Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 13333
Retail:$347.95
Our Price: $103.66
You Save: $244.29
Confirmed to Fit
2008 Dodge Ram Pickup
1500 - without factory hitch
2500 and 3500 - without factory hitch
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (817)
- Q & A (0)
- Photos
2008 Dodge Ram Pickup - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- 2 Inch Hitch
- Class III
- 6000
- No Cross Tube
- CURT
- 600
- 10000 lbs WD GTW
- 1000 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Dodge Ram Pickup's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 6,000 lbs
- Maximum GTW when used with weight distribution: 10,000 lbs
- Maximum tongue weight: 600 lbs
- Maximum TW when used with weight distribution: 1,000 lbs
- Maximum gross trailer weight: 6,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13333 Curt Class 3 Trailer Hitch Receiver
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
6,000 lbs.
Tongue Weight (TW):
600 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Gross Towing Weight (GTW):
6,000 lbs.
Tongue Weight (TW):
600 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Tech Tip
No drilling required for installation
Complete Towing Package for 2008 Dodge Ram Pickup
Retail:$510.65
Package Price:$232.15
2008 Dodge Ram Pickup Owners Who Purchased This Trailer Hitch Also Bought...
Popular Ram Pickup Trailer Hitch Accessories
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Defective
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13333
Average Customer Rating: 4.9 out of 5 stars (817 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Chris05/05/2024
2023 Ram 1500 Classic
Went on easy torqued everything down as specified looks great only problem is the hex bolt sticks up to far to put the bumper ball hole cover back on
by: Michael D05/01/2018
2015 DodgeRam Pickup
I ordered this for a 2003 Dodge Ram 1500 I recently acquired. Very well made! It came complete with all hardware and instructions. I had no problem following the instructions. It took longer to get ready to install the hitch than it did to install it; just about 15 minutes. I also ordered wiring kit C57186 which was perfect for my application. I'll be towing a Jay Feather hybrid with Tekonsha Prodigy RF wireless brake controller and this worked out perfectly. Thanks to Etrailer for making this so easy!
by: Steven 05/01/2024
2016 Ram 1500
Product works great. Install medium difficulty for novice. Install video made it doable.
by: Frank M. III10/13/2016
2015 DodgeRam Pickup
Went on without a "hitch"!
But seriously, the hitch went on without a problem. The first one I ordered was welded completely crooked. I was p*ssed! I took pictures and sent them off to customer service. There is no doubt about etrailer's Customer Service Team. They are second to none. My replacement hitch was on its way to me before I even had the crooked one in the mail. The hitch, bolts, nuts and those wires that allow you to pull the bolts and retainer plates through the frame, all quality parts and easily went on. They have instructions and a great video of how to install it on my 2015 Ram 1500. Thank You etrailer for a smooth and pleasant transaction.
by: Wayne 06/07/2024
2015 Ram 1500
Very good product and easy installation !!!
by: Phil 05/03/2024
2022 Ram 1500 Classic
Installation went smoothly. Should work for what we bought it for.
by: Clifford05/03/2024
Love it... Very well made and it did not take long to install as I had the tools needed... the fish wire was so easy... Again, Loved it!!! installed so Quick!!!
by: Randy 03/18/2024
2018 Ram 1500
Built sturdy, looks great. Watched installation video, installed in about 30 minutes. Helps to have 2 people.
by: Anonymous 10/30/2023
Good fit on the truck and wasn’t hard to install, it comes with everything you need to install as well. The paint is holding up really good no chipping or rusting, definitely would recommend this hitch receiver if it fits for your application.
by: Christopher07/09/2023
2005 DodgeRam Pickup
2005 Dodge 1500 V6. 17ft flat trailer. 10ft Dump trailer. I haul no more then 5,000 to 6,000 pounds.
So far the trailer hitch and the receiver has held up well for hauling my two trailers. It installed rather easily with the fishing wire being the only challenge. The only issues is getting the 3/4" hardware to XXX lb-ft. I broke one socket and I don't have a torque wrench that goes that high. Nor could I find a local truck mechanic who did. SO I tightened the hell out of it and hope for the best.
by: Mitch V.09/22/2015
2015 DodgeRam Pickup
Fast shipping. Very well built and easy to install. Had the new hitch on in less than 15 minutes on my Dodge Ram 1500 ST and it looks great.
Mitch V.
9/21/2016
After a year and towing a boat this hitch is still like new. Not a single problem with it coming loose or showing any sign of wear. Am as happy today as I was the day I installed it.
by: Jon. A.. 03/06/2014
2013 DodgeRam Pickup
Awesome. . Perfect fit for my 2013 Ram..Easy to install , especially with all the hardware that's included. I had read previous reviews and noticed a 1/2 inch hex key was needed so I purchased that before the hitch arrived that way I was ready to install. From the time I opened box , dropped spare tire,install and tighten the hitch to jacking back up the spare and being tow ready in 30 min. Thanks etrailer for a great product at a great price.. I am a satisfied customer.
by: Jeff F.06/24/2013
2012 Jeep Liberty
I received a quote from a local truck dealer to install this for $220 and stated it would take a "couple of hours!"
I watched the video on-line and decided to order the part. It arrived in a couple of days and I had it installed in 22 mintues! (4 - 6 mins were to lower/raise the spare tire!)
I used the hitch this past weekend to haul my bass boat!
Ordering a reciever hitch for my wife's Jeep Liberty now (Local dealer quote was $550)
NOTE: Make sure you have a 1/2" hex socket for the bumper bolt.
by: Steven T. 07/23/2015
2015 Ram 1500
Shipped fast. Etrailer support was excellent, there was a concern with my order and it didn't ship on time so they refunded my extra payment for 2 day shipping and still shipped it 2 day. Installation was easy, I didn't even drop the spare all the way to get to the bolt holes through the rear cross bar. Fitment with the spare and in hitch in place is tight. The top bolt barely handled the required torque. Installation was a breeze. Can't wait to use it this weekend.
by: Norman12/03/2019
This product is amazing. Extremely well made and comes with everything you need for an easy installation. The video instructions on there web site are spot on and very simple to follow. I could not be happier with this product. Lowering the spare was the most difficult part of the install but that is Dodges fault for making their spare tire system a joke.
I give this product my highest recommendation!
The entire ordering process could not have been easy and faster. Arrived exactly as advertised I was shocked as to how well made it really is. This is a beast of a hitch. This hitch is far superior to the Mopar hitch the dealer will charge you $275.00 for or $338.00 installed. You won’t be disappointed with this hitch.
by: Thomas 02/02/2024
2004 DodgeRam Pickup
This hitch is high quality and built to last. I think start to finish it took me 20 minutes to install. I am glad I found this and got it so quickly!
by: Granny L03/30/2017
After reading up on your hitch and it's installation, I was convinced I could do this myself ~ except for not being able to tighten things adequately. [I'm all of 71 yrs young.] Owner of the truck, hubs, Papa Gene at 86 yrs young, has no business groveling on the hard ground on his bad back to do the job ! As he figured [incorrectly] that the spare would have to come off from the undercarriage, he elected to have a more able, [disabled] neighbor do the job. As your instructions indicated, the job took all of 30 minutes, and no, the spare stayed in place. Hubs is ready now, to haul cedar logs to be milled for return so that he may build more furniture!
by: Joseph Newcomb02/12/2018
2015 DodgeRam Pickup
Installed on my 2015 Dodge Ram 1500. I think I spent more time trying to find the 1/2 hex and lowering the spare to give me some room than I did installing the receiver. Ordered on a Sunday, received on Tuesday. Fantastic product, good price, easy installation, I would highly recommend.
by: Adam05/04/2020
Heavy duty and sturdy. Installed this on my 2019 Ram 1500 Classic Warlock edition.
Came with all the special wires to install the back up mounting plates! So easy to install that it took me about 20 minutes!
by: John W06/04/2020
2019 RAM 1500 Classic
Very fast service, I had my hitch in just 3 days.
Very easy install, took 15 minutes after dropping the spare tire even with hand tools and laying under it in the driveway.
Looks just as good as OEM, if not better.
by: John 12/23/2022
Great customer service. Fast order processing even during holiday mayhem!
John
12/24/2023
The hitch receiver is working well. No problems. Was a good purchase.
by: Roy S06/23/2018
2016 Ram 1500
Etrailer did a awesome job helping me get the right hitch for my truck and getting it to me in a really quick amount of time even after a ordering issue. Would definitely use Etrailer again if I need another hitch.
by: Gregory03/24/2018
2018 DodgeRam Pickup
Bought this at a great price for my 18 Ram from etrailer. So simple to install. It took longer to lower my spare tire than to install this hitch.
Highly recommend.
by: heatmandan,memphis10/18/2016
2011 DodgeRam Pickup
Was looking for a receiver to fit my 2011 Ram crew cab, E-Trailer had one for a decent price, with a flush under bumper model. Just as advertised, it fit perfect. Very easy to install.(15-20 mins.) Made a great choice in doing business with E-trailer. Delivery was sooner than expected, and the price was good for me. Thanks E-Trailer
by: Angel11/24/2016
2003 DodgeRam Pickup
It was the best and easiest solution for my need, pulled my horse trailer around like nothing and you do not need to be a handle man or mechanic to do this, very easy steps.
25
817
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Does Curt Hitch part # 13333 Fit 2017 Ram 1500 without Factory HitchYes, the Curt hitch part # 13333 is a fit for your 2017 Ram 1500 that does not have a factory hitch. I attached an install video that shows the hitch being installed in a similar 2016 Ram 1500 as yours as well.
view full answer... - Replacement Hardware Kit for Curt 13333 HitchYes. You'll need the Replacement Hardware Kit # RHK; when you navigate to that product page you'll put the # 13333 part number in the field marked "Hitch Item Number" and you will get the specific hardware kit for that hitch.
view full answer... - Recommendation for a Trailer Hitch that Bolts to Bumper Support on a 2009 Dodge Ram 1500You are correct, your 2009 Dodge Ram 1500 does have a bumper support at the back that attaches to each frame rail with a support in the center that rests under the step bumper so you can place a hitch ball. The Curt Trailer Hitch, # 13333, that you have referenced attaches to the bumper support and uses the ball hole as an attachment point also, so it is compatible with your truck. The hitch can be used with weight distribution. I have included a link to the installation details for the...
view full answer... - Trailer Hitch, Ball Mount, Ball, and Trailer Wiring Recommendations for a 2008 Dodge Ram V6For your 2008 Dodge Ram, the Curt Trailer Hitch, # 13333, that you have referenced would be a good choice. This hitch mounts to the bumper support beam and the bumper. It has a gross trailer weight capacity of 6,000 pounds and a tongue weight capacity of 600 pounds. I have included a link to the installation instructions for reference. To complete your towing set up, the recommended ball mount is # 2753 with pin and clip # PC3. You can use ball # 19260 (1-7/8 inch diameter), # 19247 (2...
view full answer... - Trouble Reinstalling Bumper Cap After Installing Curt Trailer Hitch 13333 on a Dodge RamIt seems like some owners can put the cap back on and others cannot after installing Curt trailer hitch # 13333. It is possible that on your truck, and others affected, the hitch is pulled up tighter to the bumper causing the cap not to fit back on. What you can try is to run the bolt in and out a few times to see if it can seat lower in its spot. You can also try changing the order when tightening the bolts because that can affect the position of the hitch. If you have never removed...
view full answer... - How Does Curt Trailer Hitch # 13333 Attach to a 2003 Dodge Ram 1500 Quad CabThe Curt Trailer Hitch, # 13333, for your 2003 Dodge Ram 1500, bolts to the bumper support arm behind the bumper. It requires the removal of the trailer ball hole cap in the center of the bumper. I have included a link to the installation instructions for this hitch that shows pictures and explains the installation steps in detail. Since the bumper and support arm are attached to the frame, the capacity could very well be 500/5,000. The Curt Trailer Hitch attaches in much the same way...
view full answer... - How is the Factory Trailer Hitch Secured on a 2013 Ram 1500 I do not believe the information you were given is correct. On your 2013 Ram 1500, there is a center hole in the rear bumper that can be used for a hitch ball if you do not have the factory trailer hitch receiver installed. If you do have a factory trailer hitch receiver installed then this hole is used for a 3/4" bolt to secure the trailer hitch, not a hitch ball (see photo). If you do not already have a factory trailer hitch and would like to install a similar one, I recommend the Curt...
view full answer...
- How to Tell if Curt Hitch Receiver Will Install on a 2023 Ram 1500 ClassicHey Sal, thanks for reaching out! The Curt Trailer Hitch Receiver # 13333 will only fit if your 2023 Ram 1500 Classic doesn't have a trailer hitch receiver already installed. Since you said yours comes with the factory bumper hitch this won't be compatible unless you're able to remove that hitch. I'm attaching a video installation of this on a 2019 Ram 1500 Classic that you can use to compare what you have to what this truck was installed with when we installed the Curt hitch on it.
view full answer... - Hitch Options for 2019 Ram 1500 ClassicFor the 2019 Ram Classic we have the larger frame mounted hitches like the Curt # C15572 which have higher towing capacities and we also have the bumper beam mounted hitches like the # 13333 which install easier and are priced lower.
view full answer... - Recommended Trailer Hitch and Weight Distribution System for 2004 Dodge Ram 1500The Curt Trailer Hitch Receiver # 13333 referenced in your question is confirmed to fit your 2004 Dodge Ram 1500 as long as you replace what you have with the standard OEM bumper. The Curt hitch is going to attach to the truck's factory bumper support that you mentioned with the included hardware. I have attached an image from the instructions so you can get a clearer picture of this. This hitch does feature a base towing capacity of 6,000 pounds but this is increased to 10,000 pounds...
view full answer...
- Hardware Included With Replacement Hardware Kit for Curt Class III 13333 Trailer Hitch ReceiverThe photo on the RHK product page is a typical photo, and doesn't represent the actual replacement hardware you'll receive for the Curt # 13333. There are hundreds upon hundreds of unique hitch fits, and it wouldn't be practical to get photos of each and every hardware kit for them. When you order a RHK for a given hitch, it'll consist of all the hardware that would have been included with the original hitch. If you look at the photo, you can see the exact hardware provided with the replacement...
view full answer...
- Towing and Tongue Weight Capacity on the Curt Hitch # 13333 that Fits a 2010 Ram PickupAs for towing capacity, the hitch will work fine. However, the tongue weight you provided will be an issue with this hitch. Tongue weight is usually 10 - 15 percent of the trailer weight, in your trailer's case, between 495 - 750 lbs. If your total tongue weight, a loaded ready to tow trailer and any weight behind the rear axle of you tow vehicle, is over 600 lbs, then this could cause failure of the hitch. Because you are already really close to the tongue weight limit, I recommend...
view full answer... - How Far Out Will the Extendable Hitch Mounted Step Part # 288-08400 Stick Out on a 2016 Ram 1500The Extendable Hitch Mounted Step part # 288-08400 that you referenced is adjustable which means the distance from the center of the hitch pin hole on the shank to the outer edge of the step can be adjusted to anywhere from 17-7/8" to 24-7/8". If you then measured from the center of the hitch pin holes to the outer end of the bumper on your 2016 Ram 1500 you would then be able to determine how far it would stick out from the bumper. When we installed the Curt Trailer Hitch Receiver part...
view full answer...
- Class V Trailer Hitch Recommendation for a 2013 Ram 1500The hitches we carry for the 2013 Ram 1500 are not also fits for a 2010 Ram 2500/3500. So for your 2013 Ram you would want the Draw Tite Hitch part # 41948 as it is a Class V hitch confirmed to fit.
view full answer... - Correct Curt Trailer Hitch for 2003 Dodge Ram 1500I spoke with my contact at Curt regarding the issue you had installing the Curt Trailer Hitch # 13333 on your 2003 Dodge Ram 1500. He said what you are describing sounds like your particular Ram was built before 11-1-2002. The issue is that the 2003 model Ram was kind of a split year, so if the truck was actually built before 11-1 then the correct hitch is the Curt # 13326. The Curt # 13333 that you tried to install is for models built after 11-1-2002. To further verify this you can take...
view full answer... - Will Curt Trailer Hitch 13333 Fit a 2018 Ram 1500?Yes it will! I can confirm for you that the Curt Trailer Hitch # 13333 WILL fit a 2018 Ram 1500 so long as your truck does not have a factory hitch. I have also added a photo for you showing how this hitch looks when installed on an '18 Ram. It's easy to see how this might be confusing but technically there is no such thing as a 2018 Dodge Ram; in 2010 Ram trucks became its own brand, separate from Dodge.
view full answer...
- Curt Trailer Hitch Receiver For A 2021 Ram 1500 Classic Warlock Edition No, according to Curt's fitment chart the Curt Trailer Hitch Receiver # 13333 would be the correct fit for your 2021 Ram 1500 Classic Warlock instead of the # C13419 that you referenced. I've attached a short video below where Rob will walk you through the installation process.
view full answer... - 2005 Dodge Ram Trailer Wiring RecommendationSince your 2005 Dodge Ram does not have trailer wiring currently you'd need to start with a 4-way like the part # C55504 since your truck does not have factory wiring at all. If the 4-way is all you need then you'd be set as-is. If you need to move on to a 7-way you'll need additional components as well. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7...
view full answer... - Is Curt Hitch # 13333 Rated for Weight DistributionThe Curt hitch part # 13333 is rated for use with weight distribution systems. This hitch has a capacity of 6,000 lb trailer weight without a WD system and then with a WD system is rated for up to 10,000 lbs. Either way it would have capacity for a 5,900 lb trailer. The bumper towing capacity of your truck is related to if you were to use the ball hole of the bumper to tow from. That said, you should look up the towing capacity of your truck in your owners manual and be sure not to exceed...
view full answer... - Recommended Trailer Hitch Receiver for 2011 Dodge Ram 1500 Big Horn with Factory BumperWe have exactly the trailer hitch receiver you are looking for on your 2011 Ram Big Horn that already has the factory hitch opening through the bumper. I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13333 which installs in that location. I've attached a video to assist.
view full answer... - What is the Mounting Hole Spacing on Curt Trailer Hitch C13333I went out to the warehouse to measure the hole spacing on Curt trailer hitch # 13333 for you. The holes are spaced 7-3/4 inches apart on center. This is a custom fit hitch designed for the following vehicles: 2004 - 2014 Dodge Ram Pickup 1500 Series, without factory hitch 2003 - 2003 Dodge Ram Pickup 1500 Series, without factory hitch - built After 11/1/02 2003 - 2013 Dodge Ram Pickup 2500 and 3500 Series, without factory hitch 2010 - 2013 Ram 3500 Pickup, without factory hitch 2010 -...
view full answer...
- Best Trailer Hitch for a 2008 Dodge Ram 1500 SLT 4x4 to Tow a 4,500 Pound TrailerCurt trailer hitch # 14361 would certainly do the trick and it does fit your 2008 Dodge Ram 1500 SLT 4x4. But this hitch might be a bit of an overkill since its capacity is 10,000 pound gross trailer weight. It is a great option if you will be towing a heavier trailer in the future. But if you do not anticipate towing any more than the 4,500 pound trailer then I recommend hitch # 13333 which is rated for 6,000 pound gross trailer weight and 600 pounds tongue weight. When used with weight...
view full answer... - Will Top Bolt of Curt Hitch 13333 Rust When Installed on 2018 Dodge RamI certainly can understand your concern for the the top bolt of the Curt hitch part # 13333 being exposed to weather and causing rust potentially. But due to how many of these we have sold and us not getting any feedback that the bolt ended up getting rusted I would agree with Curt and say it's totally fine.
view full answer... - Ball Mount Compatible with Curt # 13333 Hitch on 2011 Dodge RamWe do not currently offer a package deal that includes the hitch, ball mount and ball, but we do offer a ball mount and ball kit, part # EBMK4. The kit includes a ball mount, and a Convert-A-Ball interchangeable ball system with a 1-7/8 and a 2 inch trailer ball, pin and clip and storage bag. When this kit is combined with the Curt # 13333 hitch you referenced, you'll be set with an economical towing system.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Randy B
Test Fit:
Jared G
Test Fit:
Brent H
Test Fit:
Robert C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Patrick B
Video Edited:
Andrew L
Video Edited:
Chris R
Written by:
Lindsey S
Video by:
Kathleen M
Video by:
Zach D
Video by:
Jonathan Y
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Frank I.
10/14/2017
Ive used it quite a few times. I towed one of my cars to have a new transmission installed, a rented mini excavator twice during the 2017 summer. It is definitely doing its job pulling its weight.