What Is The Easiest Set-Up To Flat Tow 2004 Jeep Wrangler Behind 2021 Dynamax Isata  

Question:

Expert Reply:

We have everything you need to easily set up your 2004 Jeep Wrangler for flat towing. You are looking at five primary components for a safe flat towing setup; a base plate kit, a tow bar, safety cables, tow bar wiring, and a supplemental braking system.

- Base Plate, etrailer Invisible Base Plate Kit, # e98946 (with factory bumper.)

- Tow Bar, etrailer SD Non-Binding Tow Bar - 6,000 lbs., # e34ZR (This includes the needed safety cables.)

- Wiring Solution, Hopkins Custom Tail Light Wiring Kit for Towed Vehicles, # HM56202 along with, Brake-Lite Relay Kit, # RM-88400

- supplemental Braking, Brake Buddy Stealth Supplemental Braking System, # HM39530

The etrailer Invisible Base Plate Kit, # e98946 is compatible with all etrailer, Demco, and Blue Ox tow bars plus there are adapters sold separately that allow for use with Roadmaster and Sterling tow bars.

The etrailer SD Non-Binding Tow Bar, # e34ZR is rated for 6K which is more than enough for a 2004 Jeep Wrangler but you prefer, there is the higher rated etrailer XHD Non-Binding Tow Bar, # e94ZR rated at 10,500 lbs.

What I really like about the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles, # HM56202 is its ease of installation, it's a plug-in harness. There are no wires to be cut and spliced and we have an installation video created of this being installed on a 2004 Jeep Wrangler. Please note the link below.

I've included the Roadmaster Brake-Lite Relay Kit for Towed Vehicles, # RM-88400 as this kit is to prevent your Jeep's brake signal from overriding the turn signal that comes from your motorhome.

I recommend the Brake Buddy Stealth Supplemental Braking System, # HM39530 that a fixed, semi-permanent installation but this has the advantage of being a direct plug in to the recommended wiring harness, # HM56202. This too has an video of being installed on 2007 Jeep.

expert reply by: Michael R

0