Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This sturdy steel hitch from B&W is designed to fit your heavy-duty towing needs. Safety chain loops are built in and an electrical bracket is included for mounting your 7-way trailer connector (sold separately). Powder coat finish resists rust.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
Hitch is designed for vehicles with an 8 inch drop. Drilling required for installation , Product fits vehicles with frame that is 34" wide outside to outside
California residents: click here
Complete Towing Package for 2006 Chevrolet Silverado
2006 Chevrolet Silverado Owners Who Purchased This Trailer Hitch Also Bought...
Replacement Parts Available For This Product
Popular Silverado Trailer Hitch Accessories
Average Customer Rating: 4.9 out of 5 stars (81 Customer Reviews)
This sturdy steel hitch from B&W is designed to fit your heavy-duty towing needs. Safety chain loops are built in and an electrical bracket is included for mounting your 7-way trailer connector (sold separately). Powder coat finish resists rust.
Well made hitch, fit well on my 97 F350 DRW with a DMI bumper. Install went well, only thing that hindered me upon installing was the directions noted to use a certain hole in the frame but if I would of done that the hitch would of been recessed too far in and wouldn't be properly aligned. Thankfully I just used a hole further up and all was well, only reason for a 4/5
I have a 79’ w400 dodge dually and went to numerous hitch stores none of which offered this hitch “ class5” unless they “special “ ordered it and the wait would be at least 2-3 weeks! BS. So I got I line and found B&W, ordered it, was delivered to my door in 4 days. Easy mounting. Already pulled my usual heavy load. Very happy with my experience. I’m ordering my next one soon as well. Ty B$W for no BS
This hitch is well made, however for my truck the bumper and spare tire had to be removed to install. I have removed the hitch to reinstall the original bumper and get the space back in the truck bed. If someone wants a hitch I have one for sale
The B&W Heavy-Duty Trailer Hitch Receiver Item #BWHDRH25198 worked perfect for my 1995 F350 with a drop bumper.
The B&W hitch was installed on a 1997 F350 in Feb 2018. The installation was not as easy as described, four holes had to be drilled in the frame. For some reason the mounting holes had not been drilled out by Ford, who knows this may have been one of the last 97 F350 built. The hitch has worked great with no problems. I've pulled an RV over 10k miles without a hiccup along with utility trailers, great quality hitch. etrailer delivered the hitch in just a few days from ordering and their customer service is wonderful. I would definitely purchase this hitch again.
Installed on a 2wd 1993 Ford F-350 dually. I'd been looking for a hitch that would fit without requiring me to modify or replace my deep drop bumper. This B&W hitch worked perfectly.
I have ordered from Etrailer several times and the products always arrive before the scheduled delivery date. The hitch was well packaged and in perfect condition, all the needed assembly parts were in the box along with easy to read and follow directions.
The truck frame was not pre-drilled for a hitch so I bought new drill bits, charged up the big drill and 2 hours later we're ready to tow.
all as described and fit well
This thing is stout! I had to drill all 6 holes, using a small pilot bit, then a 1/2". I installed myself which wasn't terribly difficult. I used a hydraulic jack to hold the hitch in place to mark the locations to drill. Then I lowered the hitch, drilled holes, and again used the jack to hold the hitch in place while installing the bolts. I have a 6" drop bumper. I initially thought this would be too low, but its perfect for my application.
Installed hitch on 1986 Ford F250. I had to drill all 6 mounting holes on my truck. It took about 1 1/2 hours to install. The online instructional video of a similar model with a drop bumper helped. Hitch is very well made.
Install went pretty easy on my 1985 GMC C30 Dually. No drilling was required!
Note: When you torque the bolts make sure to do it from the bolt head and not the nut side. If you torque the nut you will destroy the lock washer under it. Depending on the size of your torque wrench you may need a crows foot for the two rear most bolts.
This is a great, heavy duty receiver that took less than an hour for me to put it together and installed it on the vehicle with absolutely zero issues. I couldn't be happier. This weekend I'll be pulling a dump trailer with gravel that way I can put her to the test.
Fit my 85 Chevy dually perfectly! No drilling, no welding, just bolt on. Great price and fast delivery. Very happy with my purchase !
Exactly as advertised. Perfect fit out of the box. Works well.
After receiving the hitch and reviewing the instructions, I knew the hitch would be too heavy to manage by myself. After drilling all the holes, I loosely mounted each side on each frame rail. This made it easy to mount the center section. Once in place, I tighten all the bolts. The receiver ended up a little lower than expected but the bumper hid most of the hitch. I am very happy how it turned out.
Tony P.
7/5/2016
The hitch still looks new. The finish is great.
The product fit perfect. I had to remove the spare tire rack but then the product said you would. Took two of us about 1 1/2 hours total time to install. We had to drill six holes in the frame. Make sure you have a high quality steel bit. Drilling the holes was the most difficult part.
Paul
6/14/2016
Working great!
worked as advertised and installed as anticipated. directions were correct and clear.
Very nice hitch. Installed it on my 91 f350 dually crew cab. Some drilling involved but not difficult with a good drill and bits. Have pulled my 28ft, 7000lb travel trailer with no trouble. Hauled my 22ft flatbed trailer with an extended cab truck on it, handled it fine. Excellent hitch, great price too. Thanks etrailer!
This hitch seems well made. I just installed it today on a 1992 Ford F350 that has a cummins 6BT with 4-inch exhaust. Only the rear most holes lined up. The other 2 pre-existing holes on each side were from a much smaller hitch. Thus I had to drill 4 holes total. I also worked alone, so I did as most other reviewers and assembled the hitch as instructed, then used a floor jack to raise it up to the two rear bolts and installed the spacer, washer, nut. Then used c-clamps to hold rear tabs while I readjusted the floor jack. Using a 36-inch piece of 4x4, I supported the rear of the hitch with the floor jack. This allowed me to remove the c-clamps, so I could drill the rear holes. Once I had the rear holes hardware installed, I could drop the jack and move it out of the way to work on middle holes. This is why I mention the exhaust on the truck. The bracket holding the exhaust and the large diameter of the exhaust were both in the way of drilling the middle hole on the passenger side. When I unbolted the exhaust bracket, there was just enough play in the exhaust pipe that I was able to have my wife pull it aside while I drilled the hole and installed hardware. All in all it took 2-hours.
Now the down side, my hitch was packed only in an etrailer.com box and all hardware was in clear ziplock bags. The bags had torn open in shipment and some lock washers were missing and a spacer block was missing. Etrailer.com support is great and replacements are on the way, but I cannot finish the install and torque everything down until the remaining hardware comes. Minor issue and not a reflection of the quality of the product.
Worked great. The hardest part was ordering the correct hitch for fitting my truck. I recall making a diagram and providing measurements and based on that, the nice folks helped me choose which ones would fit. Mine was a bit odd because it had a home-made bumper on it and thus required accurate measurements and calculations in choosing a hitch.
Thanks!! Just what I needed!!
Received this today 01-19-16 after ordering last Thursday I believe. Was able to install in around an hour, and only had to drill two 1/2" holes for the mounting brackets. Was very easy to install, even with just one person. I'm writing this review the night of the install, so I haven't yet had a chance to use it just yet, but I'm sure I will not be disappointed, I've have B&W hitches and receivers in the past and have always had an excellent experience. I highly recommend this product!
Great people at e trailer. Very helpful and actually seem to like what they do and understand their products and the applications. The B&W was the perfect answer for my needs. It fit (after the normal and expected minor bumper mods) great. Don't expect an installation like the 10 min video. More like 2 days for me. But most of the time and knuckle busting was due to the fact that my old drop bumper w/ 10K ball hitch had to be completely dismantled and was (after 20 yrs of salt roads) mostly a grinder, torch, hammer nightmare. Don't count on using existing frame holes either. Then imagine drilling 6 pilot holes, followed by 6 1/2 holes in 1/4 inch steel frame rails while laying on your back working over head.
End result is worth it though, just that knowing what I know now, maybe it would be a job I'd farm out next time. BTW, my truck is 97 f250 HD w/ a 10" laverne drop bumper/hitch.
Etrailer has been good to me. Often less expensive than what I can find locally. Etrailer also has what I’m looking for and gets it to me quicker that trying to source it locally.
The B&W hitch I purchased was the first hitch that has had a questionable fit. In the past I’ve always order Curt. I was able to make the B&W fit, after 3-4 mock ups, and trying different positions
Great product fit well
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina B.
6/20/2023
I checked to see if we offer any hitches that will not require the spare tire to be repositioned andor modified.