Difference Between Hidden Hitch 87571 and Draw-Tite # 75679

Question

Question:

What is the difference between Hiden Hitch 87571 and 75679 for 2010 Lincoln MKT ? Thanks

asked by: Cecil H

0

Expert Reply:

Part 87571 and # 75679 are the same hitch. Hidden Hitch was a brand owned by the same company that has since dissolved, so the hitch labeled with the Draw-Tite sticker and number is now the part number for both. The brand name was the only difference so now they just all have the Draw-Tite sticker so if you have found a Hidden Hitch it is just old stock.

I've attached a video of the installation for you.

expert reply by: Jason S

0

Answer 1

For a 2012 Ford Flex without Ecoboost the correct Curt hitch is #1355 or the etrailer hitch #e95KR. These hitches are very similar and either would be a great choice. The most popular choice is the Curt #13551. I would recommend going with the one…

view full answer...

Answer 2

The Draw-Tite #75679 uses 4 Hex Bolt M12 x 1.75 x 40mm CL8.8 and 4 Conical Toothed Washers 1/2”. You can get a replacement hardware kit by putting that hitch part number in the field for "Hitch Item Number" on the part page for #RHK.…

view full answer...

Answer 3

The trailer hitch I recommend for a 2016 Lincoln MKT is the Draw-Tite Max-Frame Trailer Hitch Receiver part #75679 which is a direct bolt-on fit with no cutting or drilling required. The Draw-Tite Trailer Hitch Receiver has a durable powder coating…

view full answer...

Answer 4

We sure do! For your 2013 Ford Flex Limited with the dual exhaust I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e52AR. This Class III hitch is confirmed to fit your vehicle and it will use…

view full answer...

Answer 5

The best hitch for your 2018 Ford Flex is the Draw Tite part #75679 because it has the shortest install time and better price compared to the competition. It also gives you a 2 inch hitch which is the most popular hitch size for hitch accessories and…

view full answer...

Answer 6

The problem you are experiencing is pretty common for vehicles that have seen a couple winters. What happens is the weld nuts get a bit of corrosion in them and that prevents the bolts from being able to thread. This makes it seem like the nuts are…

view full answer...

Answer 7

Your picture didn't make it through but the Curt instructions we have show two bolts that attach with existing weld nuts and then two that attach through existing holes that require fish wire to access. We get the instructions directly from…

view full answer...

Difference Between Hidden Hitch 87571 and Draw-Tite # 75679

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching