Trailer Hitch Recommendation for 2010 Ford E-350 Van

Question

Question:

I have a 2010 E 350 ford van. towing 6300 lb trailerloaded 7100lbs. tongue weight 700 t0 900 lbs which trailer hitch receiver is required/ recommended? thank you

asked by: Fred A

1

Helpful Expert Reply:

I'd recommend going with the Curt Class V hitch part # 14055 that fits your 2010 Ford E-350 as it has way more capacity than you'd ever need, is made in the USA, and installs easily.

expert reply by: Jameson C

1

Answer 1

All of the hitch fits we have for your 2013 Ford E-250 Cargo Van are going to stick out a decent amount behind the rear bumper. There isn't a way around it so if you wanted the higher capacity hitch the part #41906 would be a great option since…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The most hidden trailer hitch available for your 2020 Dodge Durango is without a doubt the Draw-Tite Max-Frame Trailer Hitch Receiver #DT38MR. The 2" receiver for this Class III hitch will actually extend out through the bottom of the rear…

view full answer...

Answer 6

We have a very easy to install 7-way wiring kit that fits your 2020 Dodge Durango with the Tekonsha part #TK22113. This comes with everything needed for a plug and play install of a 7-way on your Durango!

view full answer...

Answer 7

While the Air Lift 1000 Air Helper Springs #AL60824 will not fit your 2022 Dodge Durango R/T we may have one of their universal kits which may fit. To determine if we have something for your R/T I need to know the height of your coil spring when it…

view full answer...

Answer 8

According to the install instructions for the Tekonsha 7-way part #TK22113 that fits your 2018 Dodge Durango the blue wire gets routed through the grommet in the floor on the driver side into the rear cargo area and then routed behind side cargo trim…

view full answer...

Answer 9

You have a couple of options to add a trailer connector to your 2016 Dodge Durango Limited that did not come with the factory tow package. For a 4-Way flat connector you can use #118617. Or, if you need a 7-Way trailer connector, use #TK22113. I have…

view full answer...

Answer 10

My favorite trailer hitch for your 2019 Dodge Durango is the Draw Tite part #DT38MR because it installs behind the rear fascia cut out designed for a hitch so that when not in use you can cover it. See picture. I attached an install video for this…

view full answer...

Answer 11

I'm happy to assist. Attached you will find photos of the Tekonsha OEM Replacement Vehicle Wiring Harness #TK22113. These will correspond with the installation details I've also attached for your 2016 Dodge Durango.

view full answer...

Trailer Hitch Recommendation for 2010 Ford E-350 Van

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching