Yakima BaseLine Roof Rack for Naked Roofs - JetStream Crossbars - Aluminum - Black - Qty 2
(199 reviews)
Price: $688.80
In Stock
Yakima BaseLine Roof Rack for Naked Roofs - JetStream Crossbars - Aluminum - Black - Qty 2
Item # Y23AB
Our Price: $688.80
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (199)
- Q & A (0)
- Videos (68)
- Photos
Yakima Roof Rack - Y23AB
- Aero Bars
- Crossbars
- 60 Inch Bar Space
- Yakima
- Black
- Overhang
- 2 Bars
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima JetStream Crossbars - 60" Long - Black - Qty 2:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Black powder coat finish is corrosion resistant
Yakima BaseClip 152:
- Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
- Padded, stainless steel clips provide secure grip on your door jambs
- Snap onto DropHooks inside towers
- Protect door jambs from scratches and abrasions
- Powder coated for durability and rust resistance
- Molded rubber pads fit the contours of your roof
- Clip onto bottoms of towers
- Protect roof from scratches and abrasions
Yakima BaseClip 163:
- Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
- Padded, stainless steel clips provide secure grip on your door jambs
- Snap onto DropHooks inside towers
- Protect door jambs from scratches and abrasions
- Powder coated for durability and rust resistance
- Molded rubber pads fit the contours of your roof
- Clip onto bottoms of towers
- Protect roof from scratches and abrasions
Yakima BaseLine Towers - Qty 4:
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with a naked roof
- Pair with 2 Yakima crossbars and BaseClips to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Pivoting bases can be adjusted during installation to ensure towers are seated correctly
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Safe and easy installation with DropHook system and included torque tool
- DropHook clip holder adjusts on 3 axes for perfect fit on your naked roof
- BaseClips attach to hooks in tower assemblies and tighten for a secure grip
- Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction with matte finish
8000426 Yakima Jet Stream Cross Bars - Aluminum - 60" Long - Qty 2 - Black
8006152 Custom Base Clips and Pads for Yakima Base Line Towers
8006163 Custom Base Clips and Pads for Yakima Base Line Towers
8000162 Yakima Base Line Towers for CoreBar, JetStream, and RoundBar Cross Bars - Bare Roofs - Qty 4
Replaces 8000146
Video of Yakima BaseLine Roof Rack for Naked Roofs - JetStream Crossbars - Aluminum - Black - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima BaseLine Roof Rack Towers BaseClip Fit Kit Review
Hi, everyone, Aidan here with etrailer. Today, we're gonna be taking a look at the Yakima BaseClip Fit Kit for your Yakima BaseLine FX Roof Rack Kits. Now, this is gonna be the rubber pad and the clamps that actually hold the whole roof rack system in place and make it a custom fit for your various different vehicles. Now, that being said, there's tons of different kits out there on our website for different vehicles, all of those pads are gonna be molded somewhat differently to adapt to different roof shapes, so do plug in your vehicle information into our fit guide and find the right fit kit for you and your vehicle, but it's gonna be a look at the overall system, how it works, and how it functions with the roof rack. So the main two parts of this are gonna be the rubber pad and the clamp, but let's talk about that rubber pad first. It's gonna be custom molded to your vehicle, so you can see really well right here on this lip, it forms around that ridge on the roof and fits snugly into place there to make sure that nothing is moving around and it's fit custom to that area.
Now, the base of that fit kit is what actually clips into the tower here and serves as the connection point between the crossbar roof rack system and your vehicle. That rubber base to it is going to give you the maximum protection and make sure that you're not scratching or scuffing any paint on your roof, and it keeps things nice and sealed up. Now, the stainless steel clip is what also helps to secure it to our roof, that's gonna be the second main component. It's a stainless steel construction and a black powder coat finish, the finish helps it match the whole roof rack system, but it all helps it resists rust and corrosion. Now, the inside of those clips are gonna have a rubber padding, again, so there's no metal on metal contact with our paint or anything, and then you can see here, it's custom fit, hooking inside our door jam, and whenever I close the door, it'll just fit right around there, making sure that it's a nice custom fit.
It attaches up inside the tower right up through here, and it just tightens down, hooking into a slotted opening hole, and then that's what gets it all secured and what helps it join into the tower system. These fit kits come in pairs, one for the passenger's side and one for the driver's side. Now, the reason they do that is because depending on your vehicle, you're probably gonna have a different fit kit for the front and rear. Yakima does a lot of research and development into making sure it's a custom fit for the vehicle, and the one we have it on here today, the Honda Civic, is a perfect example. You can even visually see how much longer the clamp at the back is compared to this clamp up at the front.
So clearly, we're gonna need a different kit for the front end, because there's just less distance for that clamp to travel. So again, plug in your vehicle information to our fit guide, make sure you find the right kits for you, and make sure that you also have the right set for the front and rear. But that's really all there is to it. The BaseClip system is gonna work really well in tandem with that BaseLine roof rack system, and it's really just coming down to making sure you get the right fit for your vehicle, because without that fit kit, you don't have a roof rack. But that'll do it for our look at these BaseClip Fit Kits for your Yakima BaseLine Roof Rack Systems.
Thanks for watching.
Customer Reviews
Yakima BaseLine Roof Rack for Naked Roofs - JetStream Crossbars - Aluminum - Black - Qty 2 - Y23AB
Average Customer Rating: 4.7 out of 5 stars (199 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: TimN03/19/2024
Chevrolet Silverado
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.
by: Dave02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
by: 04/01/2024
Follow the instructions, and you can't go wrong on the self installation
by: Frank02/10/2023
Ford Edge
Not a bad setup. I dont believe you need the 60" bars i received as they hang over the edge of your Hyundai. You need to watch your head getting in and out of your vehicle. The Jetstream crossbars are very loud at speeds over 65 mph. Im probably used to it by now, but it is definitely noticeable. Much louder than an older Rhino Rack of similar dimensions i had. Install was simple and took about 30 minutes, just take your time and measure correctly like all roof racks.
by: Todd06/24/2023
Really easy to install & work as specified. So happy with the customer support/service at etrailer.
by: John 09/06/2023
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.
by: Bob L11/30/2023
product was just what I needed The folks at etrailer were extremely helpufl!!
by: DogDoc04/12/2024
Ford Expedition
Easy to install. It probably took 45min. I bought them for my 2024 Expedition to haul a canoe. I have not done that yet but I expect no issues.
by: Paul08/16/2023
Ackage came 2 days early the install was somewhat easy (did it by myself)
Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.
by: Elliott08/04/2018
2015 Jeep Grand Cherokee
I have a 2015 Jeep Grand Cherokee SRT which has the non-functional roof side bars. Etrailer.com helped me figure this out and gave me several options that would work. As I already have Yakima bike racks - I wanted to stick with the brand. The price on etrailer.com was the same as Yakima but had free shipping and no tax - awesome. Product arrived quickly!
I went with the Yakima 60" Jetstream cross bars, baseline towers, and the appropriate pads and clips.
The Yakima product came with thorough and easy to understand instructions. I was able to get the track installed and working in about an hour - and that was taking it slow and double checking everything. I was very pleased with the fit and finish.
After a test run, there was no wind noise or issue with the rack. Looking forward to taking a road trip next month with it!
by: Rod12/05/2021
2010 Jeep Grand Cherokee
Product exactly as expected. Quality bars. Using on a 2021 Jeep Grand Cherokee L. Looks great installed. Little to no wind noise. And, as usual, top notch service by the etrailer crew! Have purchased several items from etrailer over the past 10 years and have always been impressed by how timely they are and how responsive and helpful they have been regarding product questions. They are absolutely the first merchant I go to when shopping on line!
by: John 08/31/2017
2015 Ford Fusion
The Yakima rack system for my 2015 Ford Fusion is an awesome product! I hadn't needed to buy aftermarket racks in many years. These are a super solid, beefy, and very well made product. I am very impressed with the quality and fit. Yakima has obviously put lots of design time into them. And etrailer does an outstanding job of making sure you get the right product for your specific need.
I chose this rack specifically because of the spread between the bars - 32" - and for the higher weight limit, as I'm carrying a fishing kayak.
by: Ian 07/02/2023
Mazda
Solid build quality and easy installation on my '21 Mazda CX-5.
by: Richard R02/20/2023
GMC Canyon
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.
by: 10/06/2023
Love it! We've made several long trips with full luggage loads.
by: Roland01/08/2024
Well packaged and on time
by: Andrew04/04/2023
Easy to order and quick to ship. Took a bit of time to get these installed correctly so they fit just right.
by: Joseph08/23/2021
Pontiac Trans Sport Van
1 year later and still love my Yakima JetStream system. I've mostly used them to transport my kayak however I've also been able to transport some big box store items as well. They are very versatile. There is a t-track option as well as wrap around attachments. I've use ladder attachments, eyebolts, and Thule Hullavator in t-track. I've used Malone MegaWing and Yakima Skybox as wrap around attachment. What I really like about the t-track system is that you do not need to cut out the rubber track insert. You simply slide over the rubber, which allows you to adjust your system, on the fly, to load what you need to carry.
by: Chad12/07/2018
Excellent product. These bars are very quiet and look great on our truck. Assembly and installation was straightforward. We've used these bars to secure our large Yakima car top carrier and have traveled on several trips to the mountains and cabin with no issues. I suggest ordering an extra set of end caps as we've lost one in the car wash. However, have had no problems with the bars when going through the car wash.
As always, I GREATLY appreciate the superior product support that etrailer.com provides. They have the best product content on the web, hands down.
by: Leslie 02/10/2023
Roof rack parts were ordered correctly and shipped quickly.
by: Moparnut22808/20/2023
Great product fast shipping
by: Andrew08/01/2023
Great! Easy to install!
by: Daryl04/29/2020
Jeep Cherokee
These Yakima crossbars are a part of the Yakima towers I bought to install on my Jeep Cherokee to hold a pair of Kayaks. They fit great as advertised. In fact I got these discounted as an open box. I would have never known, they look brand new. Thank you etrailer for your great advice, customer service and quick shipping process.
by: Robert 01/06/2022
The bars are sturdy, aerodynamic and super strong. I bought this to fit a Yakima Skybox 16 and these worked great. The measurement ticks on the bottom assist with getting the box centered and have a great gasket system that you fit yourself. These mounted pretty quick even in 20 degree weather.
etrailer sold this as a set based on my car and every piece was great and a perfect fit. Communication and tracking info was great and they delivered it a day before promised.
by: Joao07/18/2023
Great service and great staff. They will have all the technical information you need.
25
786
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
view full answer... - Lowest Profile Roof Rack For 2021 Hyundai PalisadeIt depends on what kind of roof you have on your 2021 Hyundai Palisade. If you have the the raised side rails you can use this kit that uses the Yakima Jetstream Crossbars # Y00425 The Ridgeline Towers # Y00145 and the ridgeclip # Y89FR. This leaves about an inch or so from where your sunroof is when it's open. If you have a naked roof, you can get these crossbars # Y00426, baseline towers # Y28TR and these two baseclip kits # Y06145 and # Y06138. This will be just above your sunroof when...
view full answer... - Roof Rack Recommendation for 2019 Chevy Traverse with Raised Rails for Installing Cargo BoxSounds like you are looking for a roof rack that fits your 2019 Chevy Traverse and is tall enough to allow the install of a cargo box. For that you'd have to go with the Yakima # Y00426 and # Y33TR for a rack tall enough. I checked with Yakima about the Yakima RocketBox Pro 14 # Y07192 that you referenced also and it is a confirmed fit for your 2019 Chevy Traverse with factory crossbars.
view full answer... - Roof Rack Recommendation for A 2016 Ford EdgeYes, the Rhino-Rack # RR26XR is designed to fit a 2016 Ford Edge that does not have factory rails installed. The Rhino-Rack system flush mount design attaches to the inside of the door frames of your Edge. This allows for no over hang and improves the aerodynamics of the the bars. The sturdy aluminum construction of the bars allows for a maximum weight capacity 165lbs for the roof rack. Yakima has the JetStream Cross Bar System # Y00426, # Y28TR, # Y06102, and # Y06139 that will fit your...
view full answer... - Roof Rack and Kayak Carrier for a 2017 Ford F-150 with Panoramic RoofYakima has a roof rack option that will fit models of the 2017 Ford F-150 that have the panoramic roof. Keep in mind though they state not to open a sunroof or panoramic roof because they may interfere with some accessories. If you have a Super Crew Cab or SuperCab you can use bars # Y00426, BaseLine towers # Y28TR, and 2 sets of clips # Y06122. There isn't an option for the regular cab (if the panoramic roof was even an option for the regular cab models). A popular kayak carrier that...
view full answer... - Parts Needed to Add Yakima Roof Rack to Leer Topper with Thule TracksYakima Landing Pad 1 part # Y00221 fits the Thule channels that you have on your Leer camper shell. This is a pair of them so you'd need a quantity of 2. Then for a pair of feet you'd need the SkyLine Towers part # Y72TR. Yakima does not make square bars though so you'd want a set of their JetStream bars part # Y00426 which are 60 inches long. To then add locks you'd need the lock core pair part # Y07202.
view full answer... - Recommended Yakima Roof Rack For A 2024 Ford EscapeWe can definitely set you up with a Yakima roof rack for your 2024 Ford Escape with a naked roof. I recommend the Yakima JetStream bar setup. The full roof rack will consist of the following parts: Crossbars - 60' Yakima JetStream # Y00426 Towers - Yakima Baseline Towers # Y28TR BaseClip Fit Kit # Y06137 BaseClip Fit Kit # Y06152 I prefer the JetStream bars over others because the aerodynamic shape will minimize drag and road noise. The Aero Bar shape is basically universal, and you...
view full answer... - Can 2018 Chevy Silverado 1500 Yakima JetStream Roof Rack Hold a Roof Top TentAs long as the roof top tent manufacturer lists the tent as being compatible with a roof rack that has a weight rating of 165 lbs that clamps to the door jambs then yes, the Yakima JetStream System for your 2018 Chevy Silverado 1500 (parts linked below) will work with your setup! The reason I say to check with the instructions of the roof top tent manufacturer is because they all have slightly different requirements for fitment. For example, the Yakima roof top tents say not to use their...
view full answer... - Recommended Roof Rack for a 2024 Acura MDX w/ No RailsI would be happy to help you! To add a roof rack to your 2024 Acura MDX, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178
view full answer... - Correct Yakima Towers for a 2023 Toyota Sequoia The towers compatible with your 2023 Toyota Sequoia is going to be those TimberLine Towers for Yakima Crossbars # Y33TR. These towers will work with Yakima's JetStream # Y00426, HD # Y01157, CoreBar # Y00422, and RoundBars # Y00409.
view full answer... - Roof Rack Options For Hauling Two Kayaks On A 2022 Subaru Forester Saddles/racks typically have some sort of cushion or rubber to help prevent sliding and offer multiple tie-down points so they are typically better than just laying the kayak onto the crossbar. The Malone AirFlow2 Roof Rack # MPG215 has 50" crossbars. If you subtract 34" from that you're left with 16" which is a bit smaller that most J-Style kayak carriers so you'd likely not have enough room. Since the Malone # MAL98FR angles up you might be able to clear the fishing kayak, but this would...
view full answer... - Recommended Roof Rack System For A 2022 Mercedes GLS Hauling Multiple KayaksSince you're wanting to go with crossbars longer than what any manufacturer has designed for your 2022 Mercedes GLS you'll need to go with a Yakima system since they're the only ones with a mounting track that runs the entire length of the crossbar. There's a bit of gap in options between 60" and 70" so you'd have to either go with the Yakima JetStream Crossbars - 60" Long # Y00426 or two of the 70" # 8880650. To connect the crossbars to the factory rails on your GLS you'll need the TimberLine...
view full answer... - Recommended Roof Rack to Carry 3 Kayaks with a 2017 VolksWagen Golf SportWagenBoth Thule and Yakima produce great products, so I recommend going with a Yakima roof rack for your 2017 Volkswagen Golf SportWagen since that is what you are familiar with. The recommended JetStream roof rack system for your SportWagen includes 50 inch Crossbars # Y00425, the TimberLine Towers # Y33TR, and SKS Lock Cores # Y07204. This system has a weight capacity of 165 lbs so you will want to keep that in mind when loading your kayaks. Since you said that you were needing at least...
view full answer... - Recommended Roof Rack for a 2022 GMC Yukon XLYes, we do. The best roof rack for your 2022 GMC Yukon XL is going to be the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV This roof rack will attach directly to your Yukon's flush side rails. It has a 165 lbs capacity. I have linked an...
view full answer...
- Mounting 60 Crossbars on My 2017 Honda Pilot with Flush Factory RailsYes, it is definitely possible. For a 60" crossbar system on your flush rails on your 2017 Honda Pilot, you need the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 60" Long # Y00426 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR - Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 # Y00245 - Yakima Same-Key Lock Cores # Y07204 As far as fitment, there will be no issues with this system fitting your vehicle....
view full answer... - How Wide of a Boat Can Be Used with the Yakima ShowDown Y04081The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs part # Y04081 can accommodate boats up to 28" wide with the kayak saddles and boats up to 36" wide with the paddle board saddles, both saddles are included. In order to secure your paddles you can use the Yakima TopGrip Paddle, Shovel, or Axe Holder Bracket part # Y04086. We also have an option to add locks, the Yakima Same Key System part # Y07202. For a roof rack that is a fit for your 2018 Jeep JL Wrangler Unlimited...
view full answer... - Can 60 Inch Long Yakima Y00426 JetStream Crossbars Be Used on a 2017 Subaru ForesterYou can certainly use a 60 inch long crossbar such as the Yakima # Y00426 JetStream. In order to attach the crossbar to your current roof rails, you'll also need the # Y33TR Yakima TimberLine towers. If you click the provided link, you can see a similar rack (same roof rack with 50 inch crossbars) being installed on a 2017 Forester like yours.
view full answer... - Compatibility of the Yakima # Y00426 and # Y33TR with Sunroof on a 2021 Ford Bronco SportWhile we do not know the exact height of the raised rails of your 2021 Ford Bronco Sport Badlands, there is a way to gain a strong approximation of whether the Yakima JetStream Crossbars - Black - 60" Long # Y00426 along with the TimberLine Towers for Yakima Crossbars # Y33TR allow you to open the sunroof on your vehicle. From the bottom of your roof to the bottom of the JetStream crossbars is about 4 inches tall. In order to determine if you have enough room, I recommend opening your...
view full answer... - Recommended Roof Rack System For 2015 Mazda 3 For a Roof Top TentI would be happy to recommend a roof rack for your 2014 Mazda 3 5 Door Hatchback for carrying a 165lb Roofnest Rooftop Tent. If your Mazda 3 has fixed mounting points on the roof I recommend the Yakima Roof Rack System which uses 50" Yakima JetStream Crossbars # Y00425, SkyLine Towers for Yakima Crossbars # Y53TR, and Landing Pads # Y00248. If your Mazda 3 does NOT have fixed mounting points then I recommend the Yakima Roof Rack System which uses 60" Yakima JetStream Crossbars - Aluminum...
view full answer... - Recommended Roof Rack for 2019 VW Atlas With Raised Side RailsFor your 2019 VW Atlas with raised side rails I highly recommend going with an option from Yakima, which consists of the Yakima Jetstream Crossbars # Y00426 and TimberLine Towers for Yakima Crossbars # Y33TR. This will give you a roof rack which not only looks great but uses aero bars with ridges that helps give you a very quiet ride. The bars are 60" long to fit the width of your Atlas and have T-slots which will allow you to use channel-mounting accessories. I also recommend using SKS...
view full answer... - Recommended Aero-Style Roof Rack for a 2018 Mazda 3I recommend going with the Yakima JetStream roof rack system for your 2018 Mazda 3. These are aero-style bars that are made of aluminum so they are not only lightweight but they also have excellent corrosion resistance. The reason that I like the JetStream bars over other aero bars is that they are designed so that you don't have to remove or cut the rubber strips on the top and bottom which help cut down on the wind noise. If you have the fixed mounting points on your roof then you need...
view full answer...
- Roof Rack Recommendation for 2020 Kia Telluride with SunroofYes, we have just what you need to carry your Yakima Skybox NX 16 # Y95AV on the roof of your 2020 Kia Telluride. Your best option is the 60-inch Yakima JetStream Crossbars # Y00426. Along with that, you'll also need the Yakima Baseline Towers # Y28TR and the custom BaseClip/Pads # Y06125 for the front and # Y06165 for the back. The JetStream bars are made of a rust proof aluminum and have the most aerodynamic and quiet design available. The Baseline Towers provide an attachment point...
view full answer... - Yakima Roof Rack that Fits 2018 Ford F-150 Supercrew with Panoramic RoofYakima has their Jetstream roof rack for your 2018 Ford F-150 Supercrew with the part numbers # Y00426, # Y28TR, and # Y06122 which I attached an install picture of on a truck with a panoramic roof just like yours.
view full answer...
- How To Carry Skis and Snowboards on a 2017 Lexus NX 200t With Flush Side RailsSo long as you have flush side rails on your 2017 Lexus NX 200t then I do have options for you to carry both your three snowboards and a pair of skis. For the roof rack, I recommend using the Yakima JetStream Crossbar System which is composed of part # Y00426, part # Y64AR, and part # Y59AR. The JetStream system has aero crossbars for reduced wind noise and integrated channels for use with channel mounted accessories. For a roof rack mounted ski carrier, I recommend the Yakima FatCat...
view full answer... - Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
view full answer... - Lowest Profile Roof Rack For 2021 Hyundai PalisadeIt depends on what kind of roof you have on your 2021 Hyundai Palisade. If you have the the raised side rails you can use this kit that uses the Yakima Jetstream Crossbars # Y00425 The Ridgeline Towers # Y00145 and the ridgeclip # Y89FR. This leaves about an inch or so from where your sunroof is when it's open. If you have a naked roof, you can get these crossbars # Y00426, baseline towers # Y28TR and these two baseclip kits # Y06145 and # Y06138. This will be just above your sunroof when...
view full answer... - Roof Rack Recommendation for A 2016 Ford EdgeYes, the Rhino-Rack # RR26XR is designed to fit a 2016 Ford Edge that does not have factory rails installed. The Rhino-Rack system flush mount design attaches to the inside of the door frames of your Edge. This allows for no over hang and improves the aerodynamics of the the bars. The sturdy aluminum construction of the bars allows for a maximum weight capacity 165lbs for the roof rack. Yakima has the JetStream Cross Bar System # Y00426, # Y28TR, # Y06102, and # Y06139 that will fit your...
view full answer... - Parts Needed to Install Yakima Round Bar Roof Rack on 2021 Ford EdgeYes we have the parts needed to install a round bar Yakima roof rack on your 2021 Ford Edge that does not have rails or a glass roof. You'd need the following # Y28TR, # Y03536, # Y06102, and # Y06139 since you already have the # Y00409.
view full answer... - Roof Rack and Kayak Carrier for a 2017 Ford F-150 with Panoramic RoofYakima has a roof rack option that will fit models of the 2017 Ford F-150 that have the panoramic roof. Keep in mind though they state not to open a sunroof or panoramic roof because they may interfere with some accessories. If you have a Super Crew Cab or SuperCab you can use bars # Y00426, BaseLine towers # Y28TR, and 2 sets of clips # Y06122. There isn't an option for the regular cab (if the panoramic roof was even an option for the regular cab models). A popular kayak carrier that...
view full answer... - Roof Rack for 2017 Chevy SparkThere is a roof rack option for your 2017 Chevy Spark but the SportRack # SR1002 is not a fit. Instead, I recommend an option from Yakima. This rack consists of the Yakima CoreBar Crossbars # Y00421, BaseLine Towers # Y28TR, and Fit Kit # Y06124; you can lock this roof rack with SKS Lock Cores # Y07204. This will give you an aero roof rack that helps reduce the amount of wind noise you might otherwise encounter.
view full answer...
- Parts Needed to Install Yakima Round Bar on 2015 GMC Sierra 2500 Crew CabYakima has a roundbar roof rack that fits your 2015 GMC Sierra 2500 crew cab with the part numbers # Y00410, # Y28TR, # Y03536, and # Y06122. Since you have the bars already you'd need everything I mentioned except the # Y00410.
view full answer... - Can I Use My Old Yakima RoundBars On My 2017 Chevrolet ColoradoThere is a solution for you that will allow you to still use Yakima round bars, if you have them. Unfortunately, since the Q-Towers have been discontinued and the new system is not backwards compatible, you will need new towers, a fit kit, and round bar adapters. This is what you need for your 2017 Chevrolet Colorado. BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, part...
view full answer... - Roof Rack Recommendation for Thule Thule Portage on a 2016 Toyota CamryI recommend using a Yakima roof rack with the Thule Portage Canoe Carrier w/ Tie-Downs # TH819 on your 2016 Toyota Camry. Yakima products have great quality and give you a very fine-tuned fit due to the adjustments in the legs that are made for the initial installation. Yakima offer their aero-style crossbars in 2 different options; the steel CoreBar which is a more cost-effective way to get aero-style crossbars, and the JetStream which is made of aluminum and is an upgrade to the CoreBar...
view full answer... - Instructions for Yakima JetStream Roof Rack on 2019 Honda AccordAbsolutely! I have attached the detailed written installation instructions for the Yakima JetStream Roof Rack system that is confirmed to fit your 2019 Honda Accord. This system consists of # Y00425 for the Black 50 Inch JetStream Crossbars, # Y28TR for the BaseLine Towers, # Y06123 for the Front Fit Kit, and # Y06159 for the Rear Fit Kit. This system will use a clamp-style attachment to secure the feet to the roof of your Accord. I have attached an installation video for this system...
view full answer...
- Best Roof Rack for a 2018 Ford Edge with a Naked Roof and Panoramic Vista GlassSince your 2018 Ford Edge has a naked roof the type of roof racks we have available use a clamp style that fits into the door jambs. I recommend the Yakima JetStream system. The aero bars do a great job at reducing drag and wind noise. What sets these apart from other aero bars is the SmartFill strips in the t-slots. You don't need to cut the strips to get them to fit around channel mounted accessories. All you do is push down on the strips and slide the accessoy in. The JetStream...
view full answer...
- Best Roof Rack and Kayak Carriers to Transport 2 Kayaks on a 2019 Ford Edge with a Glass RoofI have a great roof rack recommendation for you! It's the Yakima HD Crossbars, part # Y01157. These aero-style crossbars are 60" in length, so they will extend past the feet by about 5" on each side. Combine these with the BaseLine Towers, part # Y28TR, and the two BaseClips, part # Y06102 and # Y06139, to complete the roof rack setup. I've linked to a video review of the HD bars for you to look at. As for the kayaks carriers, there may not be enough room to lay two of them down flat...
view full answer... - Compatibility of Yakima Roof Rack System with Dual Sun Roof on 2012 Hyundai SonataAccording to our friends at Yakima, they offer a roof rack system compatible with your vehicle that can be constructed using the following parts: Round 58 inch CrossBars, part # Y00409 BaseLine Towers, part # Y28TR Round Bar SL Adapter, part # Y03536 BaseClip Fit Kit, part # Y06144 BaseClip Fit Kit, part # Y06153 The towers will sit just above the doors, and will be located to the outside of the roof edge molding. Therefore, they will come into contact with the metal portion of the roof,...
view full answer... - Recommended Yakima Roof Rack For A 2024 Ford EscapeWe can definitely set you up with a Yakima roof rack for your 2024 Ford Escape with a naked roof. I recommend the Yakima JetStream bar setup. The full roof rack will consist of the following parts: Crossbars - 60' Yakima JetStream # Y00426 Towers - Yakima Baseline Towers # Y28TR BaseClip Fit Kit # Y06137 BaseClip Fit Kit # Y06152 I prefer the JetStream bars over others because the aerodynamic shape will minimize drag and road noise. The Aero Bar shape is basically universal, and you...
view full answer... - Can 2018 Chevy Silverado 1500 Yakima JetStream Roof Rack Hold a Roof Top TentAs long as the roof top tent manufacturer lists the tent as being compatible with a roof rack that has a weight rating of 165 lbs that clamps to the door jambs then yes, the Yakima JetStream System for your 2018 Chevy Silverado 1500 (parts linked below) will work with your setup! The reason I say to check with the instructions of the roof top tent manufacturer is because they all have slightly different requirements for fitment. For example, the Yakima roof top tents say not to use their...
view full answer... - Recommended Roof Rack for a 2024 Acura MDX w/ No RailsI would be happy to help you! To add a roof rack to your 2024 Acura MDX, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178
view full answer... - Recommended Roof Rack for a 2023 Honda HR-VYakima, like all of the roof rack companies, sells their locks separately. To secure a Yakima roof rack to your vehicle you will want the Yakima Same Key System item # Y07204. The price is on the top right side of the product page. The great thing about Yakima's keys being sold separately is you can buy larger packs of keys 6 item # Y07206 or 8 item # Y07208 to secure other Yakima accessories to the roof rack and still only need one key. All of the components of your roof rack will come...
view full answer... - What Roof Rack do You Recommend for a 2020 Hyundai Palisade with a Bare Roof?Fortunately, we do carry roof rack systems that are compatible with your bare roof on your 2020 Hyundai Palisade. For this system, I recommend the following parts: - Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2 # Y00422 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06145 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06138 - (Optional for extra security) Yakima...
view full answer... - What Parts Are Needed to Install Yakima Jetstream Roof Rack on 2020 Hyundai Santa FeTo install a set of Yakima Jetstream crossbars like the part # Y00425 on your 2020 Hyundai Santa Fe will require you to use Yakima Baseline towers part # Y28TR, and the baseclips part number # Y06151 and # Y06154. The Jetstream bars are not compatible with Rhino Rack feet or with Rhino Rack fit kits.
view full answer... - Roof Rack Recommendation for Bike Rack and Cargo Box on 2022 Toyota Corolla Cross with Naked RoofThanks for reaching out! For your application we'll need to stick with the Yakima JetStream system since Thule doesn't have a fit for your 2022 Toyota Corolla Cross naked roof at this time (January 2023). The 50" JetStream crossbars will be a great size for fitting both the Thule FastRide Roof Bike Rack # TH95JV and Thule Force XT Sport Rooftop Cargo Box # TH6356B. Here are the parts you'll need for the complete roof rack system: 50" JetStream Crossbars - Black # Y00425 or Silver # Y00428 BaseLine...
view full answer... - Lowest Cost Roof Rack Recommendation for 2020 Hyundai Santa Fe With Bare RoofThe lowest priced roof rack option we offer for the 2020 Hyundai Santa Fe with a bare roof would be a round bar rack from Yakima. The rack would consist of the following parts: • Yakima 48 Inch Round Crossbars, part # Y00408 • Yakima BaseLine Roof Rack Towers, part # Y28TR • Yakima SL Round Bar Adapters, part # Y03536 • Base Clip Fit Kit # Y06151 • Base Clip Fit Kit # Y06154 Unfortunately, the Malone # MPG215 rack you'd looked at isn't' a fit for your Santa Fe. I've linked you to an...
view full answer... - BaseClips for Yakima Baseline Towers and RoundBar Crossbars on a 2023 Ford MaverickThe correct clip kit for your 2023 Ford Maverick with naked roof to use the Yakima RoundBar Crossbars # Y00409 and the BaseLine Towers for Yakima Crossbars # Y28TR with the RoundBar SL Adapter # Y03536 is the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06180.
view full answer... - Will 79 Crossbars Work On a 2014 Ram 1500 Crew CabThe correct size Rhino-Rack Vortex Aero Crossbar for a 2014 Ram 1500 Crew Cab is part # RRVA150B-2 which measures 59" long. This will then require the Rhino-Rack 2500 Series Legs part # RRRLKVA and Custom DK Fit Kit part # DK043. The majority of crossbars have channels built-into the bottom which will limit the length you can choose for a particular application. If you need longer crossbars, I recommend the Yakima CoreBar Crossbars System which consists of 70" long crossbars part # Y00423,...
view full answer... - Recommendation on a Yakima Roof Rack and Cargo Carrier for a 2016 Mazda CX-5 Naked RoofYour 58 inch Yakima Round Bars, # Y00409, will fit your 2016 Mazda CX-5 as long as you use the correct towers and hardware to install on your Mazda's roof. The towers you will need are the Yakima BaseLine Towers # Y28TR as the Q Towers have been discontinued. You will also need the Round Bar SL Adapters # Y03536, BaseClip Fit Kits # Y06130 and # Y06132. The Yakima SkyBox 18 Cargo Box # Y07336 will work great with this roof rack but we'll need to check to see if the 57" front bar to rear...
view full answer... - Recommended Yakima Roof Rack For A 2024 Ford EscapeWe can definitely set you up with a Yakima roof rack for your 2024 Ford Escape with a naked roof. I recommend the Yakima JetStream bar setup. The full roof rack will consist of the following parts: Crossbars - 60' Yakima JetStream # Y00426 Towers - Yakima Baseline Towers # Y28TR BaseClip Fit Kit # Y06137 BaseClip Fit Kit # Y06152 I prefer the JetStream bars over others because the aerodynamic shape will minimize drag and road noise. The Aero Bar shape is basically universal, and you...
view full answer... - Can Crossbars for a Thule Roof Rack be Spaced Further Apart on a 2012 Honda CR-VThe crossbar spread is 27-1/2 inches for the Thule AeroBlade system on a 2012 Honda CR-V. This is set by where the feet need to install on the roof. The specific locations are chosen because they are the most structurally sound. The fit kit is then made to fit the specific contours of the roof in those locations. Moving the crossbars further apart will lead to damage to the roof and a lower capacity. For a wider bar spread the Yakima system has a spread of 32 inches which is the largest...
view full answer... - Parts Needed to Carry Multiple Kayaks on a 2014 Honda CR-VIn order to carry kayaks on the roof of your 2014 Honda CR-V you will first need a roof rack if you do not already have one. The best option we have for this is the Yakima JetStream Crossbar System which is composed of part # Y00426, part # Y28TR, part # Y06148, and part # Y06152. This system has aero shaped crossbars which will work to reduce both wind noise/drag and they have integrated channels which will accept most channel mounted accessories. You should have no problems using this...
view full answer... - Recommended Yakima Roof Rack For 2015 Honda CR-V With Naked RoofFor a naked roof on your 2015 Honda CR-V, the only available fits involve the custom clips that attach above the windows as you mentioned. All of these systems from Yakima have a load capacity of 125 lbs max. I recommend the roof rack consisting of: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06148 BaseClip Fit Kit for Yakima...
view full answer... - Tonneau Cover And Ladder Rack Availability For A 2023 Honda RidgelineI am sorry but we do not offer a ladder rack and tonneau cover combination for a 2023 Honda Ridgeline. Tonneau covers are readily available, like the BAKFlip G2 Hard Tonneau Cover # BAK26602. The problem is there are no compatible ladder racks available for the Ridgeline. We do offer roof racks for the 2023 Honda Ridgeline. It could be used to carry a ladder or other gear if that is your goal. If that is something you are interested in we recommend the following options: Vehicles With...
view full answer... - Roof Rack for 2015 Honda CR-V with Aftermarket Side RailsIf you are having factory/OEM side rails (that run front to back) installed on your 2015 Honda CR-V then you can certainly use crossbars like the Rhino-Rack # RRRVP33 that you were looking at. These are designed to mount to factory side rails on the Honda CRV so as long as they are genuine OEM rails that are being put on your vehicle, these bars will work great. If the side rails you are adding are from a different manufacturer and are not genuine Honda parts then I cannot confirm compatibility...
view full answer... - Minimum Crossbar Length for Yakima Roof Rack on 2019 Honda RidgelineAccording to Yakima, the shortest crossbars that will work on your Ridgeline is their 'medium' crossbar which is the 60 inch long # Y00426. If you go any shorter than that, the bar won't be long enough to properly connect to the roof rack feet. To provide a rack, if you have the bare roof you'd need the following: 60 Inch Crossbars, part # Y00426 BaseLine Towers, part # Y28TR Vehicle Specific BaseClips, part # Y06152 If your Ridgeline has the side rails on the roof, you'd use the same...
view full answer... - Best Roof Rack for 2020 Ford Escape with Naked RoofThe best roof rack for your 2020 Ford Escape is from Yakima because it will give your Escape a roof rack that is strong (165 lb weight capacity), durable (all parts have a lifetime warranty), quiet and looks sleek. The roof rack for your '20 Escape is made up of: - Yakima JetStream Crossbars # Y00426 (Black) - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima Roof Rack # Y06137 and # Y06152 - Same Key System Lock Cores (Optional) # Y07204 The aero shape of the...
view full answer... - Recommended Roof Rack for 2019 Honda RidgelineThe roof rack I recommend for your 2019 Honda Ridgeline is from Yakima because it will give your truck a roof rack that is not only very sturdy, but also quiet and will keep your Ridgeline looking great. The correct parts for the roof rack will depend on if your '19 Ridgeline has a naked roof or factory installed rails that run front to back. For a 2019 Honda Ridgeline with a naked roof the Yakima roof rack consists of: - Yakima JetStream Crossbars # Y00426 - BaseLine Towers for Yakima...
view full answer...
- Recommended Roof Rack for 2021 Honda Pilot to Use Thule Force XT Cargo BoxWhich roof rack components you'll need will depend on whether or not your 2021 Honda Pilot has the flush mounted rails or a completely naked roof. If your Pilot has flush mounted rails that run front to back on the roof then you'll want to use the Yakima Roof Rack kit for 2021 Honda Pilot that uses parts # Y00421, # Y53TR and # Y00245. This system comes with aerodynamic crossbars that will help reduce the wind noise associated with roof racks. The Yakima Skyline towers # Y00148 can have...
view full answer... - How To Attach Yakima Jetstream Crossbars To 2020 Ford Escape with Naked RoofThe Yakima Jetstream bars will be an excellent accessory added to your Ford Escape. At this time, we do not have in our video or photo library a visual of these crossbars or a roof rack on a 2020 Ford Escape with a naked roof though. The installation process for Yakima BaseLine Towers Part # Y28TR, BaseClips Part # Y06137, and Jetstream Bars Part # Y00425, will be about the same through various applications. With the parts above, when mounting this roof rack to a naked roof, it allows...
view full answer... - Yakima Round Bar Roof Rack Recommendation for 2016 Honda CR-V with Flush RailsFor a Yakima round bar roof rack setup that is confirmed to fit your 2016 Honda CR-V with flush mounted roof rails you would want the Yakima kit part numbers # Y00409, # Y28TR, # Y03536, # Y06148, # Y06152 which is a confirmed fit.
view full answer... - Widest Crossbar Spread Roof Rack Recommendation for 2013 Honda CRVFor your 2013 Honda CR-V the widest crossbar roof rack we have is going to be the Yakima roof rack part numbers # Y00409, # Y28TR, # Y03536, # Y06148, and # Y06152. The spread for this rack is 32 inches whereas most racks are around 27 inch. I can't recommend you widen the spread any more than that or use a track style rack as that will require permanent modification to the roof of your vehicle.
view full answer... - Recommended Roof Rack for a 2022 Ford Escape w/ a Naked Roof and Two Hullavators You don't need 70" crossbars if you go with a different roof rack system which I highly recommend. Mounting two Hullavators item # TH898 is feasible and you will most likely be breaking the law if you stick a 70" wide crossbar on your Escape's roof. For your 2022 Ford Escape with a naked roof, I recommend the roof rack by Rhino-Rack and it includes the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 65" Long - Qty 2 item # RRVA165B-2 Rhino-Rack 2500 Series Legs...
view full answer... - Roof Rack Recommendation for a 2019 Honda Ridgeline with a Naked RoofI checked with Inno and it looks like at this time (November 2021) they don't have a fit for your 2019 Honda Ridgeline with a naked roof, however, we do have some roof racks from other manufacturers that will fit so you're not completely out of luck. If you're looking for something with more of an economic price tag then Rhino-Rack is what you're looking for, but if you'd like a roof rack that has similar features to the Inno roof rack setup then you'll want to go with a Yakima roof rack....
view full answer... - Comparing Thule and Yakima Roof Racks For Durability On a 2018 Honda PilotThe Thule and Yakima roof racks are both excellent options for a 2018 Honda Pilot. In regards to durability, it would really be hard to make an argument for one being better than the other as they both use pretty much the same materials and all parts are coated. That said, rust/corrosion is not really an issue we hear about for roof rack. I prefer the Yakima Jetstream Crossbar System part # Y00426, part # Y28TR, and part # Y06152 which is currently the most cost effective.
view full answer... - Recommended Roof Rack for a 2024 Ford Escape w/ No Roof Rails Congrats on the new SUV. It won't be a problem at all to add a roof rack to your 2024 Ford Escape that looks close to factory. To do so I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Crossbars - Black - Qty 2 item # Y56UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06137 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06152
view full answer... - Naked Roof Rack Recommendation for 2013 Honda CRV to Carry Longer Roof Box for SkisThe naked roof racks that fit your 2013 Honda CR-V do put the front bar significantly closer to the windsheild like with the Rhino Rack part # RRVA137B-2, # RRRLKVA, and # DK284 we have installed on a 2013 CR-V so this would be the way to go. I attached a picture that shows the front bar is more than the amount of inches forward that you would need plus an install video on a similar 2014 CR-V as well.
view full answer...
- Roof Rack Recommend for 2016 Honda CR-V to be Transferred to Truck Camper ShellI can definitely help you out with getting the most parts that will transfer over from your 2016 Honda CR-V! The Yakima roof rack is the way to go since it uses the longer 60" bars as they should transfer over to your truck cab nicely. The only problem is that the legs used for the naked roof on your CR-V won't be compatible with a track system so you will need to get new legs and a different fit kit for the tracks on your truck. A lot of truck camper shells do come with a track system...
view full answer... - Roof Rack Recommendation for 2020 Honda PilotThe rack you need will depend on how the roof of your 2020 Pilot is fitted out. I really like the Yakima JetStream roof rack, because of how well they're built and designed. They may not be the least expensive option, but they work very well and are extremely durable which makes them the most popular choice for your vehicle. If you have a bare roof, you'll need the following parts: • Yakima 60 inch JetStream crossbars, part # Y00426 • Yakima BaseLine roof rack towers, part # Y28TR •...
view full answer... - Can I Use My 2 Square Load Bars to Mount 2 Hullavators on My 2019 Honda Pilot w/Naked Roof?From the measurements you provided, it sounds like you have similar square crossbars like the 65" Inno Square Crossbars # INB165. While we have a solution for you, you won't be able to use the your square load bars because none of our roof rack manufacturers make feet and fit kit that is compatible with a bare roof on a 2019 Honda Pilot. Even if we had those parts, you would need a minimum of 72 inches of crossbar space in order for the required crossbar length for the 2 Hullavators # TH898. Although,...
view full answer... - Can Yakima Tracks Be Cut to Install on 2014 Honda CR-V Bare RoofThanks for reaching out! You can definitely modify the Yakima 54" Tracks for Roof Racks # Y01127 by cutting them and installing them in different sections, yes. To complete this installation you'll need 2 more sets of the EndCaps # Y8810103 and you may or may not need more of the PlusNut Hardware # Y8810102. The installation instructions say to have the PlusNut hardware installed at every other hole so it's just a matter of you deciding how much of the tracks you need. To complete the...
view full answer... - Long Crossbar Roof Rack Recommendation for 2020 Honda Pilot with Naked RoofFor your 2020 Honda Pilot with a naked roof the roof rack we have with the longest crossbars is the Yakima Jetstream rack part # Y00426, # Y28TR, and # Y06152. This gives aerodynamically shaped bars that are 60 inches length which will work really great on your 2020 Honda Pilot. I attached a picture of what this looks like installed as well as an install video as well.
view full answer...
- Is It Normal for Roof Rack on 2020 Ford Escape to Not Be LevelThanks for reaching out! Roof rack manufacturers choose the strongest parts of the vehicle to have the roof racks positioned so while it will be a little uneven, you'll want to install the Yakima CoreBar roof rack for your 2020 Ford Escape (parts listed below) per the Yakima instructions. It's actually really common for the crossbars to be uneven height-wise due to the curve of the roof, like what you said. As long as you install it per the instructions you'll be good to go! Here are...
view full answer...
- Recommended Roof Rack for a 2024 Acura MDX w/ No RailsI would be happy to help you! To add a roof rack to your 2024 Acura MDX, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178
view full answer... - Roof Rack Recommendation for 2019 Volkswagen Jetta with Panoramic SunroofI checked with Yakima who makes a roof rack that fits your 2019 Volkswagen Jetta and they state that with their rack installed there might be some interference with roof rack mounted accessories and the sunroof from opening which means that with just the crossbars installed you'd be able to open the roof. For a roof rack you'd need the part # Y06163, # Y06136, # Y00425, and # Y28TR and you'd be set.
view full answer... - Roof Rack and Kayak Carrier Recommendation for 2019 Volkswagen Jetta with Naked RoofAside from the Yakima roof rack part # Y06163, # Y06136, # Y00425, and # Y28TR for your 2019 Volkswagen Jetta you'll also need carriers for the kayaks. I really like the Yakima JayLow part # Y04073 as it's easy to load, padded, and can fold down when not in use. This would give you a great way to carry both of your kayaks on your Jetta. Then to lock it all you'd want the part # Y07206 which comes with enough cores for the roof rack and the carrier.
view full answer... - 2018 Porsche Macan Yakima Fit For Naked RoofThe Yakima roof rack that will fit your 2018 Porsche Macan consists of the following; Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2, part # Y00422, BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06163, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06189, and Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. This rack has two different...
view full answer... - Does the Yakima Roof Rack Fit a Panoramic Roof on a 2011 Toyota Venza?Yes! The Yakima Roof Rack system for Naked Roofs is confirmed to fit your panoramic roof on your 2011 Toyota Venza. This is a perfect fit for your vehicle. Although, it is important to note that you may not be able to open your sunroof, I recommend measuring the top-most part of your roof when opening to make sure before you attempt it. This Yakima Roof Rack is made of of the parts: # Y00426, # Y28TR, # Y06136, and # Y06163. Check out the installation video on a different vehicle to...
view full answer...
- Yakima Roof Rack For A 2022 Acura MDX With Flush Factory Side RailsFor your 2022 Acura MDX, I recommend the Yakima JetStream Crossbars # Y00426. These crossbars are 60" long, and have a maximum capacity of 165-lbs. Next, you'll need towers like the BaseLine Towers for Yakima Crossbars # Y28TR which have maximum capacity of 220-lbs. Following the towers, you'll need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06163 and # Y06178.
view full answer... - Roof Rack Recommendation for 2021 Porsche Macan with Naked RoofInno does not have a roof rack fit for your 2021 Porsche Macan but we do have other options that would work great. For that I would recommend the Yakima round bar roof rack part numbers # Y00409, # Y28TR, # Y03536, # Y06163, # Y06189. We recently went out and installed several of the roof racks we carry and everyone really liked the Yakima rack the best even though it does cost a little more than some other options.
view full answer... - Roof Rack Recommendation for a 2005 Scion xB and Extended Yakima LoadWarrior Cargo BasketSince you are interested in the Yakima LoadWarrior Cargo Basket with Extension, # Y07070-74, the roof rack that I recommend for your 2005 Scion xB is the Yakima BaseLine Tower Roof Rack which consists of the following parts. 58 Inch Round Crossbars # Y00409 BaseLine Towers # Y28TR RoundBar Adapter # Y03536 BaseClip Fit Kit # Y06163 The LoadWarrior cargo basket with the extension requires a roof rack with a crossbars spread between 30 inches and 50 inches. The BaseLine Tower roof rack...
view full answer... - 2016 Toyota Venza Roof Rack Recommendation to Fit with SunroofI recommend installing a Yakima JetStream roof rack on your 2016 Toyota Venza. This is partly due to all of the other roof racks having a "no-fit" note for the sunroof on your vehicle, but also because the Yakima roof racks are top-notch in quality and design. Here is what you need for your application: 60" JetStream Crossbars - Black # Y00426 BaseLine Towers - # Y28TR BaseClips - # Y06136 AND # Y06163 Lock Core Kit - # Y07204 (optional) If you let me know what you plan on using the roof...
view full answer... - Roof Rack Fit for 2013 Toyota Venza With Panoramic SunroofI checked with our rack manufacturers for you, and there is one roof rack option that will fit your 2013 Toyota Venza with the panoramic (or dual) sunroof, with the rack coming from Yakima; it is made up of the following parts: - Yakima JetStream Crossbars - Black # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06163 - BaseClip Fit Kit # Y06136 This is one of the best roof racks available, as the JetStream bars have what are called "WindRidges" built into...
view full answer... - Roof Rack Recommendation for a 2020 Porsche Macan With a SunroofI am partial to the Yakima roof rack. It has extra adjustments that the other rack companies do not have to provide a better fit for your vehicle. This Yakima rack will allow you to open your sunroof provided the roof rack accessories do not interfere with its operation. The rack for your 2020 Porsche Macan will consist of the following: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2, part # Y00426, BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR, BaseClip...
view full answer...
- Roof Rack Recommendation for 2004 Scion xBI do have a solution for you, however the Yakima Q Towers referenced in your question are not a confirmed fit for the 2004 Scion xB. For your 2004 Scion xB with a naked roof, I recommend the complete Yakima Roof Rack which includes the CoreBar Crossbars, part # Y00422 that you mentioned in your question but also the necessary BaseLine Towers and BaseClip Fit Kit, parts # Y28TR and # Y06163 that will serve as the attachment points for the crossbars. These are aero-style crossbars that...
view full answer... - Recommended Roof Rack for a 2023 Honda Passport With Bare RoofYes, there is a way to add a roof rack to your 2023 Honda Pilot even though you do not have the side rails, and the best option is from Yakima, consisting of the Crossbars # Y36UV, Fit Kit # Y06152 and Fit Kit # Y06163. This rack has a flush design which means the crossbars do not extend past the mounting feet for a great look. This aero bar roof rack system has a 165 lbs capacity. The strips in the top channels dramatically reduce drag and wind noise.
view full answer... - Roof Rack Fit on 2012 Toyota Venza With Panoramic SunroofThere is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
view full answer... - Recommended Roof Rack for a 2024 Toyota Camry w/ No Rails I would be happy to! To add a roof rack to your 2024 Toyota Camry with no rails you will need the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y56UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06163 This flush mounted roof rack does not extend over the sides of your Camry's roof. It has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
view full answer... - Recommended Roof Rack With 100 lb Capacity for 2019 Toyota Camry LEFor a roof rack I recommend the Yakima JetStream roof rack system. You will need the following: -Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 -BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR -BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06163 -Yakima Same Key System (SKS) Lock Cores # Y07204 (optional if you want to add locks) This roof rack is extremely quiet and looks great on any vehicle. The rack is capable of...
view full answer... - Roof Rack Options for a 2009 Toyota Venza with Panoramic RoofI do have an option for you but please keep in mind that the list of available roof racks for your 2009 Toyota Venza is very limited due to the panoramic roof construction. However, I checked with Yakima and they do offer a system for this vehicle which is the Yakima CoreBar System part # Y00422, part # Y28TR, part # Y06163, and part # Y06136. This system has aero shaped crossbars which means it will be less noisy and provide less drag than other crossbar types. The Yakima towers are also...
view full answer... - Recommended Roof Rack for a 2010 Toyota Venza w/ a Panoramic Roof I have a solution for you but there are no Thule systems that will work with your 2010 Toyota Venza and the panoramic roof. Instead you will want the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06136 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
view full answer... - Recommended Roof Rack for a Hullavator on a 2011 Toyota Venza w/ the Moonroof and No Side Rails To use the Thule Hullavator item # TH898 on your 2011 Toyota Venza you're going to need to install a set of crossbars that extend 4" - 8" past the roof racks legs. This allows the lift assist function of the Hullavator to work. Since your Venza does not have a roof rack and you have the glass roof there aren't many options. There is a roof rack that will work for you since you do not have the side rails. You will want the roof rack by Yakima and it includes the following parts: Yakima...
view full answer... - Does Thule Force XT XL Rooftop Cargo Box Fit Yakima Roof Rack on 2023 Acura MDXYes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails. Bare Roof - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06163...
view full answer... - Recommended Roof Rack for 2013 Toyota Venza with Panoramic Glass RoofI do have a solution for you, however the Rhino-Rack roof rack that you referenced will not fit your 2013 Toyota Venza if it's equipped with the panoramic glass roof. None of the solutions from Rhino-Rack are compatible with the panoramic roof on your vehicle. I checked with Yakima though and they do state that their JetStream Crossbar system is compatible with the glass roof and will work great on your Venza. This roof rack consists of # Y00426 for the two 60 inch JetStream Crossbars,...
view full answer... - Recommended Roof Rack for a 2024 Acura MDX w/ No Roof Rails Yes, we do! To add a roof rack to your 2024 Acura MDX with a naked roof you will need the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178 This aero bar roof rack system has a 165 lbs capacity....
view full answer... - Bike Rack Recommendation for 2020 Genesis G70 with 2 Carbon Fiber BikesThe trunk mount bike rack options for a 2020 Genesis G70 are all hanging style racks and while these will technically get the job done, since you have carbon fiber bikes you want to avoid using a bike rack that will be in contact with your bike frames. Normally I would say go with a trailer hitch and a hitch mount bike rack because they are more cost-effective and easier to use, but there are no trailer hitches that fit your 2020 Genesis G70 so you'll want to go with a roof rack and a...
view full answer... - Parts for Yakima Roof Rack on 2018 Porsche CayenneYou will need two of BaseClip Fit Kits, # Y06163. The kit comes with two pads and two clips in each box. If you are using our fitguide to look at the roof rack kits it breaks everything down to show the exact quantity of each item you will be receiving with the roof rack kit. All together you need four clips and four pads to attach the Baseline Roof Rack Towers # Y28TR to your Cayenne. The Yakima JetStream Crossbars # Y00426 are a good fit to complete your roof rack kit. I have attached...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Video Edited:
Chris R
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.