Rubber Hollow Bulb Seal for RV and Trailer Door - Stick On - 25' Long x 3/8" Tall

Video Transcript for Review of etrailer Trailer Door Parts - Stick On Rubber Hollow Bulb Seal 25 Foot - CS73FR

Hi, everybody, Andy here with etrailer.com and today we're gonna take a look at this etrailer stick-on rubber hollow bulb seal for your RV and trailer doors. Now with this stick-on rubber seal you're going to be able to replace your broken or worn out weather stripping around your doors and hatches on your RV before water damage creates a costly headache. Now as you can see here this is a peel and stick installation with pre-applied acrylic adhesive backing. Now, surface preparation is recommended to remove any old adhesive, and then you're just going to simply remove the backing from the seal as I'm doing right here and apply the seal to the frame. Now this is going to set in about 48 hours and then if you have any extra that you don't need you can just simply trim this with a pair of scissors. So very easy installation and very easy to cut to fit.

Now this is made here in the USA of EPDM rubber. This won't shrink or crack or fade over time and it's also resistant to UV damage. Let me retrieve my ruler here and just go over some measurements that might prove helpful for you. Lining this up here, looking at the width, the width first, we are sitting right at half an inch wide. Lemme set this on the table and give you the height.

The tallest point there, it looks like we're sitting right at about three eighths of an inch tall. Now what I have here on my table is a 25 foot long bundle but we do also offer this in a 15 foot and a 50 foot bundle. So whichever length is going to work best for you, you can just take the item number that you see there on your screen, put it in the search field of our website, and that will take you to the length that you are looking for. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you.

Again, my name is Andy. Thank you for joining me.