Instructions for Yakima JetStream Roof Rack on 2019 Honda Accord

Question

Question:

Dear etrailer I am looking at the Yakima Jeststream roof rack for my 2019 Honda Accord but would like to review the instructions before purchasing. Can you provide them for me. Thank you.

asked by: Brad

0

Expert Reply:

Absolutely!

I have attached the detailed written installation instructions for the Yakima JetStream Roof Rack system that is confirmed to fit your 2019 Honda Accord. This system consists of # Y00425 for the Black 50 Inch JetStream Crossbars, # Y28TR for the BaseLine Towers, # Y06123 for the Front Fit Kit, and # Y06159 for the Rear Fit Kit.

This system will use a clamp-style attachment to secure the feet to the roof of your Accord. I have attached an installation video for this system on the 2018 Honda Accord that you can also follow along with.

expert reply by: Chris R

0

click to enlarge

Answer 1

To install a set of Yakima Jetstream crossbars to a Skyline tower you do need the adapter part #8880637.

view full answer...

Answer 2

The thread size of the Replacement Anchor Plate #Y8810074 is M6.

view full answer...

Answer 3

Yes, the Replacement Anchor Plate "A" for Yakima Landing Pad 1 #Y8810074 will fit the Yakima rails on your A.R.E. truck bed camper. Please note that these are meant to be used with the Yakima Landing Pad 1 feet so it may not fit your…

view full answer...

Answer 4

The best tonneau cover for a toolbox on your 2023 GMC Sierra 2500 is the Extang Solid Fold 2.0 due to its durability, strength, and overall ease of use. The correct fit for your '23 GMC Sierra 2500 depends on your bed size: - Standard Bed…

view full answer...

Answer 5

The mention of the 9th link on the Blue Ox SwayPro Weight Distribution w/ Sway Control part #BXW1000 if referring to the very last link furthest away from the spring bar. This is where you will start your chain as you are applying tension on them…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

Hey Luke, Sorry about the confusion, and we can 100% get your 2007 Honda Civic 4-door sedan set up with all the parts needed for a Rhino-Rack roof rack, including both crossbars. You would just need these parts: - Rhino-Rack Vortex Aero Crossbars…

view full answer...

Answer 10

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 11

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 12

The Thule Hullavator Pro, part #TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those…

view full answer...