What Parts Are Needed to Install Yakima Jetstream Roof Rack on 2020 Hyundai Santa Fe

Question

Question:

I have several sets of the Yakima JetStream bars but Yakima hasn’t, and probably won’t make the clips necessary to mount my towers to my existing roof rails. Could I mount my JetStream bars to the Rhino Rack RRRCL4 mounts? Thanks

asked by: Rick

0

Expert Reply:

To install a set of Yakima Jetstream crossbars like the part # Y00425 on your 2020 Hyundai Santa Fe will require you to use Yakima Baseline towers part # Y28TR, and the baseclips part number # Y06151 and # Y06154. The Jetstream bars are not compatible with Rhino Rack feet or with Rhino Rack fit kits.

expert reply by: Jameson C

0

Answer 1

Yes, you are correct the etrailer Hitch item #e28AR does indeed fit the 2023 Hyundai Santa Fe. This hitch is custom fit and bolts to your Hyundai with included hardware. I really like the etrailer hitch because the crosstube mounts behind your rear…

view full answer...

Answer 2

If your 2016 Honda Accord is a 4-door model then use Rhino-Rack fairing #RRRF2 which is 38 inches. If you have a 2-door Accord use #RRRF3 which is 44 inches. I have linked a video review of the 44 inch model for you.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...

Answer 10

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...