Coupler Pin - 5/16" Diameter x 2-1/2" Long
(0 reviews)
Price: $5.34
In Stock
Coupler Pin - 5/16" Diameter x 2-1/2" Long
Item # 37201054
Retail:$16.97
Our Price: $5.34
You Save: 69%
In Stock
Need help with installation?
Locate installers near me- All Info
- Q & A (0)
- Videos (1)
- Photos
JR Products Hitch Pins and Clips - 37201054
- Snapper Pin
- 5/16 Inch Diameter
- JR Products
- 2-1/2 Inch Span
- 2-1/2 Inch Long
Spring-tensioned, zinc-plated steel snapper pin prevents your trailer's coupler from unlatching and releasing from your hitch ball. Pin measures 5/16" diameter x 2-1/2" usable length.
Features:
- Snapper pin prevents your trailer's coupler from unlatching
- Spring-tensioned design creates a strong hold
- Zinc-plated steel is corrosion resistant
Specs:
- Pin diameter: 5/16"
- Usable length: 2-1/2"
01054 JR Products Large Coupler Lock Pin 5/16" Diameter x 2-1/2" Usable Length
Video of Coupler Pin - 5/16" Diameter x 2-1/2" Long
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of JR Products Hitch Pins and Clips - Snapper Pin - 37201054
Hey everyone. I'm Ellen here at etrailer.com and today we're taking a quick look at the coupler pin. This has a diameter of five 16ths of an inch, so it should work for those coupler latches that have a five 16th inch opening. This is going to keep that trailer latch secure or your coupler latch secure so you don't have to worry about it coming undone while you're out on the road. As far as the pin length, it's about two and seven eighths inches long, but for our usable length or where it meets that keeper, it's just shy of two and a half inches. If you stretch that keeper out a little bit, we'll give you a little bit more room there.
There's some flex in that keeper spring. The total space between our pin and the keeper is about one and three quarter inches. Overall length about three, about three and an eighth inch, and then about two and a quarter. The steel construction does have a zinc plating, so it should resist any kind of corrosion and that's pretty much all there is to it for our coupler pin. If you need a different configuration, we do have a lot of options available here at etrailer.com, so definitely check them out.
Thanks for watching.
0
0
See what our Experts say about this JR Products Hitch Pins and Clips
Info for this part was:
Edited by:
Lindsey S
Installed by:
Kathleen M
Written by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.