etrailer XHD Non-Binding Tow Bar - RV Mount - 2" Hitch - 10,500 lbs
(114 reviews)
Price: $884.32
In Stock
etrailer XHD Non-Binding Tow Bar - RV Mount - 2" Hitch - 10,500 lbs
Item # e94ZR
Our Price: $884.32
In Stock
- All Info
- Reviews (114)
- Q & A (0)
- Photos
- Used (1)
etrailer Tow Bar - e94ZR
- Fits Demco Base Plates
- Fits etrailer Base Plates
- Telescoping
- Hitch Mount Style
- 10500 lbs
- etrailer
- Non-Binding
- Stores on RV
- Steel
This sleek tow bar can handle your large vehicle, no problem. Heavy-duty but not heavy: arms support their weight while you hook up and swing easily to either side for storage. Integrated safety cables keep your setup organized. Built-in rise/drop.
Features:
- Safely bring your heavy vehicle along behind your RV
- Self-supporting arms won't fall to the ground as you're hooking up
- Smoothly extend and pivot to reach the base plate
- Automatically lock into towing position when you pull forward
- Extra-long arms help you make tight turns
- Built-in rise/drop and tilt ensure tow bar is level during towing
- Quick disconnect, even on rough terrain, with non-binding triggers
- Organized setup
- Straight safety cables are integrated into the tow bar
- Integrated storage rod keeps electrical cord (sold separately) off the ground
- Effortless storage: swing arms to the left or right and they'll lock in place
- Lifetime technical support from the experts at etrailer.com
- Made in the USA
Specs:
- Fits: etrailer and Demco base plates
- Other models available to fit base plates from other manufacturers
- Application: 2" x 2" trailer hitch receivers
- Arm length (from center of hitch pin hole at end of shank to center of base plate pin hole when lined up with arms straight):
- Extended: 51-3/4"
- Retracted: 39-1/4"
- Built-in rise/drop: 1-1/2"
- Head tilts an additional 3" up or down to keep tow bar level with the road
- Weight capacity: 10,500 lbs
- Weight: 46 lbs
- Safety cable rating: 14,000 lbs
- Lifetime limited warranty
Note: If you add a hitch extender to your setup, you may need safety cable extensions (sold separately) to reach your tow vehicle's hitch.
| Base Plate | Model |
|---|---|
| Blue Ox | e67ZR |
| Roadmaster Crossbar-Style | e64ZR |
| Roadmaster Direct-Connect | e84ZR |
| Duncan | e57ZR |
| Reese or Valley Industries | e97ZR |
Easy Hookup: Self-Supporting Arms
The etrailer XHD has a lot of smart features that give you the flexibility to hook up your toad (towed vehicle) to your RV, without the need for your vehicle to be perfectly level or in the exact right spot.
First of all, the arms are self-supporting, meaning that they hold themselves up without your help and won't fall to the ground when you let them go. They also move independently of each other, so you can focus on getting just one arm connected at a time. You'll never be stuck wrestling with a heavy tow bar.
Just slide the tow bar into your hitch and pin it in place. The telescoping arms will extend, pivot, and tilt to the needed length and angle to reach the tabs on your base plate. You can get hooked up and on with your adventure.
Once the tow bar's connected, slowly pull forward and the self-aligning arms will fully extend and lock into the towing position. Double check that the arms are properly latched and you'll be ready to hit the road!
Important: The arms need to be set up so that the storage rod is on the outside of the arm. Otherwise, the tow bar could be damaged when taking turns.
Extra-Long Arms Get You Around Tight Turns
The XHD's arms are longer than average, giving you an above-average turning radius. You're going to be able to get around obstacles and make sharp turns with no worry of clipping the corner of your RV. Maneuver through gas stations and the campsite no problem.
Built-In Rise/Drop
It's important that your tow bar is as level as possible while you're flat towing, with no more than a 3" difference between where the tow bar sits in the hitch receiver and where the arms meet the base plate. It's fairly common for the hitch on an RV to sit too high in comparison to the toad, making it necessary to buy a high-low adapter.
With etrailer tow bars, the rise/drop is built right in, so it's less likely that you'll need an extra adapter. The head joint is also able to tilt up and down so you can make the tow bar level for your particular setup.
Non-Binding for Easy Disconnect
Uneven ground and sharp angles can put the arms of the tow bar in a bind and make them stiff and immoveable. Once you get to your destination, the last thing you need is to spend several minutes wrestling, yanking, and kicking at them to get your car disconnected.
Instead, get out of a bind in one easy step. Simply give the trigger on the arm of the XHD a squeeze to disengage the internal latch. This releases the pent-up pressure so you can unhook and get on with your adventure.
Each trigger release latch is positioned on the side of the tow bar arm. This allows for a comfortable yet firm grip, unlike latches that are positioned on the tops of tow bar arms, which can be difficult to grab. This out-of-the-way placement also creates a clean look for the tow bar.
Organized Setup: Integrated Safety Cables
Two straight, vinyl-coated safety cables are integrated right into this tow bar, keeping them from dragging on the ground and getting damaged. They won't get lost or tangled either; your whole setup will be streamlined and organized.
These cables, required by law, will keep your toad behind your RV if there's ever an accidental disconnect while you're towing. The steel S-hooks on each end of the cables connect to the toad's base plate and the RV's trailer hitch, with spring-loaded latches to ensure that they stay connected.
The etrailer safety cables are rated at 14,000 lbs, regardless of the rating of the tow bar. While it's not necessary to have such a high rating, it's nice to know that in the event of an emergency disconnect, these heavy-duty cables will be more than capable of catching your vehicle. If all else fails, these safety cables won't.
The tow bar also offers a convenient storage rod for securing your coiled electrical cord (sold separately). The rod holds your power cord neatly out of the way and up off the ground.
Ridiculously Easy Storage
The etrailer XHD is incredibly easy to store on the back of your RV. Most RV-mounted tow bars require you to lift the heavy arms all the way up; they have to be fully vertical before you can secure them in the stowed position. With etrailer tow bars, all you have to do is raise them an inch or two - which you probably would do anyway while unhooking - and swing the arms to either side. When you lower them down again, the locking pin will automatically slide into the built-in tab. They can store to the left, right, or with one arm each way, however is convenient for you.
etrailer Technical Support
At etrailer, we're committed to the products we sell, and to helping our neighbors journey. We don't just sell it; we've installed it, we've wired it, and we've towed with it, so you're getting your answers straight from the experts. Our etrailer technicians perform flat tow installations on a daily basis, so they know all about your tow bar firsthand. For the life of your tow bar, our experienced and knowledgeable staff are available via phone, email, and chat to help you with any questions or concerns.
What You Need to Flat Tow
Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly. It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up.
To flat tow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flat tow braking system.
| For the RV | Between the RV and Towed Car | For the Towed Car |
|---|---|---|
| Hitch | Tow bar | Base plate |
| Wiring plug | Safety cables | Braking system |
| Wiring adapter cord | Wiring kit/diodes |
The custom-fit base plate installs on the frame of your toad so you can connect the car to your RV with a tow bar. Hook up safety cables between the vehicles to ensure that the toad does not separate from the motorhome if the tow bar becomes detached. Tow bar wiring syncs your vehicle's signal lights with your motorhome's tail lights, as required by law in most states. Finally, the flat tow braking system - also required in most states - activates the brakes in the toad when you hit the brakes in the RV, making for smoother, safer braking, and preventing wear on your motorhome.
9998973 etrailer.com Xtra Heavy Duty Non Binding Towbar - Motorhome Mounted Towbar - 2" Hitch - 10,500-lb Rating
9998989 Clevis End Kit for etrailer XHD Tow Bar
Installation Details
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Too difficult to install
Customer Reviews
etrailer XHD Non-Binding Tow Bar - RV Mount - 2" Hitch - 10,500 lbs - e94ZR
Average Customer Rating: 4.6 out of 5 stars (114 Customer Reviews)
This sleek tow bar can handle your large vehicle, no problem. Heavy-duty but not heavy: arms support their weight while you hook up and swing easily to either side for storage. Integrated safety cables keep your setup organized. Built-in rise/drop.by: Jay 03/30/2024
I'm not sure there could be anything better for the tow bar to do. I love the ease of hooking and unhooking in less then 2 min. and the cable holder for the light hookup cable and air hookup so they can't drag on the ground. The release levers work great for taking the tension off the bars to unhook and the storage of the tow bar on the back of the RV works great. All and All I could be happier
by: Tom F09/10/2023
Very rugged tow bar. You will need this cover: Roadmaster Tow Bar Cover
Item # RM-055-3 because the arms don't lock in the short position so they just slide out to the extended lock position when stowed without a cover.
by: David 01/22/2024
Am very pleased with the tow bar.
by: Richard K02/10/2023
I use the XHD non-binding tow bar to pull a Jeep Grand Cherokee behind my Class-A motorhome. The XDH tow bar works great. It is easy to hook-up and stores nicely to the side when not in use. I especially like the Non-binding release, which makes it easier to unhook.
by: Dale 09/16/2023
Easy to set up. Love the extra features. Very well thought out design, highly recommend it
by: Harry11/24/2021
There were some marks in the finish do to shipping and the operator manual was damaged to the point that i could not read some parts.
by: Ledru01/19/2023
Very great purchase been using it the past year
by: John 04/04/2024
by: Jerry11/04/2021
does will
by: Corbett01/09/2021
Great service and selection. Package arrived on time.
by: Bryce 04/01/2024
by: Alan 09/14/2023
by: Russell 11/26/2021
by: Donald 01/24/2022
by: Kenneth 03/20/2023
by: Ronald 08/20/2023
by: David 08/11/2023
by: Timothy 01/22/2023
by: Joseph 02/10/2023
by: Dianne 02/24/2023
by: Larry 01/19/2022
by: Jeremey R.04/26/2024
First, this bar is extremely heavy, which makes transporting and maneuvering cumbersome and difficult. Secondly, I had issues with this unit from the get-go. I did not receive the correct bolts to attach the Roadmaster clevis to the arm ends. The instructions clearly state that a clevis bolt was to be installed with the XHD unit, but it was not in the hardware bag. I had to call customer service (which was so/so, almost like the person didn't believe me) and had the bolts sent to me. I received the bolts but long story short, they were too short. They did not come out of the bottom of the locknut and any attempt to torque them to the point they did protrude, caused the forks of the clevis to bend, which is too much stress on such an important piece. I did not feel it was safe to either have the bolts not protrude, or force them to protrude. Then came the days-long process of trying to rectify the situation. I called customer service and attempted to explain the problem to the rep. She didn't really want to hear my problem and I was quickly rushed off the phone and directed to call Roadmaster for support, which I did. Roadmaster, of course, has nothing to do with this bar, or problem (pictures were sent to RM) and I was directed to call eTrailer back. I spoke to another person and she was a little more helpful. However, during our "conversation," I could hardly get a word in (I was spoken over and interrupted constantly.) I was told that #1.) the first person I talked to had no idea what she was talking about #2.) Demco manufactures these parts, not Roadmaster, #3.) Essentially the correct length bolts don't exist in the parts catalog. At this point I am starting to get upset with my experience and just wanted a tow bar that worked. I was convinced to but a Roadmaster branded tow bar to avoid any more issues (Blackhawk All Terrain) which I found to be strange, I figured the margin on the eTrailer branded products would be higher, but I digress. Since there is no exchange program with eTrailer, I had to purchase the Blackhawk outright. I was given a UPS label to send the XHD back, but I had to wait to receive the Blackhawk to reuse the box, which is not a huge deal, a minor inconvenience at this point. As of today (4/26/24) I am still waiting for a refund on this unit which I was assured it would be on it's way once the tracking number showed that it was picked up by UPS, but this is not the case. In conclusion, the XHD seemed like it would be a decent product if they can get the hardware right (at least for the Roadmaster system) it's just heavier than most tow bars I have had experience with. eTrailer.com customer service can also use some work, I was not happy with the service after the sale I received. Oh, and the final kick in the tail, the Blackhawk does not come with safety cables. If this were my company, I would have thrown those in for the inconvenience, but I was offered nothing for the trouble this has caused, no discount on the Blackhawk, cables or anything. I will do all I can to avoid buying from etrailer again and will direct others to the same.
by: Tony02/04/2023
1st tow bar I had to send back, due to chip powder coating. 2nd two bar came a week later Great job etrailer. It was easy to do a return and get a replacement. etrailers whole team was great getting me what I wanted. I replaced a 10-year-old tow bar and wanted to replace it with their new XHD you can tell its LBS is higher than my old tow bar.
by: Larry04/27/2023
etrailer has been just what I need it as a first time tower of a Rv tow car there experience and courtesy of helping someone with no experience has been a huge relief with something so important there help was invaluable all the way through Thank you so much
by: Edward10/27/2023
The tow bar looks good. However, it was missing the large bolts to hold the blue ox adapters onto the tow bar. The hardware kit was not complete. Also, the instructions on attaching the blue ox adapters were NOT CLEAR at all. I think the bar will be very good once I get the missing parts shipped to me.
25
114
Show More Reviews
See what our Experts say about this etrailer Tow Bar
- Correct Base Plate Kit for etrailer XHD Tow Bar On a 2020 Jeep GladiatorYes, the etrailer Invisible Base Plate Kit part # e98967 will allow you to use the etrailer XHD Non-Binding Tow Bar part # e94ZR which are both excellent options on a 2020 Jeep Gladiator. .
view full answer... - Connecting etrailer XHD Tow Bar to etrailer Base Plate Kit e98949 on 2017 Jeep Wrangler UnlimitedWe can help you out here as the instructions can be confusing. So when attaching the etrailer XHD Non-Binding Tow Bar # e94ZR to the etrailer Invisible Base Plate Kit # e98949 the hardware used are the pair of 1/2” bolts, four 1/2” poly washers and two 1/2” lock nuts. You will indeed use two poly washers on each side, between the tow bar shaft and clevis. and it is okay to be loose inside of the tab. In fact, that is preferred as you do want there to be some rotation allowed on the tow...
view full answer...
- Recommended Base Plate And Tow Bar For A 2023 Jeep GladiatorFor your 2023 Jeep Gladiator I recommend the etrailer Invisible Base Plate Kit # e98948 and the etrailer XHD Non-Binding Tow Bar # e94ZR. This is our etrailer brand, which is made for us by Demco, so you know you are getting a solid, U.S. made product. The base plate features removable arms, so nothing will be protruding from the front of the car when not in use. The tow bar is an extremely solid non-binding tow bar rated for 10,500 lbs. It also includes a pair of integrated safety cables. I...
view full answer... - What is the Towing Capacity Of The etrailer Invisible Base Plate Kit # e98948? The etrailer Invisible Base Plate Kit # e98948 is rated for up to the GVWR of your Jeep Wrangler. As this is also compatible with the Unlimited Wrangler it will have been tested for up to 6,100lbs. Be sure to use the etrailer XHD Non-Binding Tow Bar # e94ZR as it is rated for more than the maximum GVWR of your Wrangler.
view full answer... - 2023 Ford F-150 Base Plate Kit RecommendationI really like our etrailer Invisible Base Plate Kit # e86YR for your 2023 Ford F-150 because it has a really clean looking installation and it pairs up nicely with our etrailer XHD Non-Binding Tow Bar # e94ZR that has an easy latching system and an adjustable head to minimize the need for a high-low adapter. Attached are some videos of these parts for you to check out. For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental...
view full answer... - Are Replacement Safety Cables Available for etrailer XHD Non-Binding Tow Bar # e94ZRReplacement safety cables are available for the etrailer XHD Non-Binding Tow Bar # e94ZR with the Demco Straight Safety Cables # DM9523055 which are 64 inch long straight safety cables.
view full answer... - Does Roadmaster D-Ring Adapter # RM-035 Fit etrailer Tow Bar # e94ZRHey Michael, yes the D-Ring Adapter part # RM-035 does fit the etrailer XHD Non-Binding Tow Bar # e94ZR.
view full answer... - How To Use etrailer XHD Non-Binding Tow Bar With Blue Ox Base PlatesYes, the etrailer XHD Non-Binding Tow Bar part # e94ZR can be used with Blue Ox base plates if you obtain the Demco Tow Bar Adapter for Blue Ox Base Plates part # DM9523041. This adapter installs on the end of a Demco or etrailer tow bar and allows you to hook-up to Blue Ox base plates.
view full answer... - What Tow Bar is Compatible With etrailer Invisible Base Plates for a 2020 Jeep Wrangler The etrailer Invisible Base Plate Kit - Removable Arms # e98948 is compatible with all of our etrailer branded tow bars like the SD # e34ZR or XHD # e94ZR, which both come with safety cables included. These base plates are also compatible with Demco Victory series tow bars like the # DM9511008 or several Roadmaster tow bars. However, you could also get a base plate adapter and potentially use them with another tow bar if you've got one that isn't listed on the product page. I've linked...
view full answer... - How To Use etrailer XHD Non-Binding Tow Bar On 2020 Ford F-250 Super DutyI recommend the etrailer XHD Non-Binding Tow Bar part # e94ZR for a 2020 Ford F-250 Super Duty which can then be used with the Demco Classic Base Plate Kit part # DM68FR. The etrailer XHD Non-Binding Tow Bar for Reese or Valley Base Plates part # e97ZR won't work as Reese nor Valley (No Longer In Business) no long makes base pates.
view full answer... - Weight Capacity of Demco Base Plates for a 2020 Ford F-350The Demco Classic Base Plate Kit part # DM68FR which is a fit for a 2020 Ford F-350 does not have a listed weight capacity as is the case with all base plate kits. They will be suitable for handing the weight of the vehicle and then some without issue. In regards to a tow bar, the highest rated compatible option we have is the etrailer XHD Non-Binding Tow Bar part # e94ZR which will be plenty since the curb weight of said vehicle is between 5,878 and 7,737 lbs.
view full answer... - Replacement Release Handle For Item # e94ZRThe replacement release handle for the etrailer XHD Non-Binding Tow Bar Item # e94ZR is Item # DM46FR.
view full answer... - Parts Needed to Flat-Tow a 2013 Ram 1500 OutdoorsmanIn order to flat-tow a 2013 Ram 1500 you'll need a base plate kit, tow bar, safety cables, flat-tow wiring harness, and a supplemental braking system. I have attached a list with each of these parts for you below. etrailer Classic Base Plate Kit part # e98945 etrailer XHD Non-Binding Tow Bar part # e94ZR Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 Brake Buddy Select 3 Portable Supplemental Braking System part # HM39524
view full answer... - Parts Needed to Flat Tow 2021 Jeep Wrangler With Class A Motorhome With Air BrakesCertainly, for your 2021 Jeep Wrangler, to flat tow behind a motorhome with air brakes properly and safely requires at least 5 components: 1) Base plate kit installed on the towed vehicle 2) Tow bar making the connection to tow vehicle and vehicle being towed 3) Safety cables in case the tow bar fails (some tow bars come with this added item) 4) Wiring to synchronize your RV’s indicator lights and the towed vehicles lights 5) Supplemental braking system to synchronize your RV’s brakes...
view full answer... - Recommended Base Plate Kit for a 2023 Jeep Wrangler Unlimited High Tide/Beach ModelsIt looks like the 2023 Jeep Wrangler Unlimited High Tide/Beach Models use the same bumper as the other models so the etrailer Invisible Base Plate Kit part # e98948 should be just what you need. In order to complete your setup you'll also need a tow bar, safety cables, flat-tow wiring harness, and braking system. I have attached a list of these parts below. etrailer XHD Non-Binding Tow Bar part # e94ZR Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 Brake Buddy...
view full answer... - What Is The Easiest Set-Up To Flat Tow 2004 Jeep Wrangler Behind 2021 Dynamax IsataWe have everything you need to easily set up your 2004 Jeep Wrangler for flat towing. You are looking at five primary components for a safe flat towing setup; a base plate kit, a tow bar, safety cables, tow bar wiring, and a supplemental braking system. - Base Plate, etrailer Invisible Base Plate Kit, # e98946 (with factory bumper.) - Tow Bar, etrailer SD Non-Binding Tow Bar - 6,000 lbs., # e34ZR (This includes the needed safety cables.) - Wiring Solution, Hopkins Custom Tail Light Wiring...
view full answer... - Parts Needed to Flat-Tow a 2002 Jeep LibertyIn order to flat-tow a 2002 Jeep Liberty you'll need a few different items such as a base plate kit, tow bar, safety cables, lighting harness, and supplemental braking system. I have attached a list with each of these parts for you below. etrailer Classic Base Plate Kit part # e98970 etrailer XHD Non-Binding Tow Bar part # e94ZR Demco 4-Diode Universal Towed Vehicle Wiring Kit part # DM9523010-54 Brake Buddy Select 3 Portable Supplemental Braking System part # HM39524 This is a complete...
view full answer... - Tow Bar Recommendation for etrailer Base Plate Kit on 2021 Ram 1500 ClassicThe tow bar that I recommend using with the etrailer Classic Base Plate Kit # e98945 on your 2021 Ram 1500 Classic is the etrailer XHD Tow Bar # e94ZR because it has a higher weight capacity at 10,500 lbs over the 6,000 lb rating of the etrailer SD Tow Bar # e34ZR. Technically the 6K tow bar will be sufficient for your truck, but from what I was seeing online your truck can weigh up to about 5,300 lbs without anything in it so I like to have a higher weight margin. To finish out your towing...
view full answer... - Will Portable Braking System Drain Battery on 2021 Jeep Gladiator When Flat TowingA portable braking system won't drain the battery in your 2021 Jeep Gladiator so long as you go with a specific system: - Brake Buddy Select 3 Portable Supplemental Braking System # HM39524 The Brake Buddy Select 3 does plug into your Gladiator's 12 volt outlet, however this system is different than others because it comes with a 15 amp charger that will run to the 6-way wiring connector at the front of your Jeep, and when it is plugged into your motorhome's connector, it will constantly...
view full answer... - Confirmed Parts Needed to Flat Tow 2020 Jeep Wrangler Unlimited With Motorhome With Air BrakesI'd be happy to help you confirm the parts you need to flat tow your 2020 Jeep Wrangler Unlimited with the factory plastic bumper behind your Jayco Seneca with air brakes. - Base Plate Kit: etrailer Invisible Base Plate Kit # e98948 - Tow Bar: etrailer XHD Non-Binding Tow Bar # e94ZR - Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 - Supplemental Braking System: Demco SBS Air Force One Supplemental Braking System for Motorhomes with Air Brakes # SM99243 So...
view full answer... - All Parts Needed to Flat Tow 2018 Jeep Wrangler JK Unlimited Sahara With Standard BumperAlong with a wiring loom there are a number of different parts that are needed in order to flat tow your 2018 Jeep Wrangler Unlimited JK Sahara with a standard factory bumper, which I'll list for you to make it a little simpler: - Base Plate Kit: etrailer Invisible Base Plate Kit # e98949 - Tow Bar: etrailer XHD Non-Binding Tow Bar # e94ZR - Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 - Supplemental Braking System: Stay-IN-Play DUO Supplemental Braking...
view full answer... - Will The etrailer Invisible Base Plate e98966 Fit a 2021 Chevrolet Colorado ZR2Yes, the etrailer Invisible Base Plate Kit # e98966 will fit your 2021 Chevrolet Colorado ZR2. Here is a list of the other components you will also need for flat towing your Colorado if you do not already have everything picked out. etrailer XHD Non-Binding Tow Bar # e94ZR Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 Brake Buddy Select 3 Portable Supplemental Braking System # HM39524 Roadmaster Automatic Battery Disconnect # RM-766
view full answer... - How To Do Maintenance On etrailer XHD Non-Binding Tow Bar I have attached for you below the maintenance procedures for the etrailer XHD Non-Binding Tow Bar part # e94ZR as outlined in the owner's manual. In order to preform this maintenance I recommend using the Roadmaster Tow Bar Cleaner part # RM-9932 and Roadmaster LubeMaster Dry Silicone Spray part # RM-747. - Periodically check all bolts and nuts to ensure proper tension or torque. - Check all pivot points for wear or breakage. - Replace any worn or damaged parts with O.E.M. parts only. -...
view full answer... - Recommended Flat Towing Set Up for a 2012 GMC Sierra 2500 I would be happy to help you set your 2012 GMC Sierra 2500HD up for flat towing. I total understand there are a lot of options and the manufacturer's parts sometimes do not like to work together. To flat tow your Sierra you will need the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar - item # e94ZR Base Plate Kit - Demco Classic Base Plate Kit - Fixed Arms item # DM9517321 Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Supplemental...
view full answer...
Do you have a question about this Tow Bar?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Jonathan Y
Video by:
Chris R
Updated by:
Wilson B
Updated by:
Michael B
Updated by:
Noah M
Updated by:
Amanda K
Test Fit:
Conner L
Test Fit:
Clayton O
Test Fit:
Bradley B
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.