bing tracking image
  1. Trailer Hitch
  2. Dodge
  3. Grand Caravan
  4. 2015
  5. CURT
FITS 2015 Dodge Grand Caravan
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 13364
Retail:$276.93
Our Price: $188.30
You Save: $88.63
Trailer Hitch
Confirmed to Fit
2015 Dodge Grand Caravan

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
Trailer Hitch 13364 - Concealed Cross Tube - CURT
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
The best technical support and full trailer hitch installation instructions. Great price Grand Caravan trailer hitch and expert service. Dodge Grand Caravan, 2015 trailer hitch by CURT are available from etrailer.com. For expert service call 1-800-940-8924 to order your Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 13364, or order online at etrailer.com.
  • All Info
  • Reviews (801)
  • Q & A (0)
  • Photos

2015 Dodge Grand Caravan - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

  • 2 Inch Hitch
  • Class III
  • 4000
  • Concealed Cross Tube
  • CURT
  • 400
  • 5000 lbs WD GTW
  • 500 lbs WD TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your Dodge Grand Caravan's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Uses existing hardware from your vehicle
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,000 lbs
      • Maximum GTW when used with weight distribution: 5,000 lbs
    • Maximum tongue weight: 400 lbs
      • Maximum TW when used with weight distribution: 500 lbs
  • Limited lifetime warranty



Curt 13364 Installation Diagram

Tech Tip: Some minor fascia trimming may be required around the receiver on 2014 Chrysler Town & Country and 2008-2014 Dodge Caravan and Grand Caravan applications.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13364 Curt Class 3 Trailer Hitch Receiver

Installation Details 13364 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
4,000 lbs.

Tongue Weight (TW):
400 lbs.


Weight Distribution Capacity
Gross Towing Weight (GTW):
5,000 lbs.

Tongue Weight (TW):
500 lbs.



No drilling required Manufacturer Estimated Installation Time

Tech Tip

No drilling required for installation , Exhaust must be temporarily lowered for installation , Trimming of the fascia may be required for hitch installation. Check fit first, per instructions, to see if necessary , We recommend that all non-trailer loads (bike racks, cargo carriers, etc) should be supported by stabilizing straps, such as 18050, sold separately





Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13364

Average Customer Rating:  4.8 out of 5 stars   (801 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

Fit great, Install was pretty quick, mounting hardware is already on the van from the factory, when you pull the big bolts out, the plate in the frame is spring loaded and will disappear.
Put the smaller bolts by the bumper in first and snug them but don't tighten them to pull the plate down to get the big bolts threaded in, then tighten them all down.
I didn't trim my bumper like it suggested and it looks fine!



by:

Product arrived as promised. I waited a few days to gather tools I needed (namely metric impact sockets) and warmer weather. Installed the hitch last evening. It took about an hour. Most of this time was jacking up, placing jack stands and removing THREE exhaust hanger bolts. I had to remove one about midway before the exhaust would lower enough for me to get to the chassis bolts on the passenger side. Your install video shows a hitch with three passenger side bolts but the actual hitch only has two. Apparently a later version which is exactly what I needed. Actual placement and bolting of hitch and bolting back the exhaust hangers only took about 15 minutes. I am extremely pleased with the neatness and appearance. You see nothing but the receiver box. No ugly cross bars like some hitches show. Thanks for a great product.

Dennis W.

1/23/2016

It is perfect.DW



by:
2016 DodgeGrand Caravan

first id like to say thank you to the people of etrailer.com for shipping out my hitch in more than a timely manner. we got the curt 2" hitch for our 2016 dodge caravan. we are using it for a bike rack only and this seems to do the job just fine. I installed it by myself in about 30 minutes. the instructions were pretty simple and easy to follow. if you are looking to get a hitch for your mini van id definitely recommend using etrailer.com.

Jason B.

3/28/2020

After a year of ownership I couldnt be happier.



by:

When I received the hitch one end was bent. I called to ask about it and was told that sometimes this happens and it will need to be bent back . I did that myself using a tower jack and a 4x4. The instructions from the install video were very good and helped. The same is true for the wire harness in that the video helped. The hitch is strong and working well after one year.



by:
2015 Chrysler Town and Country

Fit perfectly on my Town & Country mini-van. It is mounted up under the rear of the vehicle so it is not seen from the rear. Only visible part is the 2X2 receiver box. The instructions could have shown the two bolt sizes and locations. This would help in getting ready to install.

Chiefhart

12/9/2017

Works as designed and installed. great hitch!



by:

Hello,

I heard of etrailer through
a friend and decided to give it a go. I have not ordered anything from etrailer before, and this being my first time, I thought i would provide some feedback.

Your website was helpful and easy to navigate. For this particular order I decided to call and speak with someone to talk about the 3 options I had for my mini-van, he was very helpful.

I placed the order over the phone and paid extra to have it shipped within a couple days. The order was placed Thursday morning and with an estimated arrive date and time of Saturday, July 17th by 7:PM. I kept with the online tracking though the weekend and into Monday. Finally the UPS tracking updated the website and said it would be delivered Tuesday 20th.

When I received the package, the box was in somewhat rough shape. I figured that it's a metal hitch and that it rough delivery, so I unboxed the hitch to get ready for install. While under the mini-van, my buddy and I lifted the hitch up in place and discovered that the holes are not lining up. We set the hitch down for a closer look and realized that the one side of the hitch is bent. I'm leaving for a trip and needed to have this hitch on before I go, So what we ended up doing was to slowly bend hitch back soa that it lined up with mounting hole.

This was the first time I ever installed a hitch, it was real easy to install and I happy with the finish product. I hoping that there is no long term damage to the hitch from when it was bent in the shipping process and then gently bending it back.

I gave an average rating because etrailer was helpful, but the product delivery could have been more timely and in better condition.



by:

Instructions were great. It took two people, but one younger person could have done it. Towed trailer from Florida to PA with it. No problems.I did recommend to others.



by:
2014 Chrysler Town and Country

Works like a champ. I love how its kinda hidden by the bumper so it doesn't stick out! Only took about 15 mins to install and that was by myself. Just backed the van up some car ramps and had plenty of clearance to install. It takes longer to loosen the muffler than it does to install! Just follow the instructions and the videos and you'll be fine installing this by yourself.



by:
2014 DodgeGrand Caravan

Easy and simple mounting, this vehicle specific receiver utilized the existing fasteners already attached to my van. The most difficult, time consuming part was unbolting the exhaust and moving aside to mount to the passenger side frame rail. Total time to install was maybe 30-minutes once van was setup and tools laid out.



by:

Bought Curt Trailer Hitch for my 2019 Grand Caravan.
It fitted as instructed in YouTube video sent in email.

Installed 3 bike hitch carrier on it and drove around with 2 bikes on it.

I will revisit again after 6 months to mention how the Trailer Hitch is holding up.
So far it’s awesome

Jayesh

7/22/2021

Still holding on and being used weekly. I use mainly for my bike rack. No issues so far and it’s reliable also.



by:
2016 Chrysler Town and Country

Trailer hitch arrived undamaged and went on in about I hour or less. Fits great and does not show much at all. It will mostly be used for bike rack so it's a little overkill for my needs ,but if I have to tow a trailer it will easily do the job.

John

6/24/2021

hitch working perfectly



by:

Repeat customer,easy installation, looks and works great.



by:

It arrived on time. It took less than an hour to install, by myself. The hitch is beautiful, with great welds, and nice powder coating.
This is a first rate company!



by:

This is the second time, i bought stuff from you guys etrailer, excellent job. Thanks



by:

Hitch fits great. Videos made installation easy.
I only wish etrailer.com would protect the receiver with some styrofoam for shipping. Mine was a little scratched up right out of the box, which is a bummer because that is the only part visible once installed on my vehicle!

Etrailer Expert

Sierra K.

6/10/2021

Thank you for your review. Customer Service takes care of all damage done in shipping. This will need to be covered with anti-corrosive spray paint.



by:

On my vehicle, easy installation

Steve

11/6/2023

Excellent product



by:

Installed just like the video. My Son, Ben was visiting & he learned about torque wrenches.
Picture of Ben installing hitch

Tom H.

7/15/2019

Perfect



by:
2012 Chrysler Town and Country

I am a sales Rep in the cycling and outdoor industry and carry bikes and trailers regularly. Bike carriers have increasingly moved from the roof to the hitch mount option over the years and so most of my rack sales need a hitch.

The hitch was surprisingly easy to install and i was able to do it within an hour or so without lifts. It was a little tight getting under the vehicle and turning tools was cumbersome. That said, still easy enough.

I have had no problem with access or clearance with the bumper and have been quite pleased with the hitch. My last trip we visited Big Bend State Park and the road to the HQ is 27 miles of dirt road with an INNO bike rack carrying a fat bike on the rack. I had several bikes on the hitch and never had an issue. I'm around 30k for the past year with something hanging off the back of the car, issue free! Thanks!
N



by:
2014 DodgeGrand Caravan

This is my second time using Etrailer.com for hitching/towing needs and thusly, this is my second hassle-free, perfect, great experience with them.
I was in a pinch and needed a Curt 13364 hitch for a trip to OK that came up quickly. Every other supplier I could find could not give me any kind of shipping time or schedule. I called Etrailer and spoke to Katie D. who took the time and was very courteous and professional with my request. She was able, on a Friday afternoon, to work with me for a proper solution to have the correct hitch shipped to me in DEEP southwest Texas in time for installation before leaving the following Thursday.
Katie D., once the product shipped, kept me updated via email with a tracking schedule that helped me to ensure I would receive it well in time and in good shape, and it did arrive just fine.
Regarding the installation on my 2014 Grand Caravan, pardon the pun but it was installed without a hitch. Taking about 20 minutes to install it went up perfectly with no drilling or cutting of the vehicle body. Utilizing existing bolts in the vehicle, all the holes lined up perfectly.
I cannot say enough good things about etrailer.com and Katie D., they were instrumental in providing what I needed in a timely manner. I would definitely use them again, and recommend them highly!!!!!



by:

works great with no problems easy to in stall



by:

Fits perfect! Followed etrailers youtube video for installation. Used the Curt hitch over the other brands because the receiver tube is longer for better clearance of ball hitch and accessories. See etrailer's hitch camparison video. I'm glad i did because the clearance between the ball and bumper is minimal. I bought an extended and elevated hitch to resolve this issue. Standard free shipping was exceptionally quick!



by:
2010 DodgeGrand Caravan

I picked this Curt hitch over the Draw-Tite hitch because the Curt hitch weighs more which means that it is made with more steel and is a beefier hitch. This Curt hitch bolted up perfectly with all 5 frame bolt holes. I used my floor jack and made a simple wood lifting rig and strapped them together with large cable ties to balance the hitch on the floor jack lifting cup. See my pics. Very happy with this hitch and it installed very nicely! Thanks for the detailed video which really helps!



by:
Hyundai Accent

This isn't the first aftermarket hitch I've purchased and the first thing that struck me was its heft and rugged construction. I thought "...no way was this thing going to fail or degrade in my lifetime."
I read technical manuals daily and the simplicity and detail of the single-sheet instructions were without error. (a rarity these days).
Besides the obvious top quality of product, what I appreciated the most was the quick and courteous service:
1) purchased online; but verified with a phone call that order was received, in stock, and ETA of shipment - the 1st phone call and person who answered had all my questions answered competently (another rarity).
2) the phone operator was intelligent, was without a heavy accent - easy to communicate with.
3) shipment was tracked and status sent to me via email; follow-up email was sent to me inviting me to place a review.
4) This company is WONDERFUL to deal with; wish I needed more hitches!!



by:

This is what I installed Review the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13364. Well I got it on. It took more than the 25 min. that was stated, I guess if you have a garage with a lift and all then that time limit would be possible. I did it in my garage with a floor jack, jack stands and a creeper. It took about 2 hours but it is done and it looks great. Everything that was stated in the video was correct except for the time. I did not need to trim the back valance as it just barely touched it.



by:
2017 DodgeGrand Caravan

Just received my new tow hitch and it is falling out of the box. I know it just a tow hitch but it has a nice powder coat on it and its kind off scratched up which will rust sooner. The product seems really nice and if it fits as shown then it will be perfect. You just need to put some dunnage in the box so it doesnt blow out.

Etrailer Expert

Tyler M.

3/10/2021

Hi Tim, Thanks for your feedback! I would recommend using some rust resistant and corrosion resistant paint to touch up the areas where the powder coating was damaged. Our customer service team will be reaching out to you about this.


25
801
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Will a Trailer Hitch from a 2017 Dodge Journey Fit a 2018 Dodge Grand Caravan
    We do have trailer hitches that fit your 2018 Dodge Grand Caravan, but unfortunately the trailer hitches that fit a 2017 Dodge Journey have a different fit than those that fit a 2018 Dodge Grand Caravan. I recommend going with a 2" trailer hitch as it will have a higher weight capacity than the 1-1/4" trailer hitches and is compatible with a wider variety of accessories. The Draw-Tite Max-Frame Trailer Hitch Receiver # 75579 is the way to go for this situation because the Curt option #...
    view full answer...
  • Trailer Hitch that Fits 2007 Dodge Caravan with Stow N Go Seating
    The Curt hitch # 13389 is the correct fitting hitch for your 2007 Dodge Caravan with stow n go seating. The other two hitches fit different vehicle variations. I attached an install video for this hitch on a 2007 Town and Country similar to yours.
    view full answer...
    Image 1 for
  • Torque Specs for Installation of Curt Class III Trailer Hitch # 13364
    The instructions are confusing, but here's the deal: the 12 mm fasteners have an 18 mm bolt head and the 10 mm fasteners have a 15 mm bolt head. We're not supposed to list the torque specs on our site as they can change without notice and we don't want to have outdated information ever listed so check out the installation instructions to see the torque specs.
    view full answer...
  • Trailer Hitch and Related Towing Items for 2009 Dodge Grand Caravan SE Without Tow Package
    You ask many good questions about towing with your 2009 Dodge Grand Caravan and we certainly can help you. It is perfectly okay to install a trailer hitch on a vehicle that does not have a factory tow package. What matters is that the hitch's and vehicle's weight capacities not be exceeded. The term 'tow package' does NOT always mean exactly the same thing. Various auto makers will use that same terminology for vehicles that differ substantially in their included equipment. For instance,...
    view full answer...
  • Hitch Recommendation for 2010 Chrysler Town and Country Minivan
    Your 2010 Chrysler Town and Country minivan can be equipped with either a 1-1/4-inch Class II or a 2-inch Class III trailer hitch. All options are shown on the link provided. I suggest the Class III hitch # 13364 from Curt; this is the most popular hitch for your vehicle. This 2-inch hitch will offer better compatibility with a broad range of hitch mount accessories like cargo carriers and bike racks, and if you will be towing it will provide higher capacity than the Class II hitches....
    view full answer...
  • Which Trailer Hitch Finish Coating is Most Durable for a 2010 Chrysler Town and Country
    Curt produces their hitch, part # 13364 with a baked-on powder coat. Of all the finishes, I think the Curt is the most durable. However, the Curt powder coat finish is very glossy compared to the others. Some people prefer the dull finish because it attracts less attention. If this is a concern of yours, I would go with the Draw-Tite, part # 75579. It will hold almost as well as the Curt without being so glossy. My grandfather-in-law just had the Curt hitch installed on his 2010 Town and...
    view full answer...
  • Recommended Hitch Mounted Platform Bike Rack Allowing Rear Access on 2015 Chrysler Town and Country
    Using the Saris Freedom SuperClamp with the Draw-Tite Class III # 75579 on your 2015 Chrysler Town and Country might give you enough clearance to open the hatch, but it's going to be cutting it very close. The video of the SuperClamp on the Town and Country is with the Curt Class III # 13364 which, like you said, is longer. Another option is to combine the Draw-Tite hitch receiver with the Yakima HoldUp 2 # Y02443. The HoldUp 2 is a tilting rack to give you more clearance. I attached...
    view full answer...
  • Is Bumper Trimming Required to Install a Trailer Hitch on a 2016 Chrysler Town and Country
    Based on an installation we did of Curt hitch # 13364 on a 2016 Chrysler Town and Country you will not have to trim the rear fascia to install the hitch. However, it may press up some on the bottom of the fascia directly above the receiver. I have included a link to a video showing installation on a 2016 model for you. When installed the hitch measures approximately 13-1/4 inches for the ground to the top of the receiver opening. If measuring to the bottom of the receiver it would be approximately...
    view full answer...
  • Will Curt Multipurpose Ball Mount Carry Harmar Electric Scooter Lift
    Yes, the Curt Multipurpose Ball Mount with 2" Receiver # D210 will be able to carry a Harmar electric scooter lift. According to my research these lifts have a maximum installed weight of 102 lbs, and the Curt ball mount's accessory has a tongue weight capacity of 500 lbs, though keep in mind if you are using the receiver but NOT the ball mount portion as well, it reduces your hitches tongue weight capacity by 50 percent. For example, if you had Curt Trailer Hitch # 13364 on your 2017...
    view full answer...
  • Will Roadmaster Rollaway Trailer Hitch Protector Fit my Chrysler Town and Country 2 Inch Hitch
    The Roadmaster Rollaway Trailer Hitch Protector is a universal fit item. It is designed to fit most 2 x 2 inch Class III and up hitches. We carry 2 different 2 inch hitches for your 2009 Chrysler Town and Country. They are Draw-Tite part # 75579 and Curt part # 13364. I got one of the Roadmaster RM-050 from the warehouse and tested on those 2 hitches and it fit both. If you have one of these 2 hitches, it will fit fine. If you do not have one of those hitches, it will probably fit. You...
    view full answer...
  • Trailer Hitch and Cargo Carrier for 2015 Dodge Grand Caravan
    The issue with using a rooftop cargo bag such as the Rightline Gear Sport 3 Rooftop Cargo Bag # RL100S30 on a minivan with a naked roof such as your 2015 Dodge Grand Caravan is the sliding doors, which could possibly cause some interference with the clips that are used to keep the bag mounted to the roof. Due to that, I recommend going a different direction for your needed extra storage, which you can do without getting a roof rack. A great option would be to add a trailer hitch to your...
    view full answer...
    Image 1 for
  • 7-Way Mounting Bracket Recommendation for a 2011 Chrysler Town and Country with Curt Hitch
    Due to how tight your hitch opening sits to the bumper of your 2011 Chrysler Town and Country I have a solution for you, but the Curt Bracket part # C58000 would not be it. Instead I would recommend the 7-Way Trailer Connector Mounting Box # 18159. This will strap around the cross beam of the hitch and will provide an excellent mounting bracket for your 7-way.
    view full answer...
    Image 1 for
  • 2015 Dodge Grand Caravan Brake Controller and Wiring Recommendation
    Look like your 2015 Dodge Grand Caravan has a towing capacity of 3,600 lbs so as long as you stay under that capacity with the trailer you tow you'd be fine. If the trailer has a 7-way installed on it with brakes you'd also want to install a brake controller and 7-way in your van. You will need to start with a 4-way (if you do not have one). For that you would want the # C56331. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For...
    view full answer...
  • Trailer Hitch and Wiring for a 2014 Chrysler Town & Country with Stow n Go Seats
    I am not sure why you are being asked about the trim level of your 2014 Chrysler Town & Country because the trailer hitches (at least the ones we carry) fit all models so it would not matter if it was a Touring model or something else. The most popular hitch for your van is # 13364. If you plan on doing some towing you might be interested in etrailer ball mount kit # EBMK4EL. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip,...
    view full answer...
  • Hitch Recommendation for 2016 Chrysler Town and Country
    While we do have trailer hitches that will fit and work well for your 2016 Chrysler Town and Country the Curt # C114123 isn't a fit as it's for Volkswagens instead. So I'd recommend the Curt Class III hitch part # 13364 for your 2016 Chrysler Town and Country as it's made in the USA, has a 2 inch opening which means it has great towing capacities and more accessories made for it, and because only the hitch opening hangs below the rear bumper so it's mostly out of plain sight. I attached...
    view full answer...
    Image 1 for
  • What Size Bolts Come with the Curt Hitch 13364
    The difference in diameters of the install hardware is because the fastener sizes listed in step 4 aren't the size of the wrenches used on them. It's the size of the threaded portion of the bolts. Basically the instructions are confusing, but not incorrect. I attached an install video for you to check out as well.
    view full answer...
  • Differences Between Class III Trailer Hitches for a 2018 Dodge Grand Caravan
    All of the Class III trailer hitches for your 2018 Dodge Grand Caravan are actually pretty similar. I recommend going with the etrailer.com # E98854 trailer hitch as it has the most bumper clearance (which is great for accessories) and has a matte finish which holds up much better against scratches from road debris. The Draw-Tite # 75579 and Curt # 13364 are the most common manufacturers that customers ask us to compare. These trailer hitches install the same way and sit in relatively...
    view full answer...
  • Bike Rack Recommendations for a 2013 Chrysler Town and Country with Draw-Tite Trailer Hitch
    When we installed Draw-Tite trailer hitch # 75579 on a 2013 Chrysler Town & Country the distance from the center of the hitch pin hole to clear the rear bumper was 6-1/4 inches. With Curt hitch # 13364 installed that same measurement was 4 inches. I am not sure which hitch was on the vehicle in the bike rack video but I can tell you that you will likely have a similar issue with a mountain bike and the Kuat NV.
    view full answer...
  • Trailer Hitch and Wiring Recommendations for 2013 Dodge Grand Caravan with Stow and Go Seats
    For your 2013 Dodge Grand Caravan with Stow and Go seats I recommend Curt trailer hitch # 13364. This is a 2 inch hitch rated for 400 pounds tongue weight and 4,000 pounds gross trailer weight. I have included a link to a video showing an example installation for you. If you plan on doing some towing I recommend etrailer ball mount kit # EBMK4. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip, and a storage bag. And for trailer...
    view full answer...
  • Fitment and Compatibility of Curt Hitch 13364
    The Curt hitch # 13364 is confirmed to fit all models of Chrysler Town and Country between the years of 2008 to 2016.
    view full answer...
  • Ground Clearance for Curt Trailer Hitch that Fits 2012 Chrysler Town and Country
    When we installed the Curt hitch # 13364 on a similar 2012 Chrysler Town and Country we found that from the ground to the bottom of the hitch is right at 9-1/2 inches.
    view full answer...
  • Troubleshooting Trailer Hitch Install Where Weld Nut Broke in Frame
    If you can access an open end of the frame where the weld nut broke off you could fishwire a new carriage bolt in place of the weldnut. Otherwise you may have to weld the hitch on or see if a local garage like you mentioned could come up with a way to re-weld in a weld nut. For a bolt leader you could then use the # C58400. If you want to get the old bolt out you'd need to use a flexible magnet.
    view full answer...
  • Why Does Bolt Size for Installing Curt Hitch # 13364 Use Different Wrench Size for Torque Specs
    I know it's confusing, but actually the wrench size needed for the bolt does not reflect the actual size of the bolt. When you get the hardware you'll notice that the threaded portion of the included bolts are two different sizes. The smaller of the two would be the 10 mm torque spec and the larger threads are for the 12 mm torque spec.
    view full answer...
    Image 1 for
  • Will Equal-i-zer WD Shank # EQ90-02-4600 Clear Rear Bumper of 2015 Dodge Grand Caravan
    The Equal-i-zer Weight Distribution Shank # EQ90-02-4600 referenced in your question features the 8 inch maximum rise that you are needing and has an overall length of 18 inches. With regards to clearing the rear bumper on your Grand Caravan with it in the rise position, an important measurement to note is the 5 inch distance between the hitch pin hole on the shank the the start of the angled support plate. I have attached an image that clarifies this dimension. We have installed both...
    view full answer...
    Image 1 for


< Previous
123. . .6



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane T
Test Fit:
Shane T
Employee Randy B
Test Fit:
Randy B
Employee Jared G
Test Fit:
Jared G
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Conner L
Test Fit:
Conner L
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Victoria B
Expert Research:
Victoria B
Employee Zack K
Video Edited:
Zack K
Employee Andrew K
Video Edited:
Andrew K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Kathleen M
Video Edited:
Kathleen M
Employee Chris R
Video Edited:
Chris R
Employee Lindsey S
Written by:
Lindsey S
Employee Alan C
Video by:
Alan C
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Schuyler H
Video by:
Schuyler H
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.