Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
(463 reviews)
Price: $222.07
In Stock
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 75599
Retail:$361.95
Our Price: $222.07
You Save: $139.88
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (463)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 75599
- Class III
- 2 Inch Hitch
- 3500 lbs GTW
- Concealed Cross Tube
- Draw-Tite
- 350 lbs TW
- 5000 lbs WD GTW
- 500 lbs WD TW
- Custom Fit Hitch
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum GTW when used with weight distribution: 5,000 lbs
- Maximum tongue weight: 350 lbs
- Maximum TW when used with weight distribution: 500 lbs
- Maximum gross trailer weight: 3,500 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
75599 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame
87454 Hidden Hitch Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2001 - 2006 Acura MDX
- 2003 - 2008 Honda Pilot
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Too difficult to install
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75599
Average Customer Rating: 4.9 out of 5 stars (463 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.by: CW03/26/2014
2003 Honda Pilot
Installed on '93 Honda Pilot in 1 1/2 hours while installing new Tow Ready 4- Flat Universal Mounting Bracket (118149) and Tow Ready One Connector wiring harness (118336). Easy install, did not have any trouble cleaning out those previously unused bolt holes on the right side, used wire brush and penetrating lube. Installed tow bar supported on top of grand kids red wagon with side rails, no extra hands required. Did not have to lower exhaust, only removed tow hook from left side. Fits snugly with good clearance from frame and muffler. Tow bar can barely be seen except for receiver.
by: Frank D.08/27/2012
2012 Acura MDX
I installed the hitch on a 2005 Acura MDX. Was easy, and with another set of hands a breeze to install. The quality of the hitch is great, and my experience with other Draw-Tite hitches in the past has been terrific. This is the fourth hitch I have ordered from Etrailer, and each time has been a pleasure. Their selection, ease of website, and great customer service keeps me coming back.
My next project is a 2012 CX7. I'll be in touch soon!
Thanks Again,
Frank D
Mark
3/3/2015
Frank, I have a 2006 MDX. Did you have to modify the bumper trim kit in any way for the receiver?
Patrick B.
3/4/2015
There is a under-vehicle fascia piece that has to be removed for the hitch to be installed. You do not have to cut or modify it though, so if you ever want to remove the hitch, it can be re-installed. Check out the video I linked to, the 2:20 mark or so.
Helpful Links
by: George C05/05/2014
Excellent Product. Installation was so simple product could be renamed Draw-Tite's Easy-Fit hitch. Etrailer.com installation video was also excellent. The Installation Team (Me [67 years] & Wife {64 years]) reported absolutely no problems during installation. Highly recommend both Etrailer.com website and Draw-Tite trailer hitch. Post-installation photo attached (just before cranking spare back up into place and tools cleanup). Hitch wiring was subsequently installed, also with no problems. Etrailer.com installation video for that was also excellent.
by: Julie03/14/2020
Arrived the day after I ordered it, my son installed it for me without any problems. I purchased to use with a bike hitch to carry grandkids bikes.
Julie
3/15/2021
Great!??I use it all the time! Just used yesterday for bikes and will use this summer to haul kayaks
by: Tim - Cinti10/15/2013
Easy order process, great price and great product.
I'm much slower than the other guys in terms of time to install. Took me about 4 hrs, with no helper. Time was significantly extended by having to clean up the 3 threaded bolt holes on the passenger side. Had to rent tool from Auto Zone, and still took a lot of PB Blaster, wire brushing to even get the clean up tool to start into the lead in threads. Then was like 1 - 2 turns, back it out, and repeat.... for all three holes. ~2 hrs later, all the bolt holes were clean and easily accepted the new bolts.
Other than that, no real issues.
Great instructional videos for Receiver and Wire kit.
This is my second purchase from ETrailer, and will def be my online go-to site for all my trailer needs.
by: Greg C.07/03/2018
Pontiac Trans Sport Van
I purchased the receiver for a friend that wanted to be able to minimize hauling everything inside and be able to transport a luggage carrier and bike rack when needed. She was very surprised at how easy it was to install. From online ordering to installation the process was very user friendly. Quality product and great service.
by: Geoffrey B06/06/2011
Love the hitch! It went on relatively easily and looks great installed.
Not a hitch issue, per se, but I realized later I should have dropped the spare to make the install easier, since the spare appears pinched between the hitch and the rear body now that I cranked down all the bolts.
Also, install time was lengthened due to rusting of the uncovered threads on the muffler side of the vehicle. I used wd-40, the old bolts, and a lot of patience to make the threads useable from 4+ years of disuse. Someone recommended using a tap-kit to "freshen up" the threads. I would have gotten the proper tap if I hadn't done the install at night. Again, this is a vehicle problem, not a hitch kit problem.
Heh. We also learned that hitch covers get stolen, so we'll be ordering locking hitch receiver cover next time.
Heh. We also learned that hitch covers get stolen, so we'll be ordering locking hitch receiver cover next time. " />
by: Jeff K.06/18/2012
2007 Honda Pilot
Perfect fit, easy installation, great price, outstanding quality, excellent service! Ordered for a for a 2007 Honda Pilot on Sunday afternoon and delivered on Wednesday. Installed in about 30 mins, hitch is almost completely hidden other than the receiver. Etrailer is highly recommended and I will definitely buy from them again. Thanks for the easy and professional transaction.
by: John10/06/2018
2006 Acura MDX
Followed the instructions on the video(s). Installed hitch and wiring harness. hooked up tow bar and flat towed a car 2000+ miles.
by: Jonathan Tea08/16/2012
2006 Honda Pilot
Very high quality product, arrived in excellent condition. Very easy
to install with the video online was helpful, I didn't lower the muffler
as the instruction said. From the time to open the box and completed the installation is 33 mins, I did used the jack to support the center of the trailer hitch to make installation much easy for myself. Now it's look fantastic love black gloss and it's made in "USA", Etrailer, you guys "ROCK"....
by: Luis V.02/27/2017
2004 Honda Pilot
I ordered the Draw-Titer Max-Frame Trailer Hitch Receiver and the T-One Vehicle Wiring
Harness for my 2004 Honda Pilot. They came earlier than I expected and took me 20 minutes to install them by myself.
by: Octavio04/01/2016
2007 Honda Pilot
I used many times works great for my use I carry 4 bicycles to the trails had lots of fun , also attach a trailer platform to move stuff , no complains thank you George very respectfully , Octavio
by: Greg M12/23/2013
2007 Honda Pilot
Bought wire harness and hitch. Installation of both took under and hour. The videos made it simple and was easy to follow. Did it myself. Saved hundereds over shop fees.
by: Drew in Nashville, TN05/29/2013
2003 Honda Pilot
This DrawTite trailer hitch was fairly easy to install. Great value & fast shipping from eTrailer.com!
by: Dan S05/08/2017
2006 Honda Pilot
Trailer hitch fit like a glove on my 2006 Pilot. Easy installation, no drilling, and is heavy duty. Looks and works well for me. I would recommend your products to anyone. Pulls my Little Red Wagon with ease !!
by: Dane H. 06/25/2014
2008 Honda Pilot
I am very satisfied with my purchase. The instruction videos made installation quick and easy. The fasteners provided exceeded OEM standards. Best of all, it looks great and makes the vehicle much more useful (don't have to borrow a friend's truck to tow).
by: John01/14/2018
Sierra. all is good. forgive me for not completing your form but on the middle of a move and packing away! you were terriffic ... A+!
service was fast and without a hitch! pun intended!
Excellent service, Helpful videos and am very happy.
Pictures attached.
by: Bradley07/21/2018
Easy install. Impact driver only way to remove factory tow hook. I tapped out the holes in the frame rather than using the recommended brush. The entire unit is hidden behind my rear bumper. Beautiful final product.
by: Sam T.04/13/2012
2005 Honda Pilot
Product was easy to install took about 15 minutes.
They need to work on the shipping box, mine arrived with the hitch hanging out of the box
by: Matthew04/05/2013
2008 Honda Pilot
This was one of the easiest purchases and installs that I have done. From the ordering to the installation was the quickest and smoothest transaction. The product was as described and installation was less than 30 minutes. Great product and company...
by: Joe B11/03/2016
Honda Pilot
The service from etrailer in ordering my hitch was excellent. Had a few questions and they answered every one clearly. It was delivered earlier than expected.
Some folks wrote about problems with the install. I found it extremely easy on my Honda Pilot. I used the box it came in to support the other end while bolting up the first.
Even the wiring harness that folks had fits with was quick and to the point. The unit is solid and easy to use. I gave it only a 4 because I'm sure there must be better, stronger hitches on the market, but for the money, the etrailer hitch was a great buy. I've ordered from them again since and would recommend them to my friends and enemies.
Thanks etrailer for a great product and great service.
Joe B.
11/15/2017
Everything is still working as expected.Thank you for being there.
by: Ken P03/21/2016
Honda Pilot
I am very happy with the 75599 trailer hitch. I installed it on my Honda Pilot. It went on very easy, It took less then an hour. Only had to remove one hanger for the muffler. Only problem I encounter was over tightening and snapping were you screw into the frame. Make sure to follow and use the torque measurements. Would definitely recommend it for any one looking to add item. I was able to purchase and pull a boat home the same day.. Very happy. I also purchased the quick connect trailer lights kit. That couldn't have gone any easier also. You tube videos helped along the way.
Ken P.
2/20/2018
All of the items I ordered and placed on my wifes car have been working great. I am very pleased with the quality and service they have provided me.
by: Steve H07/31/2013
2003 Acura MDX
This is the second hitch I have purchased from e trailer. The hitch arrived on time and the installation directions were straight forward and thorough. The hitch was easy to install and is an excellent hitch. Although I did not have anyone available to help me, I was able to install the hitch in about 30 minutes (I am 72). The previous hitch was for my Toyota pickup and was also easy to install and an excellent hitch.
I have also purchased two wiring harness and they are easy to install and an excellent product.
Thank you for your great products, videos and service
Steve H.
1/30/2015
Could not be happier with the products, the perfect fit, the fast deliver and the ease of installation I installed them myself as well as one for my Tacoma truck that I bought about 2 years ago However, I do recommend a second person to help as you state in your directions
by: Bret B.05/22/2014
2010 Honda Pilot
Installed on a 2003 Honda Pilot. The hitch was delivered in 3 days from the purchase date. It was received in perfect condition. This is the third hitch I have installed on different vehicles over the past couple years and it was by far the easiest installation yet. It took me longer to clean out the bolt holes than it did to install the hitch itself. I removed the tow hook from the left side so the bolt holes were in good condition. It took me about an hour to clean out the 3 bolt holes on the right side. Tip - I sprayed the holes with liquid wrench and used a 20 gauge shotgun cleaning brush in a cordless drill to clean out the holes. I wire brushed the bolts I removed from the left side tow hook and used them to run in a little bit and then removed. Cleaned the bolts and the hole again with liquid wrench and wire brush. Repeated process several times until I could get the bolts to go all the way in using a ratchet. Once the bolt holes were clean, it took about 10 minutes to complete installation. Note I did not have to drop the exhaust, it easily slid by the muffler. This is a great hitch! I would highly recommend both the hitch and purchasing it from etrailer.
Bret B.
5/26/2015
Yes I am still completely satisfied with both the hitch and wiring harness.
by: Neil Hirte06/27/2019
Great and solid! Delivery was SO FAST TOO.
Dude at etrailer wrapped it up on a Sunday night!?!? I got a shipped email like 3 hrs after purchase! Bam! Very pleased to get it 2 days later especially with free shipping. Kudos to etrailer!
A side note: the bolt holes on honda pilot on the passenger side were open from the factory, the driver side has a tow hook with bolts in it. The driver side was fairly easy to attach however the swelling of holes on the passenger side i had to gently TAP for threads to go. Just FYI may be a slight pain depending on year or condition of the frame on your vehicle.
That being said over all i am very pleased with the seller and the installation and build of this hitch. Hope this is helpful.
Neil H.
6/29/2020
Been great! No troubles. Happy customer.
25
468
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- How Do Hitch Extenders Affect Tongue Weight RatingsWe don't carry the bike rack you referenced, but if the extender installs onto the rack as a solid piece then no, your tongue weight rating would not be affected. If its just a tube that slides into your hitch and then the rack installs into that loosely you would lose 50 percent of your tongue weigh rating. For more information on hitch extenders check out the FAQ article I attached on them.
view full answer... - Using Draw-Tite Class III Receiver Hitch, Part # 75599 to Carry Bike Rack on 2003 Honda PilotI would recommend the Draw-Tite Class III Receiver Hitch, part # 75599. This hitch would be perfect for carrying a bike rack, as well as other accessories such as a cargo carrier. If you decide in the future that you want to tow a trailer, the Class III receiver will allow you to make full use of your vehicles towing ability. The install is not too difficult, if you have reasonable mechanical ability, you should be able to install it in an hour or less.
view full answer... - If a Vehicle Requires Weight Distribution To Tow a Certain Weight Is the System Required for TowingIf your trailer weighs enough that your tow vehicle requires the use of a weight distribution system when towing then yes, you would have to connect the system and disconnect it every time you decide to tow. Installing a weight distribution system initially is a bit more involved that just hitching up the trailer. But once it is set up properly the only additional steps would be that you need to connect the spring bars. Which this does add time to the process, but it's really not that...
view full answer... - Trailer Hitch for a 2006 Honda Pilot w/ Full Size SpareThe Draw-Tite Class 3 Trailer hitch, item # 75599, will fit the 2006 Honda Pilot with a full size spare tire. I attached a photo, installation instructions and an installation video for this product on a 2004 MDX like yours for you to check out also.
view full answer...
- Does Draw Tite Hitch # 75599 Fit 2003 Acura MDX TouringI checked with Draw Tite and their hitch part # 75599 that you referenced does fit your 2003 Acura MDX Touring as they list the hitch as a fit for "all models" which includes yours. This hitch also fits Honda Pilots and we've seen pictures back from customers who had a similar type of exhaust setup where the pipes only exit on the passenger side. This will not interfere with the spare either.
view full answer...
- What is the Distance from Bolt Hole Center to Bolt Hole Center on Draw-Tite Hitch # 75599I went out and measured a Draw-Tite Max-Frame Trailer Hitch Receiver # 75599 and found that the distance from bolt hole center to bolt hole center from one side of the hitch to the other is 56 inches. I attached installation instructions and a installation video for this product as well.
view full answer... - Installing Trailer Hitch Around Muffler on a 2004 Honda PilotThe Draw-Tite # 75599, is the correct hitch for the 2004 Honda Pilot. This hitch is installed after removing three rubber muffler hangers to lower the exhaust. These hangers are removed using spray lubricant like WD-40 and a pry bar to push the rubber hangers off of the mounting post. Some Honda Pilots do not require the removal of the rubber muffler hangers to install the hitch (see video). You can test fit the hitch to be sure before removing the hangers. To reattach the muffler hangers,...
view full answer... - Muffler Hits Receiver Hitch on a Acura MDX 2004I have linked a picture from below to show you how the Draw-Tite Max-Frame Trailer Hitch Receiver item # 75599 you referenced is suppose to look when installed on a 2004 Acura MDX. I would check to make sure your muffler and exhaust hasn't been bent or damaged in a way that would cause it to rub on the hitch. I have also linked the instructions and a video of the installation process so you can verify the hitch has been correctly installed.
view full answer...
- How to Pick Out a Weight Distribution System for a 2006 Honda Pilot EX-L AWDWeight distribution systems apply a different angle of torque on the hitch and vehicle they are installed on than not using one. A lot of the time the problem isn't that the hitch can't handle the WD system it's that the vehicle's attachment points can't handle the added stress. The spring bars of a system take and apply the tongue weight of the trailer and transfer it through the hitch and vehicle back up to the front axle. You can imagine that puts a different kind of strain on a vehicle/hitch...
view full answer... - Draw-Tite Max-Frame Trailer Hitch # 75599 WidthI went out and measured a Draw-Tite Max-Frame Trailer Hitch Receiver # 75599 and found that the distance from bolt hole center to bolt hole center from one side of the hitch to the other is 56 inches. I attached installation instructions and a installation video for this product as well.
view full answer...
- New Trailer Hitch Is Touching Exhaust On 2005 Acura MDXThere are a couple of ways you can fix the problem with the exhaust touching the new trailer hitch. I have attached a helpful article that explains how to eliminate the rattle caused by this problem. The first suggestion is to use a pair of channel locks or vise grips and bend the hanger attached to the exhaust. This should move the exhaust far enough away to stop the rattle. If that does not take care of the issue, you can replace the rubber hangers for the exhaust. Over time these can...
view full answer... - Why Would Holes Behind Crossmember of Draw Tite Hitch For 2007 Honda Pilot Not be AccessibleOn some models there is a fascia covering that needs to be removed to access the some of the bolt holes. If you check out the picture I attached you can see what I am referring to. It sounds like that is what you are referring to. I also attached a link to the install instructions for you to check out as well.
view full answer...
- Should Rusty Hitch of 2006 Honda Pilot be ReplacedI wish I could say it covered rust as we know that's a pretty common occurrence for the hitches especially in Northern climates but unfortunately it does not. If you are unsure about the integrity of the hitch it would be a good idea to replace it with a new # 75599. If the rust is only on the surface you are fine, but if the rust is eating through the metal you definitely have a problem.
view full answer...
- Do Tow Hooks Need to get Removed to Install Draw-Tite Hitch on a 2008 Honda PilotWhen you install the Draw-Tite Hitch part # 75599 on a Pilot like your 2008 model the tow hooks would need to be removed and would not get reinstalled. If you check out the picture I attached it shows this hitch installed on a similar Pilot as yours that also has the heat shield setup you described.
view full answer...
- Trailer Hitch Recommendation for 2003 Honda PilotYou are correct that the trailer hitches available for your 2003 Honda Pilot all have the same towing and tongue weight capacities. This hitches all carry Class III ratings, are compatible with weight distribution system, and have 2 inch x 2 inch receiver openings. These hitches have minimal differences. For example, the curt has an extra mounting bracket above the receiver opening. The Draw-Tite hitch will require the exhaust to be temporarily lowered for installation. Out of the hitches...
view full answer... - Replacement Hitch Installation Hardware Kit for Hidden Hitch Class III Hitch 75599We can help you with replacement hitch installation hardware for your Class III Draw-Tite # 75599. All you need to do is enter the part # RHK into our search box. Then simply enter the hitch part # 75599 in the box and choose Draw-Tite from the manufacturer drop-down menu. We'll then put together all the correct fasteners for your hitch. You'll need a torque wrench to ensure all fasteners are secured to the manufacturer's specs; this information is included in the linked instructions....
view full answer... - What Vehicles Does the Draw-Tite Max-Frame Trailer Hitch Receiver # 75599 FitI was able to find that you purchased the Draw-Tite Max-Frame Trailer Hitch Receiver # 75599 for your 2004 Acura MDX. That hitch receiver will fit the following; 2001 - 2006 Acura MDX and 2003 - 2008 Honda Pilot. Keep in mind that trailer hitch receiver hardware is meant to only be torqued down to specs once. If you need replacement hardware you will just use part # RHK, select the manufacturer, and then insert your part number in the blank.
view full answer... - Above Ground Height of Curt Class III 13328 Trailer Receiver Hitch on 2004 Acura MDXI don't have that exact measurement handy, but I was able to figure it out for you. The drop measurement (distance from the underside of the frame member to the top of the receiver tube) is right at 3 inches. This measurement on the Draw-Tite # 75599 is just a little bit less at 2-1/2 inches. This means that the inside top of the Curt # 13328 would sit at about 16-1/2 inches above the ground, versus 17 inches for the Draw-Tite. I've linked you to the install instructions for each hitch.
view full answer...
- What are the Size of the Bolts that Come with the Draw-Tite Receiver 75599 for a 2008 Honda PilotThe six bolts that come with the Draw-Tite Max-Frame Trailer Hitch Receiver # 75599, which is a confirmed fit for your 2008 Honda Pilot, are M12 x 1.25 x 35mm CL8.8. You will also need six 1/2" Conical Washers. You can purchase the replacement hardware from our site using part # RHK. All you will need to do is simply click on the part number and then select the hitch manufacturer (Draw-Tite) and then input the hitch part number (# 75599). We will ship you all of the hardware that is necessary...
view full answer... - Trailer Hitch for 2008 Honda Pilot that Allows Full Size SpareThe Draw Tite hitch # 75599 is a confirmed fit for her 2008 Honda Pilot and will fit with a full sized. In our install videos we've only had the chance to install this on a vehicle with a smaller spare, but it will fit with the full sized spare. For trailer wiring you'd then want the part # 118336. Having the 4-way run out of the back hatch is actually the preferred method although it seems like it wouldn't be. Having the 4-way stored inside the cab keeps it protected from rain and moisture...
view full answer... - What Size Hardware Do Trailer Hitches for 2006 Honda Pilot UseThe size of the bolts that are used to install hitches on your 2006 Honda Pilot like the Draw Tite # 75599 are M12x1.25 95 mm. We also offer replacement hardware kits for our hitches with the part # RHK.
view full answer... - Will Pro Series Trailer Hitch Mount Cargo Carrier 63153 Fit a 2003 Honda PilotYou will need to take 1 important measurement to determine if the Pro Series cargo carrier, # 63153, will fit your 2003 Honda Pilot. You will need to measure from the center of the hitch pin hole on your trailer hitch straight back to the distance needed to clear the rear bumper of the vehicle. If this measurement is less than 12-3/4 inches the Pro Series carrier will fit. You will also need to have a 2 inch trailer hitch for the shank on this carrier. I have included a link to a video...
view full answer... - What is Difference Between Curt and Draw Tite Trailer Hitch for 2005 Honda PilotCurt and Draw Tite are two different companies who make aftermarket hitches for vehicles like your 2005 Honda Pilot. Typically their hitches are somewhat similar but will have a few differences. For your vehicle the Curt part # 13328 installs a bit differently and costs a little bit less than the Draw Tite # 75599. It's also made in the USA too. The Curt states that some fascia trimming may be required to install the hitch wherease the Draw Tite does not have have that listed. For most...
view full answer... - Trailer Hitch Compatibility for Honda Pilot and Acura MDXAftermarket trailer hitch fits for the 2005 Acura MDX and the 2005 Honda Pilot are indeed the same. Either vehicle can be fitted with three different Class III hitches, part # 75599 from Draw-Tite, part # 13328 from Curt and part 87454 from Hidden Hitch. No drilling is required for installing any hitch on either vehicle. Since we do not sell the OEM hitch that was installed on the MDX I cannot guarantee that it will fit the Pilot but odds are pretty good that it will. Some vehicles' OEM...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Written by:
Lindsey S
Test Fit:
Nicholas E
Updated by:
Laura H
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Cw
3/27/2015
No complaints one year after install, very pleased with this product. Ive since ordered trailer tires and wheels from etrailer.com, great company to buy from, quick delivery too.