Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(243 reviews)
Price: $209.54
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 13314
Retail:$340.95
Our Price: $209.54
You Save: $131.41
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (243)
- Q & A (0)
- Photos
CURT Trailer Hitch - 13314
- Class III
- 2 Inch Hitch
- 3500 lbs GTW
- Visible Cross Tube
- CURT
- 350 lbs TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 350 lbs
- Not rated for use with weight-distribution systems
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13314 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 1997 - 2001 Honda CR-V
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
- Manufacturer issue
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13314
Average Customer Rating: 4.8 out of 5 stars (243 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: W K06/12/2023
1999 Honda CR-V
This hitch is heavy duty and the reason why I chose this hitch is due to it being American made. Yes, USA made and not those chinese cheap junk.
The tutorial online at eTrailer helped a lot. Install took me about an hour because I took my time watching the video first then played it part by part by pausing the video as I do the install. Be sure to torque all the nuts.
Attached a back up light on the hitch for more visibility at night.
by: Jeff04/10/2020
Hardware (carriage bolts and spacer) was too large to fit in frame access hole. I emailed etrailer about the hardware not fitting and they sent me a link to the install video. They were not helpful in resolving the issue.
I ended up going having to manually file the access hole in order to make the hardware fit.
The install was extremely frustrating due to the tight access.
by: Brian11/22/2021
2001 Honda CR-V
Product arrived beat up from shipping. The carriage bolts they sent were too large to be fed through the holes in my vehicle's chassis, even though this hitch was designed for my exact make, model, and year Honda CR-V. I had to drive 30 minutes each way to pick up a 40 dollar drill bit (a massive 1" metal bit). When I finally mocked it up with the bolts that had been fed through the frame, I found that the hitch itself was bent on both sides, probably from shipping. The holes didn't match up with the bolts. Realizing it would be a huge hassle to return the unit, I opted to optically align the hitch by bending it with another large person to help me. Not very confidence inspiring! it seems like it would be a great unit if they bothered to spec hardware that fits and packaged it better. Either this unit was fabricated without a proper jig, or the shipping carrier really mishandled my item. Either way, etrailer and/or Curt should be more careful. I imagine they ship thousands of hitches a year so I would have expected these things to be sorted out. It gets 2 stars because it had potential to be a great experience.
Sierra K.
11/24/2021
I apologize for these inconveniences as it seems as though your hitch experience had all the common issues that are sometimes associated with installing these receivers. Because you have a 2001, the weld nuts probably needed cleaned which is where the hardware not fitting is the first issue that could have been easily resolved. Attached is a help article explaining this. Secondly, the hitch receiver was flexed. This has a fix of bending back into alignment with the help of this other attached help article.
by: Jhonny07/22/2023
1997 Honda CR-V
Did not fit at all waste of money. The holes are off by almost a inch after going thru all the trouble or trying to make this crap fit
Katrina D.
8/3/2023
If you are having troubles with the holes not lining up, it could be that the hitch has been flexed during shipment. This is common amongst hitches, since the mounting brackets are made from a mild steel that allows the hitch to flex with the vehicle after installation. If the entire hitch was made of rigid steel, there would be a greater chance of the hitch being damaged and experiencing stress cracks. Such cracks could cause the hitch to malfunction. This flexing often times will cause the holes not to align. Because of this we do have a help article I have the link attached below that will walk you through the process of straightening the hitch.
Helpful Links
by: Rey A.09/11/2017
1997 Honda CR-V
The product is very good for the price. Install easily. the installation
kit was very helpful especially the wire that would attach to the bolt.
There's one issue, the width was an inch short. I had to force swing
the front hole to line up with the chassis hole, the back hole, I had to
rim the chassis hole to line up with the hitch hole.
Unfortunately, when I was rimming the hole, the wire was hanging in the
hole and broke off, leaving the bolt and the washer inside the chassis.
I wonder if it's possible to send me another bolt, washer and the wire that attaches to the bolt cause I can't get the bolt and the washer plate out.
bolt.
by: Kris07/23/2021
2002 Honda CR-V
Overall good build quality and install kit. The passenger side support is too close to the stock muffler and the exhaust hits at times. Don't expect them to change the design on a hitch for a 20+ year old vehicle. The receiver is just long enough that my Rocky Mounts bike rack clears the spare tire without need of an extension. You rack may vary.
by: Jordan04/23/2020
This is a great price for the product.
That said, I had to drill out the U-bolt mounting bracket as the holes were not aligned correctly, but a 1/2 inch drill bit will offset the difference and allow for mounting to the tow point.
The fish wire idea utilizing existing unibody frame holes is a great idea, but it would be nice to have 2 fish wires in the kit. By the 4th hole, the fish wire doesn't like to come off the bolt and causes a small clearance issue, solvable with some vice grips.
All said, minor modification and it's a pretty straightforward kit.
by: Dak07/22/2016
2001 Honda CR-V
Haven't towed anything yet but part 13314 installed very solid on my 2001 Honda cr-v. 4/5 stars because the bolts and the silver rectangle things don't fit through the middle hole. Which required me to grind of a slit in the hole and bend it out with crowbar to get these parts to fit through there. I used a grinder because I lacked other tools. Just be prepared to drill on your cr-v with this kit. (Not a suggestion to void warranty but it's so it can be bolted on in the first place).
1 of my pictures shows that slit I made.
Thanks. And thank you etrailer.
by: Mike01/20/2012
1998 Honda CR-V
I watched the video of the hitch installation before doing my install. I had thought removing the exhaust hangers might be difficult ... it wasn't. I installed without assistance BUT I had a jack to hold hitch in place while getting bolts lined up. If you don't have this tool, it will be a two person job.
Customer service from eTrailer was excellent! ( BTW I am a repeat customer )
by: Anthony07/21/2022
Super easy to install and heavy duty. Shipping was fast. Looks to be a great product for the price. Don’t forget to buy the wiring harness at the same time like I did!
by: Anthony W07/27/2016
2001 Honda CR-V
Install was quick and easy. Wiring was a breeze connector was behind speaker on left side for trailer lights. Only thing is my exhaust rattles on hitch now. Just kind of annoying but worth it to have a hitch.
by: Markee11/11/2021
Tested it right away for towing a car using a car dolly. It held pretty good with no problems and towed the car for 300miles and was cruising at 80mph with no issues.
by: Nicholas05/09/2022
Great price, had the vehicle matched wording harness easily accessible and install was a dream especially with the videos on [online] from their channel. Definitely have my business in the future.
by: Noah 08/02/2023
Honda
Its exactly what I needed. RD1 Honda crv 2 in hitch.
by: Daniel s.06/18/2013
Got it just in time,the install was fairly easy. it really does take two people though. One to handle the piece and I one bolt it on. It looks great and works great. Definitely a good quality piece and company.
by: Barry09/07/2017
Very good hitch.easy installation.
Take it out of the box . If it's not installed in 30 min you stopped for lunch
Now I'm ready for the road
by: Richard A.03/23/2017
2000 Honda CR-V
So far the hitch fit perfect. Less then 25 minutes the hitch was done. Perfect fit.
by: Danny Dang08/27/2014
Thanks for the follow up, the product was great, video help to install easy. Thanks for care and stand by your product. I am glad that is made in USA. Thanks again !!!
by: Christopher07/14/2019
1999 Honda CR-V
Wonderful product. Got it fast and very easy to install. Quality and finish are great. Makes hauling our Grumman canoe a lot easier.
Christopher
7/16/2020
After a year the hitch is still like new. Fantastic product.
by: Richard L01/27/2017
1999 Honda CR-V
I bought the class 3 hitch and wiring harness for my 99 crv. I had watched the installation video before receiving the parts and it seemed pretty straightforward. When it arrived, I installed it during my lunch in 35 minutes and the fit and finish looks factory! The next day during lunch installed the wiring harness in about 20 minutes. It uses the factory connector and tucks away invisible untill you need it. I am THRILLED with the product and looking forward to using it. The car is rated for a 1000 lbs towing and the hitch is overkill, but I already had the 2" insert and ball and the price is the same as a lighter duty hitch. To me it seems the best deal on the market.
Richard L.
1/28/2018
Thank you for your interest in my satisfaction! I find it hard to believe you can follow up on every purchase made online but I feel good that you are asking for my opinion.Let me assure you that I am completely, 100 satisfied with the Curt hitch and wiring harness that I bought. It was a piece of cake to install ok, Im a mechanic and it is probably stronger than the car I installed it on. I have pulled my trailer with complete confidence and am delighted in the products you offer.Thank you!
by: Jeff T.05/30/2016
Honda
This hitch was for my son's old 1999 Honda CRV. Crawling under and working on a 17 year old car that lives in the winter salt is never fun, and fishing the bolts and backing plates into place can also be something of a challenge. I strongly encourage you to measure the spacing of the bolt holes on the hitch so you can make sure that you install the hardware correctly. Don't ask me how I know. I guess having to drop the rear part of the exhaust system is pretty standard when installing a trailer hitch, and this is no exception. Also, the instructions could be a bit more detailed. When all was said and done, however, the hitch fits perfectly and I could not ask for anything more, especially at the e-trailer price.
Jeff T.
1/24/2018
My son has used the hitch to tow a trailer from Ohio to Texas and back again. It really is a great hitch at a great price.
by: Doug 07/22/2020
Honda
After a year of owning this hitch it is working well, just as designed on my '97 Honda CRV. Would recommend this hitch to anyone considering it for hauling riding lawn mowers or for a slide in bike rack.
Doug F.
7/23/2021
Great! No issues
by: Tennison09/11/2022
1999 Honda CR-V
The hitch works great, and with the lift and tires I have installed, it fills out the back of the car nicely. I have since towed 3500lbs with it, and the car may not like it very much, but it did it, and the hitch worked just fine. My only issue is that is was not packed well enough in shipping. When it arrives, the two arms that go between the frame rails and the draw bar were bent. I would not have been able to install it if I was not able to forceably bend it straight again.
by: Elijah09/23/2022
1998 Honda CR-V
Installed on my 1998 Honda CR-V, has worked fantastic! Took only about an hour to install by myself, torqued it down and haven’t had any problems or loosening since. Regularly tow my small trailer with my motorcycle and four wheeler on it (about 500 lbs total) with no trouble. Highly recommend!
by: Douglas G.06/13/2018
2001 Honda CR-V
I am very pleased with the product that i purchased, at a fair market price it is quality made and easy to install.. I would also like to mention a Thank you to Lori who guided me through my purchase... and also like to mention that etrailer has a wonderful staff that has assisted me on this and other issues... Dena & Gwen you have a first rate staff that are professional, patient, and polite.. PPP= Excellent...
Douglas G.
6/14/2019
All is good, the hitch is all I could have hoped for... No problems... Thank you. I will be a returning customer..
25
258
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Will the Draw-Tite # 24790 Work with a Thule Helium Bike Rack on a 2000 Honda CR-VThe Draw-Tite Class I Receiver Hitch, item # 24790, would be a good choice for your 2000 Honda CR-V. You will be able to use the Thule Helium Aero Aluminum 3 Bike Carrier, item # TH9043PRO, on the CR-V as long as the measurement from the center of the hitch pin hole to the farthest out part of the spare tire is less than 14-3/8 inches. If the measurement on the CR-V is going to be longer than that the Helium rack would not fit properly. There are other options if the Helium rack will not...
view full answer... - Trailer Hitch Recommendation for a 2000 Honda CR-VWhen installing any trailer hitch you would have to use all attachment points specified in the instructions. So if you wanted a higher capacity hitch like # 13314 you would have to have that center tow loop welded back onto the vehicle. You will want to consult the vehicle owners manual regarding the towing capacity. From our experiences, the 2000 Honda CR-V is capable of, at most, 1,500 pounds, regardless of what the hitch is rated for. Going with a lower capacity hitch like # 24790...
view full answer... - Recommended Trailer Hitch for 2000 Honda CR-V with Capacity to Handle 4-Bike Hitch-Mount Bike RackYour 2000 Honda CR-V can be fitted with either of two sizes/classes of hitch, a 1-1/4-inch light-duty Class I type like the Draw-Tite # 24790 you referenced or a higher-capacity 2-inch Class III type such as # 13314 from Curt. In order to use a 4-bike hitch rack you must have a Class III hitch installed on your CR-V. A hitch install video and helpful article are also provided. You will also need to use a stabilizing strap # 18050 along with the Curt hitch to help support the rack load;...
view full answer... - What is the Weight of the Curt Trailer Hitch Receiver #13314The shipping weight of the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13314 is 38 lbs. The actual weight of the hitch will be abut the same.
view full answer... - Bike Carrier Options for 2 Bikes on a 2001 Honda CR-VWe do have options for you to carry a 2 bike rack on your 2001 Honda CR-V, however, a trunk mounted bike rack will not fit on your vehicle. The rear mounted spare tire will not allow a trunk mounted bike rack to mount safely. Instead, I would recommend either a spare tire mounted bike rack or adding a trailer hitch and a hitch mounted bike rack. For your vehicle you can use the Thule Spare Me 2 Bike Rack, # TH963PRO. The mounting plate for this bike rack will mount between your vehicle...
view full answer... - Bike Rack Recommendation for 1999 Honda CR-V That Can Allow Access to Rear Cargo AreaIf you need to access the rear cargo door area of your 1999 CR-V with bikes loaded I have a solution that will work for that but you can't open the rear door of a vehicle with a spare tire mounted bike rack installed. The hinges of the door aren't rated for the extra which means you could damage them. You'd have to go with a hitch mounted bike rack that can swing out like the SportRack Ridge Swing part # SR2415 which can swing out and away from the rear of a vehicle with bikes loaded to...
view full answer... - Hitch and Bike Rack Recommendation for a 2001 Honda CR-V Carrying 3 BikesThe best hitch for carrying three bikes that is available for your 2001 Honda CR-V would be the Curt Class III Hitch # 13314. This is a Class III hitch that has more than enough capacity to carry three bikes. The Draw-Tite Hitch # 24790 that you referenced is a Class I hitch that only can handle 2 bikes at most so it would not be a good choice for you. There are Class II hitches that are 1-1/4 that can handle 3 bikes, but it looks like there are only Class I and Class III hitches available...
view full answer... - Will a Bike Rack Clear the Spare Tire with Curt Trailer Hitch 13314 Installed on a 2001 Honda CR-VWhen we installed Curt trailer hitch # 13314 we found that it measured 6-1/2 inches from the center of the hitch pin hole straight back to the distance required to clear the spare tire. This is important because you will need to measure the bike rack in the same manner. Please take a look at the FAQ article I have linked that shows how to take this measurement. Measure on the bike rack from the center of its hitch pin hole to the back of the upright mast on the bike rack. If that distance...
view full answer... - Does the Receiver on Curt Trailer Hitch # 13314 Stick Out Past the Bumper on a 1997 Honda CR-VWhen Curt Trailer Hitch, # 13314, for the1997 Honda CR-V is installed on the vehicle, the receiver opening will be slightly rear of the back bumper, so it will stick out some. Exact placement can vary between models. I have included a link to the instructions for you to view. When you do have a hitch installed, you will need to take an important measurement to determine the clearance. Measure from the center of the hitch pin hole out to the distance required to clear the spare tire. This...
view full answer... - Recommended Bike Rack and Trailer Hitch for 1999 Honda CR-VThere are definitely options for you to use a hitch-mounted bike rack on your 1999 Honda CR-V despite the offset spare tire. For a hitch you are going to want the Curt # 13314 which is a Class III hitch with a 2 inch receiver because it gives you many more options for a bike rack than the other available hitch that fits your CR-V, which has a 1-1/4 inch receiver. The Curt hitch is going to require the use of stabilizing straps # 18050 with all non-trailer accessories such as bike racks...
view full answer... - Trailer Hitch and Wiring Recommendation for Towing Trailer with 1999 Honda CR-VThe Curt hitch part # 13314 is a confirmed fit for your 1999 Honda CR-V and would work well for towing a small utility trailer like you mentioned. You would not need the part # PSA256S0303 as the trailer rental place would already have a coupler installed on the trailer. You will need trailer wiring, for that you would want the # 118336 which is a confirmed fit. The trailer rental place could possibly have a ball mount that you could use, but if not we have a solution. You might be interested...
view full answer... - Will Curt Trailer Hitch and Extender for 2001 Honda CR-V be Able to Carry 110 lbs of Tongue Weight?Curt Hitch # 13314 has a tongue weight capacity of 350 lbs, and Brophy Hitch Extender # HE06 will reduce that capacity to 175 lbs so you will be fine to transport your 110 lbs of cargo - a 46 lb bike rack and pair of 32 lb mountain bikes. The only other thing I wanted to note was that this hitch is going to require the use of stabilizing straps # 18050 with all non-trailer accessories such as bike racks and cargo carriers in order to maintain the warranty.
view full answer... - Ordering Replacement Hardware for Curt Hitch that Fits 1999 Honda CR-VWe do offer replacement hardware for all of the hitches we carry with the part # RHK. On the product page you'd need to select Curt as the manufacturer and enter the part number # 13314.
view full answer... - Recommended Trailer Hitch Receiver, Wiring, And Ball Mount For 1998 Honda CR-VFor your 1998 Honda CR-V, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13314. This is a far stronger hitch that will give you some options for many accessories as well as ball mounts. I never recommend a Class I hitch receiver if other options are available as it is extremely limiting in every way. For your trailer wiring, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118336. This harness connects to factory...
view full answer... - Hitch Recommendation for a 1998 Honda CR-VYes, the Curt Trailer Hitch part # 13314 that you referenced has been confirmed to fit all models of the 1998 Honda CR-V so it will work on yours. I attached a link to an install video to the right for you to check out as well. For trailer wiring you would want the part # 118336. For ball mounts I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag. Lastly, some models of the Honda CR-V have pretty low towing...
view full answer... - What Parts Can I Use to Adapt a 2 Inch Bike Rack to a 1-1/4 Inch Hitch for a Honda CR-VYou can use a 1-1/4 to 2 inch adapter like part # HTAD, however, this will reduce your tongue weight capacity by 50 percent. Draw-Tite hitch, part # 24792 has a tongue weight capacity of 200 pounds. If you were to use an adapter like # HTAD, your capacity would be 100 pounds. This means that the combined weight of the bike rack and bikes must be 100 pounds or less. If the tongue weight capacity of the vehicle is less than 200 pounds, take 50 percent of that number. Your vehicle towing capacities...
view full answer... - Spare Tire Mount Bike Rack Recommendations for a 2000 Honda CR-VI would recommend a spare tire bike rack. You could use something like Yakima SpareRide 2, part # Y02599 or the Thule Spare Me, part # TH963PRO from Thule. Both of these will fit your spare mount and can be adjusted so that the bikes are centered on the rear of the vehicle. If you wanted to carry 3 or 4 bikes, a hitch mounted rack would be a better option for you. If you decided to go this route, you would first need to install a hitch. I would recommend the Curt Class III, part # 13314....
view full answer... - Replacement Install Hardware Recommendation for Curt Hitch for 2001 Honda CR-VThe Curt hitch you'd have for a 2001 Honda CR-V would be the part # 13314. So to order replacement hardware for this hitch you would want the part # RHK. Which on this product page you would need to enter the 13314 for the hitch part number and then select Curt from the drop down menu and we'll ship you out the correct hitch hardware. I also attached an install video for this hitch for you to check out as well.
view full answer... - Trailer Hitch and Wiring Recommendation for 2000 Honda CR-VFor towing a trailer with your 2000 Honda CR-V the best option for a hitch would be the Curt Class III part # 13314 which is the more popular and higher weight rated 2 inch hitch size. You will need trailer wiring to cover the lights of the trailer when towing so for that the best option is the Tekonsha part # 118336 as it has the easiest install and the most reliable converter box. For a ball mount solution the part # EBMK4EL would be a solid choice as it has a 4 inch drop and ability...
view full answer... - Recommended Trailer Hitch And Bike Carrier For 1999 Honda CR-VThe trailer hitch we offer that has the shortest distance from the center of the hitch pin hole to the outside edge of the rear-mounted spare tire on a CR-V is the Curt Trailer Hitch, part # 13314. That measurement is 6-1/2 inches. This is a Class lll hitch and it has a 2 inch receiver opening. This measurement was taken with a 2000 CR-V, but a word of caution is to make sure you do not have an oversized tire on the back that could affect the clearance you need. I have attached a link...
view full answer... - Does Using a Hitch Adapter Change the Hitch Tongue Weight CapacityUsing a hitch adapter like the one shown in the photo you provided will lower the tongue weight of your existing hitch by 50 percent. The Class I hitch on your 2009 Accord would normally have a tongue weight capacity (maximum amount of downforce that can be applied to the hitch without causing damage) of 200 lbs. Because using the adapter moves the load further away from the hitch, more leverage will be applied to the hitch, so using the adapter lowers the tongue weight capacity to 100...
view full answer...
- Replacement Hardware Kit for a 2001 Honda CR-V HitchYes, we do sell replacement hardware kits. You will need the Replacement Hardware Kit item # RHK. This kit will include all the necessary bolts with proper grades, spacers, nuts, and the fish wire tool you will need to complete the installation. The price is on the right side of the product page. You will want to go where it says Hitch Item Number on the right hand side of the page and type yours in. It looks like there are only two class III hitches for the 2001 Honda CR-V and I have...
view full answer... - Recommended Trailer Hitch Receiver For Carrying 2 Bikes With 1996 Honda CR-VI may have an option for your but since the 1996 Honda CR-V was only available in Japan we do not offer a trailer hitch receiver confirmed to fit. If you CR-V was manufactured in 1996 but is a 1997 model year made in North America I recommend the Curt Trailer Hitch Receiver # 13314 which is a 2" trailer hitch receiver which is my recommendation any time it is available due to there being more bike rack, and cargo carrier options than the 1-1/4" receivers. If you do not already have a...
view full answer... - Will etrailer.com Trailer Hitch Receiver for 2013 Honda CR-V Fit a 2000 Honda CR-V?The etrailer.com Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # E98868 is only compatible with 2012-2016 Honda CR-V models. I don't recommend making any changes to the hitch or installation as that could greatly impact its safety and rated capacities. I recommend instead getting the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13314 which is a custom fit the 2000 CR-V.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Written by:
Lindsey S
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Victoria B.
4/13/2020
The 2001 CR-V in the installation video had a large enough access hole that it did not need to be enlarged for the spacer block. Unfortunately, your CR-V seems to have a smaller access hole. In the instructions, Step 2 indicates that if the hole in the frame is too small, it will need to be enlarged to 1-1/4 inch diameter. I have linked the instructions for your convenience.
Helpful Links
instructions.aspx?pn=13314