bing tracking image
  1. Trailer Hitch
  2. Dodge
  3. 2014
  4. CURT
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 13364
Retail:$276.93
Our Price: $196.75
You Save: $80.18
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
Trailer Hitch 13364 - Concealed Cross Tube - CURT
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Call etrailer.com at 1-800-940-8924 for expert service. We are your Dodge trailer hitch experts, and offer a great price. etrailer.com carries a complete line of CURT products for your Dodge Grand Caravan 2014. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part 13364 from CURT can be ordered online at etrailer.com. Complete trailer hitch installation instructions and technical support.
  • All Info
  • Reviews (802)
  • Q & A (0)
  • Photos

2014 Dodge Grand Caravan - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

  • 2 Inch Hitch
  • Class III
  • 4000
  • Concealed Cross Tube
  • CURT
  • 400
  • 5000 lbs WD GTW
  • 500 lbs WD TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your Dodge 's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your Dodge
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Uses existing hardware from your Dodge
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,000 lbs
      • Maximum GTW when used with weight distribution: 5,000 lbs
    • Maximum tongue weight: 400 lbs
      • Maximum TW when used with weight distribution: 500 lbs
  • Limited lifetime warranty



Curt 13364 Installation Diagram

Tech Tip: Some minor fascia trimming may be required around the receiver on 2014 Chrysler Town & Country and 2008-2014 Dodge Caravan and Grand Caravan applications.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13364 Curt Class 3 Trailer Hitch Receiver

Installation Details 13364 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
4,000 lbs.

Tongue Weight (TW):
400 lbs.


Weight Distribution Capacity
Gross Towing Weight (GTW):
5,000 lbs.

Tongue Weight (TW):
500 lbs.



No drilling required Manufacturer Estimated Installation Time

Tech Tip

No drilling required for installation , Exhaust must be temporarily lowered for installation , Trimming of the fascia may be required for hitch installation. Check fit first, per instructions, to see if necessary , We recommend that all non-trailer loads (bike racks, cargo carriers, etc) should be supported by stabilizing straps, such as 18050, sold separately





Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13364

Average Customer Rating:  4.8 out of 5 stars   (802 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

Fit great, Install was pretty quick, mounting hardware is already on the van from the factory, when you pull the big bolts out, the plate in the frame is spring loaded and will disappear.
Put the smaller bolts by the bumper in first and snug them but don't tighten them to pull the plate down to get the big bolts threaded in, then tighten them all down.
I didn't trim my bumper like it suggested and it looks fine!



by:

Product arrived as promised. I waited a few days to gather tools I needed (namely metric impact sockets) and warmer weather. Installed the hitch last evening. It took about an hour. Most of this time was jacking up, placing jack stands and removing THREE exhaust hanger bolts. I had to remove one about midway before the exhaust would lower enough for me to get to the chassis bolts on the passenger side. Your install video shows a hitch with three passenger side bolts but the actual hitch only has two. Apparently a later version which is exactly what I needed. Actual placement and bolting of hitch and bolting back the exhaust hangers only took about 15 minutes. I am extremely pleased with the neatness and appearance. You see nothing but the receiver box. No ugly cross bars like some hitches show. Thanks for a great product.

Dennis W.

1/23/2016

It is perfect.DW



by:
2016 Dodge Grand Caravan

first id like to say thank you to the people of etrailer.com for shipping out my hitch in more than a timely manner. we got the curt 2" hitch for our 2016 dodge caravan. we are using it for a bike rack only and this seems to do the job just fine. I installed it by myself in about 30 minutes. the instructions were pretty simple and easy to follow. if you are looking to get a hitch for your mini van id definitely recommend using etrailer.com.

Jason B.

3/28/2020

After a year of ownership I couldnt be happier.



by:

When I received the hitch one end was bent. I called to ask about it and was told that sometimes this happens and it will need to be bent back . I did that myself using a tower jack and a 4x4. The instructions from the install video were very good and helped. The same is true for the wire harness in that the video helped. The hitch is strong and working well after one year.



by:
2015 Chrysler Town and Country

Fit perfectly on my Town & Country mini-van. It is mounted up under the rear of the vehicle so it is not seen from the rear. Only visible part is the 2X2 receiver box. The instructions could have shown the two bolt sizes and locations. This would help in getting ready to install.

Chiefhart

12/9/2017

Works as designed and installed. great hitch!



by:

Hello,

I heard of etrailer through
a friend and decided to give it a go. I have not ordered anything from etrailer before, and this being my first time, I thought i would provide some feedback.

Your website was helpful and easy to navigate. For this particular order I decided to call and speak with someone to talk about the 3 options I had for my mini-van, he was very helpful.

I placed the order over the phone and paid extra to have it shipped within a couple days. The order was placed Thursday morning and with an estimated arrive date and time of Saturday, July 17th by 7:PM. I kept with the online tracking though the weekend and into Monday. Finally the UPS tracking updated the website and said it would be delivered Tuesday 20th.

When I received the package, the box was in somewhat rough shape. I figured that it's a metal hitch and that it rough delivery, so I unboxed the hitch to get ready for install. While under the mini-van, my buddy and I lifted the hitch up in place and discovered that the holes are not lining up. We set the hitch down for a closer look and realized that the one side of the hitch is bent. I'm leaving for a trip and needed to have this hitch on before I go, So what we ended up doing was to slowly bend hitch back soa that it lined up with mounting hole.

This was the first time I ever installed a hitch, it was real easy to install and I happy with the finish product. I hoping that there is no long term damage to the hitch from when it was bent in the shipping process and then gently bending it back.

I gave an average rating because etrailer was helpful, but the product delivery could have been more timely and in better condition.



by:

Instructions were great. It took two people, but one younger person could have done it. Towed trailer from Florida to PA with it. No problems.I did recommend to others.



by:

Bought Curt Trailer Hitch for my 2019 Grand Caravan.
It fitted as instructed in YouTube video sent in email.

Installed 3 bike hitch carrier on it and drove around with 2 bikes on it.

I will revisit again after 6 months to mention how the Trailer Hitch is holding up.
So far it’s awesome

Jayesh

7/22/2021

Still holding on and being used weekly. I use mainly for my bike rack. No issues so far and it’s reliable also.



by:
2014 Chrysler Town and Country

Works like a champ. I love how its kinda hidden by the bumper so it doesn't stick out! Only took about 15 mins to install and that was by myself. Just backed the van up some car ramps and had plenty of clearance to install. It takes longer to loosen the muffler than it does to install! Just follow the instructions and the videos and you'll be fine installing this by yourself.



by:

I purchased the wiring and hitch for my Dodge caravan to tow my boat, however I was able to buy a Toyota Highland which will tow my travel trailer and boat trailer. So I sold the Dodge caravan and never installed them. I gave an excellent rating because over the years I’ve purchased various things from e trailer with excellent quality and service. This is a good American company, buy from them,



by:
2014 Dodge Grand Caravan

Easy and simple mounting, this vehicle specific receiver utilized the existing fasteners already attached to my van. The most difficult, time consuming part was unbolting the exhaust and moving aside to mount to the passenger side frame rail. Total time to install was maybe 30-minutes once van was setup and tools laid out.



by:
2016 Chrysler Town and Country

Trailer hitch arrived undamaged and went on in about I hour or less. Fits great and does not show much at all. It will mostly be used for bike rack so it's a little overkill for my needs ,but if I have to tow a trailer it will easily do the job.

John

6/24/2021

hitch working perfectly



by:

Repeat customer,easy installation, looks and works great.



by:

It arrived on time. It took less than an hour to install, by myself. The hitch is beautiful, with great welds, and nice powder coating.
This is a first rate company!



by:

Hitch fits great. Videos made installation easy.
I only wish etrailer.com would protect the receiver with some styrofoam for shipping. Mine was a little scratched up right out of the box, which is a bummer because that is the only part visible once installed on my vehicle!

Etrailer Expert

Sierra K.

6/10/2021

Thank you for your review. Customer Service takes care of all damage done in shipping. This will need to be covered with anti-corrosive spray paint.



by:

This is the second time, i bought stuff from you guys etrailer, excellent job. Thanks



by:

Installed just like the video. My Son, Ben was visiting & he learned about torque wrenches.
Picture of Ben installing hitch

Tom H.

7/15/2019

Perfect



by:
2012 Chrysler Town and Country

I am a sales Rep in the cycling and outdoor industry and carry bikes and trailers regularly. Bike carriers have increasingly moved from the roof to the hitch mount option over the years and so most of my rack sales need a hitch.

The hitch was surprisingly easy to install and i was able to do it within an hour or so without lifts. It was a little tight getting under the vehicle and turning tools was cumbersome. That said, still easy enough.

I have had no problem with access or clearance with the bumper and have been quite pleased with the hitch. My last trip we visited Big Bend State Park and the road to the HQ is 27 miles of dirt road with an INNO bike rack carrying a fat bike on the rack. I had several bikes on the hitch and never had an issue. I'm around 30k for the past year with something hanging off the back of the car, issue free! Thanks!
N



by:

On my vehicle, easy installation

Steve

11/6/2023

Excellent product



by:
2014 Dodge Grand Caravan

This is my second time using Etrailer.com for hitching/towing needs and thusly, this is my second hassle-free, perfect, great experience with them.
I was in a pinch and needed a Curt 13364 hitch for a trip to OK that came up quickly. Every other supplier I could find could not give me any kind of shipping time or schedule. I called Etrailer and spoke to Katie D. who took the time and was very courteous and professional with my request. She was able, on a Friday afternoon, to work with me for a proper solution to have the correct hitch shipped to me in DEEP southwest Texas in time for installation before leaving the following Thursday.
Katie D., once the product shipped, kept me updated via email with a tracking schedule that helped me to ensure I would receive it well in time and in good shape, and it did arrive just fine.
Regarding the installation on my 2014 Grand Caravan, pardon the pun but it was installed without a hitch. Taking about 20 minutes to install it went up perfectly with no drilling or cutting of the vehicle body. Utilizing existing bolts in the vehicle, all the holes lined up perfectly.
I cannot say enough good things about etrailer.com and Katie D., they were instrumental in providing what I needed in a timely manner. I would definitely use them again, and recommend them highly!!!!!



by:

Fits perfect! Followed etrailers youtube video for installation. Used the Curt hitch over the other brands because the receiver tube is longer for better clearance of ball hitch and accessories. See etrailer's hitch camparison video. I'm glad i did because the clearance between the ball and bumper is minimal. I bought an extended and elevated hitch to resolve this issue. Standard free shipping was exceptionally quick!



by:

This is what I installed Review the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13364. Well I got it on. It took more than the 25 min. that was stated, I guess if you have a garage with a lift and all then that time limit would be possible. I did it in my garage with a floor jack, jack stands and a creeper. It took about 2 hours but it is done and it looks great. Everything that was stated in the video was correct except for the time. I did not need to trim the back valance as it just barely touched it.



by:
2010 Dodge Grand Caravan

I picked this Curt hitch over the Draw-Tite hitch because the Curt hitch weighs more which means that it is made with more steel and is a beefier hitch. This Curt hitch bolted up perfectly with all 5 frame bolt holes. I used my floor jack and made a simple wood lifting rig and strapped them together with large cable ties to balance the hitch on the floor jack lifting cup. See my pics. Very happy with this hitch and it installed very nicely! Thanks for the detailed video which really helps!



by:
Hyundai Accent

This isn't the first aftermarket hitch I've purchased and the first thing that struck me was its heft and rugged construction. I thought "...no way was this thing going to fail or degrade in my lifetime."
I read technical manuals daily and the simplicity and detail of the single-sheet instructions were without error. (a rarity these days).
Besides the obvious top quality of product, what I appreciated the most was the quick and courteous service:
1) purchased online; but verified with a phone call that order was received, in stock, and ETA of shipment - the 1st phone call and person who answered had all my questions answered competently (another rarity).
2) the phone operator was intelligent, was without a heavy accent - easy to communicate with.
3) shipment was tracked and status sent to me via email; follow-up email was sent to me inviting me to place a review.
4) This company is WONDERFUL to deal with; wish I needed more hitches!!



by:
2017 Dodge Grand Caravan

Just received my new tow hitch and it is falling out of the box. I know it just a tow hitch but it has a nice powder coat on it and its kind off scratched up which will rust sooner. The product seems really nice and if it fits as shown then it will be perfect. You just need to put some dunnage in the box so it doesnt blow out.

Etrailer Expert

Tyler M.

3/10/2021

Hi Tim, Thanks for your feedback! I would recommend using some rust resistant and corrosion resistant paint to touch up the areas where the powder coating was damaged. Our customer service team will be reaching out to you about this.


25
802
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Trailer Hitch that Fits 2007 Dodge Caravan with Stow N Go Seating
    The Curt hitch # 13389 is the correct fitting hitch for your 2007 Dodge Caravan with stow n go seating. The other two hitches fit different vehicle variations. I attached an install video for this hitch on a 2007 Town and Country similar to yours.
    view full answer...
    Image 1 for
  • Trailer Hitch Receiver Compatible with 2019 Chrysler Pacifica
    The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13364 will not fit a 2019 Chrysler Pacifica. If you are looking for a hitch compatible with a 2019 Chrysler Pacifica, I recommend the Curt Trailer Hitch Receiver # C13383 which has a nice black powder coat finish and is the correct fit for that vehicle. This is a great option for bike racks and other accessories and also is a great option if you will be towing. If you need vehicle wiring, there are many different options...
    view full answer...
  • 7-Way RV Trailer Connector Mount for Curt Trailer Hitch # 13364 on a 2010 Chrysler Town and Country
    To convert your 4-Way trailer connector you will need the Brake Controller 7 & 4 Way Installation Kit, item # ETBC7, which includes everything needed to upgrade your trailer connector to a 7-Way RV connection. We have detailed installation instructions for you to review, see link. The one other thing you will need is a No-Drill Mount Bracket, # C57202 (long) , to attach the connector to the hitch. You will bolt the bracket included in the # ETBC7 wiring kit to this bracket and then attach...
    view full answer...
  • Is Curt Trailer Hitch Receiver Recommended to Carry a Scooter on a 2012 Dodge Caravan
    The trailer hitch receiver I recommend for your 2012 Dodge Grand Caravan is the Draw-Tite # 75579. It's confirmed to fit your van, just like the Curt # 13364 you had referenced. However, the Curt hitch requires you use the support strap # 18050 to be compliant with the hitch's warranty when carrying non-trailer loads like your scooter. The Draw-Tite doesn't require the strap like the Curt hitch does.
    view full answer...
  • Fitment of Hitch for 2016 Dodge Grand Caravan
    We have the part you need but, the Curt # C12362 and # 13389 are the proper part numbers for a 2007 Dodge Grand Caravan and these will not fit a 2016 Dodge Grand Caravan. There was a generational change made between these year models. You need the Curt Trailer Hitch Receiver, # 13364 for a 2016 model year Dodge Grand Caravan.
    view full answer...
  • Which Trailer Hitch Finish Coating is Most Durable for a 2010 Chrysler Town and Country
    Curt produces their hitch, part # 13364 with a baked-on powder coat. Of all the finishes, I think the Curt is the most durable. However, the Curt powder coat finish is very glossy compared to the others. Some people prefer the dull finish because it attracts less attention. If this is a concern of yours, I would go with the Draw-Tite, part # 75579. It will hold almost as well as the Curt without being so glossy. My grandfather-in-law just had the Curt hitch installed on his 2010 Town and...
    view full answer...
  • Is Additional Hardware Needed to Install Curt Trailer Hitch on 2015 Chrysler Town and Country
    You will not need any additional hardware as the existing bolts on your 2015 Chrysler Town and Country will be long enough in order to install the Curt Trailer Hitch Receiver # 13364. I have added a link to a video showing an install of this hitch on a '15 Town and Country for you to check out as well. If you plan on towing you will also need a trailer wiring harness, and the harness that fits your Chrysler is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector...
    view full answer...
  • Does Curt Class III Trailer Hitch Fit Stow and Go Version of 2009 Dodge Grand Caravan
    The Curt Trailer Hitch Receiver, Class III # 13364 is confirmed to fit All Models of the 2009 Dodge Grand Caravan, including the models with Stow 'N Go Seating. The written installation instructions and an installation video of this hitch are linked to this page for you. It is important to note that per Curt's warranty, a stabilization strap # 18050 is required for all non-trailer loads, such as bike racks and cargo carriers, used on the # 13364 trailer hitch. The Draw-Tite Class III...
    view full answer...
  • Weight Distribution for a 2008 Dodge Grand Caravan and 3,400 Pound Pop Up Camper
    Curt trailer hitch # 13364 for your 2008 Dodge Grand Caravan is rated for 5,000 pounds gross trailer weight and 500 pounds tongue weight when using a weight distribution system. You will need to check the owners manual for the van to determine if it can be used with weight distribution and if so what it is rated for. Which ever has the lower rating, the hitch or vehicle, is the rating you need to go by. To choose a weight distribution system you will need to go by the total tongue weight...
    view full answer...
  • Hitch that Fits 2011 Ford Flex and 2013 Volkswagen Routan SE
    The hitch part # 13364 that you referenced does fit the 2013 Volkswagen Routan as long as it's a Canadian market model. For the 2011 Ford Flex you'd then want the part # e52AR if it has Dual exhaust and # e95KR for single exhaust and you'd be set. There isn't a hitch that fits both vehicles.
    view full answer...
  • 7-Way Mounting Bracket Recommendation for a 2011 Chrysler Town and Country with Curt Hitch
    Due to how tight your hitch opening sits to the bumper of your 2011 Chrysler Town and Country I have a solution for you, but the Curt Bracket part # C58000 would not be it. Instead I would recommend the 7-Way Trailer Connector Mounting Box # 18159. This will strap around the cross beam of the hitch and will provide an excellent mounting bracket for your 7-way.
    view full answer...
    Image 1 for
  • Fixing Muffler Rattling Against Curt Class III Hitch # 13364 on 2010 Dodge Grand Caravan
    What you describe is a fairly common occurrence. The spot where the hitch sits on the vehicle does not vary from Grand Caravans of the same model year. However, since the exhaust system uses flexible rubber isolators and muffler hangers that are easily manipulated, the exact location of the exhaust system can vary quite a bit between vehicles of the same year, make and model. We've actually come up with a help article that specifically addresses this issue (see provided link), which provides...
    view full answer...
  • Cleaning out Weld Nuts on 2014 Chrysler Town and Country for Installing Trailer Hitch
    The issue you are experiencing with threading the bolts into the existing holes on your Chrysler's frame is actually not too uncommon. What we recommend doing to clean the weld nuts is to simply use some spray lubricant and a good wire brush like # 814113. You will just want to spray the lubricant (something like WD-40 or Blaster Lubricant) inside the weld nut and then let it sit for a few minutes. Then you can scrub the bolt hole with the wire brush, loosening up any corrosion or grime...
    view full answer...
  • Does Draw Tite Hitch part # 36455 Require Fascia Trimming like Curt Hitch for 2012 Town and Country
    I think the Draw-Tite Hitch part # 36455 would be your better option. There is not fascia trimming required with this hitch being installed on your 2012 Chrysler Town and Country and if you were to carry a bike rack on the hitch you would not be required to use a stabilizer strap like the Curt hitch # 13364 requires. I attached a link to an install video and instructions for you to check out as well.
    view full answer...
  • Will Curt Multipurpose Ball Mount Carry Harmar Electric Scooter Lift
    Yes, the Curt Multipurpose Ball Mount with 2" Receiver # D210 will be able to carry a Harmar electric scooter lift. According to my research these lifts have a maximum installed weight of 102 lbs, and the Curt ball mount's accessory has a tongue weight capacity of 500 lbs, though keep in mind if you are using the receiver but NOT the ball mount portion as well, it reduces your hitches tongue weight capacity by 50 percent. For example, if you had Curt Trailer Hitch # 13364 on your 2017...
    view full answer...
  • Recommended Class III Trailer Hitch For 2010 Chrysler Town and Country
    The recommended Curt Class III for your 2010 Chrysler Town and Country is Curt Trailer Hitch Receiver # 13364. The hitch fits the Town and Country from 2008 to 2016, the Dodge Grand Caravan from 2008 to 2018 as well as the Dodge and Ram CV from 2012 to 2015 and the Volkswagen Routan from 2009 to 2014. On the # 13364, there is no drilling required for installation and the exhaust must be temporarily lowered for installation. Trimming of the fascia may be required for hitch installation....
    view full answer...
  • Recommended Hitch for a 2021 Chrysler Pacifica
    No, it will not. The Curt Hitch item # 13364 fit Town and Country's only during the 2008 - 2016 model years. To add a comparable hitch to a 2021 Chrysler Pacifica you will need the Curt item # C65CR.
    view full answer...
  • Trailer Hitch and Wiring for a 2010 Dodge Grand Caravan
    The designs of trailer hitches from different manufacturers for a given vehicle often look the same. This is because the hitches have to be a certain shape to fit nicely under the vehicle. The most popular hitch for your 2010 Dodge Grand Caravan is Curt hitch # 13364. This is a Class III trailer hitch with a 2 inch receiver. It is rated for 400 pounds tongue weight and 4,000 pounds gross trailer weight. Consult the vehicle owner's manual for the towing capacity of the van. Whichever is...
    view full answer...
  • Is There a Roof Rack for 2013 Chrysler Town and Country with Stow 'N Place Factory Rack
    I checked for fits for 2013 Town and Country vans but could not find anything in regards to these having raised side rails. What I think you are probably referring to is that you have the Stow 'N Place factory roof rack on your vehicle, where the crossbars are stowed lengthwise when they aren't being used. The Rhino-Rack # RRSX100 will not work with this rack, and there are no fits for traditional racks that can be used with this vehicle if it has the factory rack. If you need an additional...
    view full answer...
  • Trailer Hitch Receiver With the Highest Ground Clearance for a 2012 Chrysler Town and Country
    We have actually installed both Curt Trailer Hitch Receivers, parts # C12264 and # 13364, as well as both Draw-Tite Trailer Hitch Receivers, parts # 36455 and # 75579, on similar 2012 Chrysler Town and Countrys. Out of all 4 of those choices the Draw-Tite Class II 1-1/4 inch receiver # 36455 offers the most ground clearance at 13 inches. This receiver has a max Gross Trailer Weight of 3,500 lbs and a max Tongue Weight of 300 lbs. If you need wiring for your Town and Country I recommend...
    view full answer...
  • What Vehicles Does the Curt Hitch part # 13364 Fit
    The Curt Hitch part # 13364 that has been confirmed to fit your 2013 Chrysler Town and Country fits the following vehicles: 2012 - 2014 Dodge CV 2012 - 2015 Ram CV 2008 - 2015 Dodge Grand Caravan All Models 2009 - 2012 Volkswagen Routan All Models 2008 - 2015 Chrysler Town and Country All Models
    view full answer...
  • Torque Specs for the Installation Hardware of the Curt Hitch part # 13364
    The torque specs for the hardware that comes with the Curt Hitch part # 13364 that you referenced are in the installation instructions that I have attached. Since we link the instructions directly from the manufacturer and they are subject to change we avoid posting the torque figures for liability purposes. I also attached an installation video for you to check out as well.
    view full answer...
  • Choosing a Hitch for 2010 Dodge Grand Caravan with Stow-N-Go Seats
    Your 2010 Dodge Grand Caravan with Stow-N-Go Seats can be fitted with either a light-duty 1-1/4-inch Class II hitch or a heavier duty 2-inch Class III type. We offer options in both sizes and all will fit your version of the Grand Caravan with Stow-N-Go seats. The link will let you see all options. I suggest a heavier-duty Class III type hitch because it will give you a greater safety margin and also be more widely compatible with a whole range of accessories like bike racks and cargo...
    view full answer...
  • Will Trailer Hitch from 2010 Dodge Grand Caravan Also Fit 2015 Dodge Grand Caravan
    Thank you for the kind words! There are indeed many hitches that fit both the 2010 and 2015 Dodge Grand Caravans. Both of these models years are part of the same 5th generation of this vehicle. Curt Class III hitch # 13364 will fit both model years as will Draw-Tite # 75579. You may want to check the manufacturer safety sticker on your hitch for the brand and part number. With that information I will be glad to confirm the compatibility of the hitch on your new van. Do please note that...
    view full answer...


< Previous
123. . .6



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane T
Test Fit:
Shane T
Employee Randy B
Test Fit:
Randy B
Employee Jared G
Test Fit:
Jared G
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Conner L
Test Fit:
Conner L
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Victoria B
Expert Research:
Victoria B
Employee Zack K
Video Edited:
Zack K
Employee Andrew K
Video Edited:
Andrew K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Kathleen M
Video Edited:
Kathleen M
Employee Chris R
Video Edited:
Chris R
Employee Lindsey S
Written by:
Lindsey S
Employee Alan C
Video by:
Alan C
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Schuyler H
Video by:
Schuyler H
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924