Replace broken or worn-out weather stripping around your doors and hatches on your RV before water damage creates a costly headache. Peel-and-stick adhesive is pre-applied for an easy DIY installation.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com and today we're gonna take a look at this etrailer Stick On Rubber Hollow Bulb Seal for RV and trailer doors. With this stick on rubber seal, you're going to be able to replace your broken or worn out weather stripping around your doors and hatches on your RV before water damage creates a costly headache. Now, as you have no doubt noticed, this is a peel and stick installation with pre-applied acrylic adhesive backing. Now, surface preparation is recommended to remove any old adhesive, and then you're just going to simply remove the backing, as I've done here, and apply the seal to the frame of your RV. Then you will just use scissors to trim any extra seal that you don't need, and that acrylic adhesive will set in about 48 hours. Now this is made here in the USA of EPDM rubber, so this is not going to shrink or crack or fade over time and it's also resistant to UV damage.
Let me go ahead and retrieve my ruler here and just give you some overall measurements that might prove helpful for you. Looking at the height of the seal, as you can see we're sitting right at 5/16 of an inch. And then looking at the width, looks like we're sitting right at 3/8 of an inch. And what I have here on my table is a 15-foot long bundle, but we do also offer this in a 25 foot and a 50 foot option as well. So whichever length is going to work best for your application, just take the item number that you see there on the screen and put it in the search field of our website, that will take you to the length that you are looking for.
Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.
Average Customer Rating: 4.2 out of 5 stars (9 Customer Reviews)
Replace broken or worn-out weather stripping around your doors and hatches on your RV before water damage creates a costly headache. Peel-and-stick adhesive is pre-applied for an easy DIY installation.Replaced original. Easy install, good s eal.
The experiance purchasing the roof garnish for my trailer was excellent even though i made a mistake first time an ordered the wrong one ,they made it easy to send them back and reorder the new ones a five star exsperiance
Very good weather seal, easy to apply, customer service was excellent
Easy to install on our camper door. Had a ripped seal on the door.
Ordered in October 2022 and have not received as of February 2, 2023 because of back order. Not acceptable!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.