasionally be confusing, I also linked a video install of this harness on an '18 Durango which walks you through the process and which I recommend using...
view full answer... - 4-Way and 7-Way Bracket that Fits 2021 Jeep Grand CherokeeThis bracket fits a very specific type of 7 and 4-way so I'd have to see what your OEM plug looks like. Does it look like the picture I attached?
view full answer...
- Trailer Hitch Receiver, Wiring and Weight Distribution For Towing a Travel Trailer With 2021 DurangoFirst you will need a Draw-Tite Max-Frame Trailer Hitch Receiver # DT38MR. This is my favorite receiver for your 2021 Dodge Durango as it is the only one that will fit behind the removable factory bumper cover. The receiver is rated for a tongue weight up to 900lbs and trailer weight of 7,500lbs. If you are using a weight distribution hitch the tongue weight increases to 1,125lbs. Be sure to not exceed any towing capacities given by Dodge for your Durango. I highly recommend using a weight...
view full answer... - Trailer Hitch and Wiring Recommendation for 2020 Jeep Grand Cherokee Limited XFor your 2020 Jeep Grand Cherokee Limited X I would recommend the Draw Tite hitch part # DT38MR which fits behind the rear fascia panel when not in use so it's totally hidden, has plenty of capacity, and installs relatively easy. Then for trailer wiring the Curt part # C62VR is the kit to use as it also installs easily and is very reliable. Then for a ball mount solution the etrailer kit part # 989900 comes with two ball mounts and two ball with the sizes of 2 inch and 1-7/8 inch.
view full answer... - Recommended Trailer Hitch Receiver for Jeep Grand Cherokee AltitudeYou have a few really great options, the first is the Draw-Tite Max-Frame Trailer Hitch Receiver, # 75699. This is a custom fit, class III - 2" hitch with maximum gross trailer weight of 5,000 lbs. 7,500 lbs. when used with a weight distribution system, although always defer your vehicle specific owners manual for your vehicles max weight ratings and follow the lower of the two numbers. For bike racks and cargo carriers it has a tongue rating to 500 lbs. This is a very good hitch at a...
view full answer... - Hitch Mounting Bracket for 7-Way Wiring Harness on a 2015 Jeep Grand Cherokee LaredoThe Hopkins 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End item # HM40975 will fit your 2015 Jeep Grand Cherokee Laredo if you have the towing package. It will be easy to confirm if you do because there will be an OEM plug directly behind your rear bumper to plug into to. I have linked an installation video. Typically the Draw-Tite hitches like Item # DT38MR have the mounting plate installed to mount the wiring harnesses. There isn't a hitch available for...
view full answer... - What Trailer Hitch, 7-Way, and Brake Controller do You Recommend for My 2021 Dodge Durango? For a great hitch for your 2021 Dodge Durango, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13182. The Curt hitch comes with an easy installation process and only takes about 30 minutes to install. It is much easier than the difficult installation process of the Draw-Tite # DT38MR. Also, the gloss outer coat and powder base coat provides superior protection from rust and corrosion. For 7-way wiring, you need to have a 4-way harness already installed to your...
view full answer... - Does Draw-Tite Trailer Hitch Fit 2012 Dodge DurangoDefinitely a smart idea to check, and I can verify for you that yes, the Draw-Tite Max-Frame Trailer Hitch Receiver # DT38MR will 100 percent fit your 2012 Dodge Durango. So you're good to go with the hitch, and if you plan on doing some towing and need a 4-way wiring harness the correct fit for your '12 Durango is Wiring Harness # C56333.
view full answer... - Is the Measurement of a Hitch Receiver Size the Internal or External Dimension of the Tube? The size of the hitch (1-1/4", 2", 2-1/2", and 3") refers to the internal dimensions of the hitch receiver tube. Since Class III hitches are only on 2" receivers, the internal dimensions of your hitch measure 2" x 2". However, it is important to make sure that you do not exceed the weight capacity of the hitch or the weight capacity of your vehicle. I went ahead and attached a helpful help article that walks you through the measurements of each hitch we carry.
view full answer... - Can You Upgrade The Trailer Hitch If Your Vehicle's Towing Capacity Exceeds The Hitch Capacity If the capacity of your vehicle is higher than the hitch then you can definitely swap to a higher rated hitch to match the capacity of the vehicle. The Draw-Tite Max-Frame Trailer Hitch Receiver # DT38MR you were looking at would be the right fit for your Durango. It has a 7,500lb capacity but you'll still be limited to the 7,200lb capacity of the vehicle. This hitch will replace the impact structure at the rear of the vehicle and will require trimming of the fascia. it will also only allow...
view full answer... - Will Draw-Tite 76432 Hitch fit 2019 Jeep Grand Cherokee w/ Removeable Panel in Bumper FasciaAccording to Draw-Tite, their 76432 hitch which we sell as part # DT38MR is a fit for the 2011-2021 Jeep Grand Cherokee with the OEM fascia panel that's removeable. You can see how the hitch fits on the vehicle by clicking the provided link to a video showing the hitch being installed on a 2020 Grand Cherokee with the bumper fascia panel. If you'll be towing with the hitch, you'll also need a trailer wiring harness like # 118727, a ball mount like # D-4, Hitch Pin and Clip, # PC3, and...
view full answer... - Trailer Hitch Recommendation for 2010 Ford E-350 VanI'd recommend going with the Curt Class V hitch part # 14055 that fits your 2010 Ford E-350 as it has way more capacity than you'd ever need, is made in the USA, and installs easily.
view full answer... - Budget Friendly Flat Tow Setup and Trailer Hitch for 2014 Jeep Grand CherokeeFlat towing isn't cheap so I will do my best to give you good options that are also budget friendly for your 2014 Jeep Grand Cherokee. I'm assuming you want to apply the same idea to the trailer hitch. To flat tow your Jeep you will need a tow bar, base plate kit, safety cables, wiring, and a supplemental braking system. I recommend the following: -Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521440-5 -Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs # RM-520 -RoadMaster...
view full answer... - Recommended Receiver, Wiring, Brake Controller & Hitch For Towing a Travel Trailer With 2020 DurangoYes, the Draw-Tite Max-Frame Trailer Hitch Receiver # DT38MR will give you a receiver that mounts behind the removable tab on your bumper for your 2020 Dodge Durango. Do be sure to check your spare tire size as this receiver will only allow you to keep your spare tire underneath your Durango if it is on a 18" or smaller spare tire. For the wiring you will first need a T-One Vehicle Wiring Harness # 118617 for connecting to your tail lights. This will then connect to the Universal Installation...
view full answer... - Trailer Hitch Receiver For a 2019 Dodge Durango GT I recommend installing the Draw-Tite Max-Frame Trailer Hitch Receiver # DT38MR on your 2019 Dodge Durango GT. This receiver has a factory design as it is designed to mount behind the rear bumper fascia and is accessed through the removable fascia panel. For the wiring you will need to have a custom harness created there as the US spec harnesses we carry integrate the turn signals with the brake lights for the trailer lighting. The Euro wiring keeps these circuits separate. They will also...
view full answer... - Parts Needed to Tow a Small Jayco Trailer with a 2019 Dodge DurangoAccording to my research your 2019 Dodge Durango SXT can tow up to 6,200 lbs and your 2000 Jayco Kiwi 17A has a GVWR of 3,300 lbs so your Durango will be able to easily and safely tow this trailer. To get you setup for towing I recommend picking up the following parts: Draw-Tite Max-Frame Trailer Hitch Receiver - # DT38MR T-One Wiring Kit - # 118617 Universal Wiring Kit - # ETBC7 No-Drill Bracket - # C57202 Redarc Tow-Pro Liberty Brake Controller - # RED24FR Wiring Harness - # RED69FR The...
view full answer... - Will Draw-Tite Max-Frame Trailer Hitch 75162 Fit 2018 Dodge DurangoThe Draw-Tite Max-Frame Trailer Hitch Receiver # 75162 fits the 2004-2009 Dodge Durango. It is not confirmed to fit the 2018 Durango like yours. For a hitch that fits your 2018 Dodge Durango I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # DT38MR. This is a Class IV hitch with a 2" receiver. It installs behind the rear bumper so it will be completely hidden with the bumper panel in place. If you plan on doing some towing, you can use the Curt T-Connector Vehicle Wiring Harness...
view full answer... - Trailer Hitch and 7-Way Wiring for 2020 Dodge DurangoFor your 2020 Dodge Durango that does not have the factory tow package the hitch you would want is the Draw Tite # DT38MR as it has the best towing capacities and has a mostly hidden appearance and then for a 7-way you'd want the # TK22113 and you'd be set. This is the easiest to install and most reliable option available.
view full answer... - Recommended Hitch and Wiring Harness for a 2021 Jeep Grand CherokeeI have a great towing setup for your 2021 Jeep Grand Cherokee. You're going to need a hitch receiver, wiring harness, brake controller, and ball mount. Let's start with the hitch receiver. I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver item # DT38MR. This is a custom fit receiver that mounts to your Jeep with included hardware that requires no welding or drilling into your frame. It has a maximum gross trailer weight of 7,500 lbs and a maximum tongue weight of 900 lbs. This...
view full answer... - Trailer Wiring for a 2018 Dodge Durango GTI agree the Draw-Tite, part # DT38MR, is the best looking hitch available for your 2018 Dodge Durango. If the trailer you're going to be towing has a 4-way connector then I recommend the Hopkins, part # HM11142214. The converter box mounts with two screws instead of one or just double sided tape like the other options. A lot of the times we see issues with wiring it's because the converter box took a hit from not being mounted well enough and damaged it. The extra screw will help...
view full answer... - Hidden Trailer Hitch and 7-Way/Brake Controller for 2019 Jeep Grand Cherokee AltitudeTo install a 7-way on your 2016 Jeep Grand Cherokee Altitude you'd need to first start with a 4-way like the # C62VR which is a confirmed fit so that you could then convert to a 7-way with the # 37185. Now if the trailer you plan to tow has brakes you'd need to go with a different 7-way adapter # ETBC7 which comes with everything needed to install a brake controller like the easy to use and very reliable Brake EVN # TK63VR. This would work great with the Draw Tite hitch # DT38MR which...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Kathleen M
Updated by:
Leah S
Updated by:
Wilson B
Video by:
Dustin K
Video by:
Jonathan Y
Video by:
Thomas T
Video by:
Rick G
Test Fit:
Conner L
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Bradley B
Written by:
Mark S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sean
10/17/2023
After a year I still love this hitch. Looks great, tows great, not a single complaint. As a consumer I feel I am often very critical of products and I honestly have nothing I can find wrong with it. If you’re on the fence, get it! You won’t be disappointed.