Trailer Hitch for 2019 Ram 1500

Question

Question:

Will Part 13333 work for a 2019 Ram 1500 w/ Class III Hitch set up? Thank you,

asked by: Jeff

0

Expert Reply:

If you have the 2019 Ram 1500 the only trailer hitch available that is confirmed to fit is the Curt Class IV & V Ultra Frame Receiver Hitch # C15005. If your truck is equipped with the factory hitch though it will need to be removed for this trailer hitch to install correctly. This is a heavy-duty hitch that features a 15,000 pound towing weight capacity and will provide you with a 2 inch receiver.

The Curt Class III Hitch Receiver # 13333 referenced in your question will only fit the 2019 Ram 1500 Classic model. Even then it will not fit if the 1500 Classic has the factory hitch because the factory unit cannot be removed without negatively affecting the frame.

I have attached the written installation instructions for the Curt hitch that you can take a look at as well.

expert reply by: Chris R

0

Answer 1

For the 2019 Ram Classic we have the larger frame mounted hitches like the Curt #C15572 which have higher towing capacities and we also have the bumper beam mounted hitches like the #13333 which install easier and are priced lower.

view full answer...

Answer 2

The Draw-Tite Max-Frame Trailer Hitch Receiver part #75662 is only a fit for the 2019 Ram 1500 Classic without a factory trailer hitch which is the old body style (fourth generation). The photo you attached shows a factory trailer hitch on what I…

view full answer...

Answer 3

The etrailer.com Trailer Hitch Receiver #E98852 is only a fit for 2019 Ram 1500 Classics that do not have a factory hitch. If you do not have a 1500 Classic and instead have the new style of 2019 Ram 1500 then the trailer hitch that will fit is the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hi Jeremy; that's a good question and you'll actually need to go ahead and re-do the set up of your weight distribution system after adding the Timbren Rear Suspension Enhancement System #TDR1500DS to your 2019 Ram 1500. So it wouldn't…

view full answer...

Answer 9

There is an extremely simple trailer hitch installation for your 2020 Ram 1500, the Curt Trailer Hitch #C13419 which you can reasonably expect to install in less than 15 minutes. All you really have to do is remove the plug from the bumper step, put…

view full answer...

Answer 10

For your 2019 Ram 1500 the Curt TriFlex NEXT Trailer Brake Controller item #C24VV can be installed with a plug and play adapter using the Curt Custom Wiring Adapter item #C51458. The port you need is right above where your right foot would be covered…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Yes, they will. The B&W Custom Installation Kit w/ Base Rails item #BWRVK2604 are confirmed to fit the 2023 Ram 1500's without a diesel engine. These fit both the 5-1/2' and 6-1/2' bed lengths. These custom fit brackets mount in…

view full answer...