Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
(282 reviews)
Price: $237.25
In Stock
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 75679
Retail:$423.91
Our Price: $237.25
You Save: $186.66
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (282)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 75679
- Class III
- 2 Inch Hitch
- 4000 lbs GTW
- Visible Cross Tube
- Draw-Tite
- 400 lbs TW
- 4000 lbs WD GTW
- 400 lbs WD TW
- Custom Fit Hitch
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 4,000 lbs
- Maximum GTW when used with weight distribution: 4,000 lbs
- Maximum tongue weight: 400 lbs
- Maximum TW when used with weight distribution: 400 lbs
- Maximum gross trailer weight: 4,000 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
75679 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame
87571 Hidden Hitch Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2009 - 2019 Ford Flex with Dual Exhaust
- 2009 - 2019 Ford Flex without Dual Exhaust
- 2010 - 2019 Lincoln MKT with EcoBoost
- 2010 - 2019 Lincoln MKT without EcoBoost
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Did not fit
- Product did not meet expectations
Customer Reviews
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75679
Average Customer Rating: 4.7 out of 5 stars (282 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.by: Ken T05/10/2019
2014 Lincoln MKT
It took me about two hours to install the trailer hitch by my self. A second person is really needed. The only problem I had is you have to start the driver side first or the bolt holes don't line up. It's a really tight fit against the cargo compartment.
Once you get it on it is a perfect
Overall it I give it 5 stars.
by: Frank from PA 06/13/2018
2017 Ford Edge
ordered this for my 2017 AWD Flex EcoBoost with dual exhaust, I went with the Drawtite brand due to having two other Drawtite hitches in the past... it shipped same day and arrived on time as indicated on my confirmation email.
the packaging surprised me as it was in a “generic”/universal type box, which I would assume fits a multitude of different model hitches (most bigger than this one) it did have a thin plastic cover over the receiver area to protect the powder coat, despite it being lose in the box in was in good shape.
I watched the video and figured that installing it myself shouldn’t be a problem... the installation took around a hour and went pretty much like the video, my 2017 has two exhaust hangers inboard of the rear lower control arms instead of one centered as in the video, but really not a big deal as far as the install.
with all four exhaust hangers in place and the hitch torqued to spec l lowered the Flex down and noticed that the exhaust tips were no longer centered in the valance, upon inspection the issue was clear... a reinforcement bar on the hitch was coming in contact with the hanger on the passenger side and would need to be “clearanced” to allow the exhaust tips to be centered while the exhaust is in a “relaxed position.
without any room to work on the hitch while it was installed I had to remove it and grind off the edge of the reinforcement bar to allow for proper fitment
So after installing, uninstalling, grinding and reinstalling MY total install time was around 3 hours, inspite of the extra work the receiver fits closely to the valance and is not obtrusive.
this hitch came in at about half the price as the factory one from my dealer and should be more than sufficient for my bike rack and 5x8 trailer
by: RYoung06/24/2015
Ford Flex
Bolted right in place. The only problem was getting the paint/undercoating out of the other holes on the Flex frame. That took longer than bolting the hitch on.
Ryoung
6/23/2016
Hitch is still working fine after a year. We use it for or bike rack almost every weekend.
by: Bucky06/01/2016
2009 Ford Flex
Bolting on the hitch took about 15min and was easy to do with the bolts provided and after watching the quick video on installing it. Wiring it up on the other hand took a while. The instructions that came with the electrical was easy to follow and super helpful...finding a path for the wires underneath the car from the battery back to the hitch is what took the longest.
by: Sam02/18/2023
2008 Ford Crown Victoria
Problem is with etrailer not the actual product. It wad packaged carelessly and that caused damage in shipping. Not to mention I could've ordered the same product from [online] and had it in 2 days instead of the 8 days it took etrailer to ship. The product itself was fine, the 1 star review is for etrailer itself. Took over a week to receive my order from the time it was placed. Had I known I would be waiting that long I would've just ordered from [online]. Once I finally received my order my hitch was thrown into a box that was way too big for it along with the wiring harness I ordered smashed under the hitch inside the box. No protective packaging of any sort, just 2 items haphazardly thrown into a huge box to bounce around across the country. Wiring harness was still usable but the packaging and instructions were crushed and destroyed as well as my hitch arrived slightly bent and had several large chips in the powder coating. Needless to say I believe this will be my first and last order from etrailer
Jenny N.
2/20/2023
I am sorry to hear about the rough condition that the hitch and wiring arrived in. I will have our Customer Service team reach out to you.
by: cutcsa 5508/02/2019
I was checking on the internet to get a new trailer hitch for my 2014 Lincoln MKT.
I got my part and it fits perfectly, I am way super satisfied and will definitely buy from etrailer again! The how-to videos are great. This made installation a little more comfortable. Especially when you do not perform this type of work every day. The parts were of high quality and are working as expected.
Thank you
by: John05/05/2023
2016 Ford Flex
The Draw-Time trailer hitch went on without a "hitch". The process of ordering the correct components (hitch, wiring harness and 4 pole plug mount) for my 2016 Ford Flex was nearly effortless with only one call to clear up one concern. etrailer's videos that were vehicle and product specific made for a great experience. Thanks
by: Kim02/08/2018
Ford
Great looking and fairly easy to install. I would recommend having a second person to help lift and hold it in place. It is quite a chore doing it by yourself. I used a couple of jackstands to help support the weight of it while installing, but another's help would have been great. Sal at etrailer was most helpful in taking my order and answering all of my questions. When it was all done, I was happy with the way it looked. I don't think it hangs too low, especially since it was a fraction of the cost as an OEM one from Ford.
by: John06/19/2021
2019 Ford Flex
Thank you for getting my items out to me so quickly. I've been having issues finding the right tow package for my vehicle. I had to send 2 back when I tried ordering from other places.(both auto part companies)Neither ask the right questions about my vehicle. It was nice to deal with such professionalism from the employees at etrailer.#1 They asked the right question about my vehicle to be sure it fit correctly & #2 They got my item to my door step fast. My only regret was I didn't deal with etrailer 1st and save myself a lot of time and headaches. Thanks Again...
Sincerely,
by: Christian j05/30/2015
2014 Ford Flex
I have to say after reading some other reviews before I had received my trailer hitch. I felt I would either have an easy or difficult install. I had done the install by myself and it took less then an hour. Over all the products are great and it was a smart choice to buy from entrailer.
by: Vince09/16/2016
2016 Ford Flex
Good product. Fits exactly as expected. Installation took about an hour as expected too. Only one issue which is why I gave it 4 stars. After it was installed, I tried to insert the pin and it wouldn't go through. After closer inspection, there was a metal burr restricting the pin from passing through, so I had to use a metal file to file down the burr to allow the pin to pass through properly. See attached photo. Other than that, no issues. Also, the instructional video was VERY helpful and made the installation quite easy to do.
by: Alejandro03/28/2018
2015 Ford Flex
Product was high quality well made easy to install with instructions. The wiring kit was Plug and Play.
It looks factory installed.
by: D08/27/2020
2017 Ford Flex
The receiver was a little dinged up with spots of powder coating chipped off but... it’s a trailer hitch. The install was simple and as directed in the videos.
by: James C06/25/2015
Good, sturdy hitch. Fit perfectly with no problems. Easy to install, took about 30 min with no other help.
Only negative is that it really isn't hidden as the bars to the side hitch is visible from behind.
Received the hitch in 3 business days as promised.
by: Adam12/11/2017
Ford Flex
I was afraid of doing this myself but after watching the video and taking a quick look at the pictures, I ordered the hitch. So easy to install! Looks amazing too. Can't wait to get outside and start using it.
by: John08/25/2021
Perfect fit and as a master mechanic of 25 years the installation was easy, the only thing was I wish I had a drive on lift and a hydraulic jack. Doing it on the ground was no fun and it took about 2 hours but it’s in and everybody happy. Thanks
by: Joshua04/17/2018
2014 Ford Flex
Excellent fit. Installed myself in about 25min. Main use is for a bike rack.
by: Patrick01/16/2023
2013 Ford Flex
The deliver time was excellent. This hitch is a direct bolt on, but the right side was very tight once installed, causing a very tight space to re-hang the rubber mount for the right muffler. The wiring kit was a plug and play, however each side should have been four inches longer, as it was made, it was barely long enough. As for value, it was ok, after I ordered from etrailer.com, I found a direct fit hitch and wiring kit locally for less money.
by: Steve 08/22/2021
2010 Ford Flex
Very prompt delivery and a very sturdy product, the hitch receiver is very solid/heavy. Didn't take too long to install. My install was on a 2010 Ford Flex without twin exhausts. One note to mention is that there is no need to undo the rubber exhaust hanger as its main mounting bracket has to be removed as part of the hitch installation.
Steve
8/23/2022
Still going strong, I initially used it for a bike rack but am now towing a trailer with it.
by: James F03/17/2023
Ford Flex
Great experience - added a trailer hitch on my Fire Flex. I had choices, good prices and lots of info (including installation instructions). The install was very easy. Highly recommend!
by: Terry 02/12/2024
2016 Ford Flex
It is a well made hitch and easy to ins tall
by: Bill03/03/2022
Easy installation instructions and works as described.
Bill C.
3/4/2023
Hitch has worked as described. If I need any additional hitches, your company will be my first choice.
by: Zephyr Eadon12/15/2019
Install went well enough, the reason for the low rating was for the fact the hitch after installation was not square to the vehicle.
by: Terry B03/13/2014
Came as described, purchased the wiring harness as well. Finished install in less than an hour.
by: Frank12/08/2017
2009 Ford Flex
The hitch went on my 09 Flex without any problems. Very easy install, fast shipping, great value, and excellent customer service.
25
283
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Difference Between Hidden Hitch 87571 and Draw-Tite # 75679Part 87571 and # 75679 are the same hitch. Hidden Hitch was a brand owned by the same company that has since dissolved, so the hitch labeled with the Draw-Tite sticker and number is now the part number for both. The brand name was the only difference so now they just all have the Draw-Tite sticker so if you have found a Hidden Hitch it is just old stock. I've attached a video of the installation for you.
view full answer... - Is a Trailer Hitch Cross Tube Visible Beneath the Rear Fascia on a 2010 Ford FlexAll of the available hitches for the 2010 Ford Flex including the Draw-Tite Class III, # 75679, will be at least partially visible at the rear of the vehicle. The receiver and the crosstube will be visible from the rear of the vehicle.
view full answer... - Why Would Trailer Hitch Install Hardware Seem Too Large to Fit VehicleThe problem you are experiencing is pretty common for vehicles that have seen a couple winters. What happens is the weld nuts get a bit of corrosion in them and that prevents the bolts from being able to thread. This makes it seem like the nuts are too small. I checked your order notes and you're up north where the winters are pretty harsh too so that makes this even more likely. What you'll need to do it clean the weld nuts out so that you can thread the included bolts. I have included...
view full answer... - Trailer Hitch Recommendation for 2018 Ford FlexThe best hitch for your 2018 Ford Flex is the Draw Tite part # 75679 because it has the shortest install time and better price compared to the competition. It also gives you a 2 inch hitch which is the most popular hitch size for hitch accessories and has great capacities.
view full answer... - Trailer Hitch Recommendation for 2009 Ford Flex to Carry Scooter CarrierThe lift manufacturer is not giving you accurate information. Tongue weight figures are the same for if the setup is towing or carrying a hitch accessory. If anything you would want to be more cautious not exceeding that figure with a non-supported load like a carrier than with a trailer. For your 2009 Ford Flex you will need to install a Class III hitch to carry the carrier and the scooter. For that you would need our Draw Tite hitch part # 75679 which has a 400 lb tongue weight capacity.
view full answer... - Any Fascia Trimming for Installation of Draw-Tite Class III Hitch # 75679 on 2010 Ford FlexAccording to the installation instructions, there is no fascia trimming or other modification necessary to install the Draw-Tite Class III # 75679 hitch on your 2010 Ford Flex. You can see the installation instructions and view an install video by clicking on the provided links.
view full answer... - How to Pick Out the Correct Rise/Drop Ball Mount to Tow Trailer LevelIn order to pick out the correct rise/drop ball mount you need to take a couple measurements and do one simple calculation. Basically you want to go with the ball mount that will allow your trailer to be towed level. To pick out the correct one you will need to measure the distance from the top of your hitch opening to the ground and then with your trailer sitting as level as possible measure from the bottom of the coupler to the ground. The difference between these two measurements will...
view full answer... - Does Higher Tongue Weight Capacity for Weight Distribution Only Apply to TowingIf your trailer hitch is rated for a higher tongue weight capacity with the use of a weight distribution system, that would only apply to when you are towing with that system. The higher capacity with that system does not transfer to things such as cargo carriers.
view full answer... - Torque Specifications for Installing Draw-Tite Max Frame Trailer Hitch Receiver # 75679When installing the Draw-Tite Max-Frame Trailer Hitch Receiver # 75679 referenced in your question, you will torque all M12 x 1.75 CL8.8 fasteners to 68 lb ft. I have included the complete installation details that you can also look through. All of the necessary hardware is included with the trailer hitch.
view full answer... - Trailer Hitch Recommendation for 2016 Ford Flex with Dual ExhaustFor your 2016 Ford Flex with dual exhaust we have the Draw Tite hitch part # 75679 that is a confirmed fit and will work well. It actually fits the versions of your vehicle that have dual exhaust and the versions that do not. The picture I attached shows the hitch installed on a version that has the dual exhaust. I also attached an install video for you to check out as well.
view full answer...
- Trailer Hitch Receiver With The Most Ground Clearance For 2009 Ford FlexThanks for the picture! The Draw-Tite Trailer Hitch Receiver # 75679 you were looking at will measure 12-3/4" from the ground to the top inside edge of the receiver when installed on your 2009 Ford Flex, so it will give you a little more ground clearance as your current hitch measures 12" based on the picture you provided. The # 13551 you mentioned is only confirmed to fit the 2009-2019 Ford Flex without dual exhaust, so it is not universal. I included a video of the # 75679 being installed...
view full answer...
- Trailer Hitch Recommendation for 2017 Ford FlexFor your 2017 Ford Flex the Draw Tite hitch aprt # 75679 that you referenced is a confirmed fit and would work well for you as it fits models of the Flex that have dual exhaust as well as models that do not have dual exhaust. I attached an install video for this hitch for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise...
view full answer... - Recommended Hitch and Wiring for 2009 Ford FlexTypically the components that are included to make a vehicle considered a tow package are a trailer hitch and wiring. We do have exactly what you will need to outfit your 2009 Ford Flex for just that. First lets start with the hitch, I recommend the 2 inch Draw-Tite Hitch # 75679, because it will fit whether you have a the dual exhaust or not and will not require you to use a stabilization strap like many Curt hitches do for non-trailer loads. I have linked an installation video of...
view full answer... - Towing Capacity and Trailer Hitch Recommendation 2010 Ford Flex for Towing 2,000 lb Boat TrailerI looked up the towing capacity of your 2010 Ford Flex and it has a capacity of 4,500 lbs total trailer weight which means you'd pretty easily be able to tow a 2,000 lb boat and trailer. You'll need a few things to do this safely. First is a hitch like the Draw Tite part # 75679 that you referenced. This has a 2 inch opening which means it will have plenty of capacity and is also the size that is most popular with hitch accessories. I attached an install video for this for you to check...
view full answer...
- Higher Capacity Trailer Hitch for a 2013 Lincoln MKT with Factory 1-1/4 Inch Trailer HitchIf the hitch is rated for 2,000 pounds gross trailer weight then the tongue weight capacity will be 200 pounds, possibly 300 pounds. Either way the motorcycle carrier and motorcycle itself are exceeding the tongue weight capacity of the hitch. A higher capacity trailer hitch such as # 75679 is definitely recommended (as long as the factory hitch is not welded on). It looks like in the owner's manual that the hitch itself determines the towing capacity of the vehicle. So if you switched...
view full answer... - Does Draw-Tite Class III 2 Inch Hitch # 75679 Fit 2012 Ford Flex EcoBoost With Dual ExhaustThe Draw-Tite Class III 2 Inch Hitch, part # 75679, will fit your 2012 Ford Flex EcoBoost with dual exhaust. The difference in the installation is that you will have to lower both mufflers to be able to install the hitch above the exhaust. I am including a link to the installation instructions on the Draw-Tite hitch. If you plan to do some towing, I recommend the etrailer Ball Mount Kit, part # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag. For...
view full answer... - Higher Capacity Trailer Hitch Recommendation for 2013 Ford FlexSo we can help you with a higher capacity trailer hitch for your 2013 Ford Flex like the Draw Tite part # 75679 which has a 4,000 lb trailer towing capacity for if you have dual exhaust, or if you do not have the dual exhaust you can install the Curt hitch part # 13551 which has a 5,000 lb capacity. Only Ford would be able to tell you what parts your vehicle would need to have the increased towing capacity of the tow package. It could be just a hitch and a transmission or engine oil cooler...
view full answer... - Recommended Trailer Hitch Receiver and Wiring for 2014 Ford Flex With Dual ExhaustFor your 2014 Ford Flex with dual exhaust I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75679. This is a custom-fit Class III hitch with a 2" receiver. It features a bolt-on installation along with an e-coat base and a powder coat finish for rust protection. This hitch also comes with a limited lifetime warranty. For wiring, I recommend the Tekonsha T-One Vehicle Wiring Harness # 118472. This plugs into existing wiring and will provide you with a 4-way connection to power...
view full answer... - Recommendation on a Trailer Hitch and Wring Harness for a 2014 Ford Flex w/ Dual ExhaustFor your 2014 Ford Flex with dual exhaust, I recommend the Draw-Tite Class III Max Frame Trailer Hitch, # 75679. This hitch has the 2 inch receiver opening and a tongue weight capacity of 400 lbs and this hitch has a towing capacity of 4000 lbs. The exhaust must be lowered during installation, but the Draw-Tite hitch will require no drilling in to the vehicle's frame to install. the Tekonsha T-One Vehicle Wiring Harness, # 118472, is the wiring solution I recommend. This harness will...
view full answer... - Trailer Hitch and Hitch-Mount Cargo Carrier for 2014 Ford FlexWhen a vehicle that has rear lift gate sensors has a hitch installed sometimes the middle sensor will be blocked by the hitch receiver tube. Usually the other sensors continue to function without incident and so in practical terms you just need to swing your foot near one of the outside sensors. If you add a no-drill-install hitch like # 75679 and also install a hitch cargo carrier like # C18151 you may need to approach the vehicle from the side in order to activate the lift gate. I linked...
view full answer... - Trailer Hitch and Wiring for a 2012 Ford Flex with EcoboostFor Draw-Tite trailer hitch # 75679 it will fit a 2012 Ford Flex with or without the Ecoboost engine. The installation instructions, which I have linked for you, are the same for either configuration. Since the Ecoboost models have dual exhaust, the sections in the instructions that deal with lowering the exhaust will apply to both sides. I also recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. For wiring use...
view full answer... - Trailer Hitch and Wiring Recommendation for 2013 Ford Flex with Dual ExhaustThere are trailer hitches available for the 2013 Ford Flex with dual exhaust but they are not rated for 5,000 lbs. The trailer hitches for the Ford Flex with dual exhaust are both rated for 4,000 lbs. The hitches are designed to fit around the dual exhaust system which could be why their rating is a bit lower. It is a good idea to check the owner's manual for how much the vehicle itself is rated to tow because it may be under what either hitch is rated for. I recommend Draw-Tite part #...
view full answer... - Hitch Installation Specs for the Draw Tite Hitch part # 75679 on a 2012 Ford FlexThe torque specs for the Draw Tite Hitch part # 75679 that you referenced are listed in the installation instructions that I attached to the right. For liability reason I cannot list them here since they are subject to change. I attached an install video for this hitch for you to check out also. For trailer wiring you would want the Tow Ready wiring harness part # 118472. For ball mounts I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin...
view full answer... - Trailer Hitch and Wiring for a 2013 Ford Flex with Dual ExhaustYes, Draw-Tite trailer hitch # 75679 will fit a 2013 Ford Flex with dual exhaust. Having EcoBoost or not does not matter. It also fits models with single exhaust. I have included links to the installation instructions and a link to a video showing a typical installation for you. If you plan on doing some towing I also recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip and a storage bag. For trailer wiring you can use T-connector,...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Patrick B
Video Edited:
Dustin K
Video Edited:
Chris R
Written by:
Lindsey S
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Jared G
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Updated by:
Laura H
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Isabelle B
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ken
5/11/2020
At this point it look and feel like a factory installed unit.