Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2
(283 reviews)
Price: $143.90
In Stock
Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2
Item # Y00221
Our Price: $143.90
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (283)
- Q & A (0)
- Videos (2)
- Photos
Yakima Roof Rack - Y00221
- Fit Kits
- 2 Pack
- Yakima
Custom-fit Landing Pads allow you to attach SkyLine and Control Towers to vehicles with standard, C-shaped rack tracks. Mount to existing tracks and combine with SkyLine and Control Towers to create a base for an aftermarket roof-rack system.
Features:
- Provide mounting point for Yakima SkyLine and Control Towers
- Fit vehicles with C-shaped factory rack tracks
- Attach to factory tracks with anchor plates and screws
- Include snap-on covers for protection when Towers are not in place
Specs:
- Quantity: 2 pads
- Lifetime warranty
8000221 Landing Pad 1 for Yakima Control or Sky Line Towers
Installation Details
Video of Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Yakima Roof Rack - Landing Pad 1 SkyLine And Control Towers - Y00221
Hi everybody. Andy here with etrailer.com and today we're gonna take a quick look at this Landing Pad One for Yakima SkyLine and Control Towers. Now, these are going to provide mounting points for your Yakima SkyLine and Control Towers. And these are going to fit with the C shaped factory rack tracks. And you're just going to attach these to your factory tracks with the anchor plates and screws that you see right here. And if you notice, these also include snap-on covers for protection when the towers are not in use.
So that's a nice addition to this set. And you are going to receive two pads. And again, all the hardware that you're going to need to install them along with a great set of instructions to guide you through the installation process. And this does have a lifetime warranty from Yakima. And that's going to conclude our brief look today.
I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- etrailer mistake
Customer Reviews
Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 - Y00221
Average Customer Rating: 4.8 out of 5 stars (283 Customer Reviews)
Custom-fit Landing Pads allow you to attach SkyLine and Control Towers to vehicles with standard, C-shaped rack tracks. Mount to existing tracks and combine with SkyLine and Control Towers to create a base for an aftermarket roof-rack system.by: See11/03/2022
with so many variables having someone that could sort through all them was very helpful Thanks etrailer
by: Rob04/19/2023
Honestly, I love etrailer. I love the expert help that you all provide. It's clear by the 1 year follow-ups that you care more about the relationships with your customers then just making a sale. Your service is friendly, informative and fast. I always come here first to look for my next purchase. Thanks again-Rob.
by: Doug02/16/2022
First trip with the new rail system and it looks like it worked out just fine. Thanks to both of you and Kimberly for all of your help and follow up I do appreciate it.
Doug
2/18/2023
Ive had the rail system on my truck for about a year now and its been a tremendous help. It allows me to still use my bed and provides much needed extra storage space, mostly for all the dog items we carrycrates, gates, beds, food, etc. I like the fact the rail locks to the truck so I dont need to remove them at home or at our destination.
by: Nelson06/26/2023
It was what it was advertised and fit perfectly on my 2023 Ford Maverick
by: Bryan03/27/2024
Very nice and heavy duty. They don’t look too fragile on a lifted truck with oversized tires.
by: Frank P.03/06/2016
Fit good with the OE track on roof. I like the new covers they supplied with the mounts.
by: Jerry 07/29/2023
I have ordered several times from Etrailer and have always received efficient, timely and reasonable shipped items. Did not use customer service with this order but it has always been good.
by: Ric 07/22/2023
Honestly went back to etrailer after buying something i couldnt find on the big A before because their support was so good and delivery speed was soo fast.
by: Aaron 02/10/2024
Perfect match
by: Hogan06/09/2023
I’ve placed 2 separate orders with etrailer in the last 6 weeks. Their service, response, pricing and follow-through have been terrific each time. I will use them every chance I get.
by: Earthdog Mom05/11/2023
Quality product, timely shipping, transported with care. Packaging received fully intact with no damage.
Thank you etrailer for yet another great ordering experience!
by: Pat G08/29/2013
Great first experience dealing with you guys! Shipped fast, and was a faster install. You gave me the right parts and it went together in a flash.
Will definitely be doing business with you all again.
by: Brad G02/04/2023
I ordered a Yakima roof rack system here and it was easy to find what I needed for parts to install on my truck cap. Very solid product and this company ships quickly every time I've ordered from them
by: William 01/11/2024
2022 Ford F-350 Super Duty
Shipment received, as ordered! Thanks again to Bryce D., for assistance.
by: Richard 05/04/2021
2021 Toyota Tundra
These Landing Pads are needed with the Yakima System to connect the Towers (which hold the crossbars) to the rails, which in my case are on top of my pickup canopy. There are many sizes of Landing Pads available, but the Landing Pad 1 I needed connects to the standard Yakima Rails. etrailer had them in stock when I needed them and shipping was fast and easy.
by: Bdpickle08/11/2017
2002 Suzuki Aerio
It says 4 pack on the item description and I got 2? And now there is no reply from etrailer about my inquiry. Is there really someone sending me a request to review this or is George J a computer ?
Laura E.
8/19/2017
Thank you for taking the time to submit your review and we appreciate your business. I apologize for the delay in responding, but I can assure you that reviews are viewed by real people. I see that customer service was able to help you and we hope that you will continue to use etrailer.com in the future.
by: Dan 11/06/2023
Great company! Fast delivery.
by: Clifford04/10/2018
2010 Chevrolet Silverado
Product worked well with my already installed Yakima rails and the towers attached to bars that I use on another vehicle. Easily installed. Now I can switch the kayak carrying Yakima bar and tower rigs from one vehicle to the other with minimal effort.
Clifford J.
4/10/2019
Just fine!
by: Carlos M.12/26/2018
2016 Ford F-150
Bought these Landing Pad 1 bases to use with Yakima tracks on a Leer camper shell on my 2016 F150. The bases are very easy to install and worked perfect with my Control towers. Great quality as expected with Yakima.
by: Mickey H03/27/2017
I've been using the roof rack a lot in the last year for recreation and for work. They give me confidence that the load will stay put, and arrive safely. I also take them off frequently since they hum happily at highway speeds, so I'm happy that the bars are easy to lock on or take off.
by: John02/18/2022
These will mount to the rhino rack tracks so I could use my Yakima control towers and rack.
by: Alan07/04/2020
I needed to mount racks on my new topper. Though pricy, Yakima products are so well engineered it's worth it. Wish there was not such a long wait for back-ordered products, but that's not the fault of etrailer.com.
Etrailer.com service is great. I especially like the instructional videos.
by: Luke 07/24/2023
2022 Ford F-250 Super Duty
Works as described
by: Dennis08/15/2019
Om my 1996 Ford Explorer, after the plastic factory cross bars failed, I was able to use the etrailer web site and tech support to determine that landing pads were available that fit the factory track and would allow me to use my Yakima towers and round bars. This was a great fix!
25
283
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Is the Mounting Hardware for the Landing Pads for Yakima Control Towers Part # Y00221 IncludedThe mounting hardware that is needed to install the Landing Pads for Yakima Control Towers part # Y00221 is included therefore no additional purchase will be necessary. I have attached a photo that shows everything that is included in the kit above for you as well.
view full answer...
- Which Yakima Landing Pad Fits Truxedo Elevate Ladder Rack RailYou are correct, it is the Yakima Landing Pad 1 part # Y00221 that is compatible with the Truxedo Elevate TS rails.
view full answer... - How To Mount Yakima Towers In Retrax Tonneau Cover TracksIf you have the Yakima Skyline or Control Towers then you can use the Landing Pad 1 for Yakima SkyLine and Control Towers part # Y00221 to mount them into tracks/channels like those found on select Retrax Tonneau Covers.
view full answer... - Dimension of Mounting Hole Spacing of Yakima Landing Pad 1 #Y00221I was able to go out to the warehouse and measure the Yakima Landing Pad 1 for you and found that the mounting hole spacing is 3-15/16 inches from center to center. I have linked a picture and the part to this page for your convenience.
view full answer...
- Will Yakima Q-Towers Work with Thule Roof Tracks on Camper ShellIt sounds like you're trying to reuse an old Yakima Q-Tower System on a camper shell with roof tracks installed. If that's the case then I hate to be the bearer of bad news, but this just simply isn't possible with off the shelf parts. That said, I do have a way for you to use your old round crossbars, you'd just need the Replacement Yakima Control Tower for Factory-Installed Tracks part # Y8890027 (QTY. 4) and Landing Pad 1 for Yakima SkyLine and Control Towers part # Y00221 (QTY.2). These...
view full answer... - What Are Replacement Anchor Plates for Yakima Landing Pad 1 Made OfI reached out to Yakima, who told me the Replacement Anchor Plate "A" for Yakima LandingPad 1 (QTY 8) # Y8810074 are made of stamped stainless steel. They said it can potentially rust, but only after many years and exposure to oxidizers. These are a direct replacement for the anchor plates in the Landing Pad 1 for Yakima Control Towers # Y00221.
view full answer... - What is the Difference Between Yakima Landing Pads 1 and 4The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
view full answer... - Landing Pads for the Yakima TracksIf you have Yakima tracks like part # Y01135, these accept the Yakima Landing Pad 1, part # Y00221. These connect to the Yakima Control Towers. They come in a pack of 2, so for two bars you will need to get two of these (to make 4). If you have different towers or tracks, let me know and I will help you find what you need.
view full answer... - Replacement Parts for Yakima Roof Rack Installed on 2011 Chevrolet Suburban with Roof TracksThe Yakima Replacement Hardware Kit # Y8890028 that you referenced is the correct one for use with their Landing Pad 1 for roof racks. The Yakima Landing Pad 1, part # Y00221, is the correct one for your 2011 Chevrolet Suburban with factory installed roof tracks. Please see the linked page.
view full answer... - Replacement T-Slot Nuts & Bolts Hardware For Yakima Landing Pad 1To mount Yakima SkyLine towers in your UltraGroove the foot pack is the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221, and the correct replacement hardware with the T-slot nuts and bolts for this foot pack is the following: - Replacement Hardware Bag for Yakima Landing Pad 1 # Y8890028 You'll need a quantity of two of the # Y8890028 for all four feet.
view full answer... - Replacement Yakima Control Tower for Tracks on 2010 Subaru OutbackThe Replacement Yakima Control Tower for Factory-installed Tracks (QTY 1) # Y8890027 is the correct replacement you are seeking. The Landing Pad 1 for Yakima Control Towers - Qty 2 # Y00221 is the correct fit for tracks which looks like what you have. There are other Landing Pads, but this is the correct fit for the Control Towers.
view full answer...
- Replacement Anchor Plates For A Yakima Bar SystemWhen it comes to replacement Anchor Plates # Y8810074 it replaces the 8 threaded anchor plates for the Yakima LandingPad 1 # Y00221 which works with the Yakima SkyLine and Control Towers. Per Yakima It will not fit the Yakima HD bars.
view full answer... - Replacement Base for Yakima Skyline Towers on Camper ShellIt sounds like you already have the crossbars and feet and just need the bases. If that is the case, then you just need two of the Landing Pad 1 for Yakima Control Towers - Qty 2 # Y00221 which is a fit for the rails. If that isn't the case, then the Yakima JetStream Truck Bed Rack for Tonneau Covers - Aluminum - 70" Long # Y00427-482104 will work to give you the complete kit for your rails.
view full answer... - Yakima Landing Pad 1 vs. Landing Pad 26The difference between the Yakima Landing Pad 1 # Y00221 and Landing Pad 26 # Y75ZR are what they fit. The two come with different hardware and the Landing Pad 1 is mostly for some factory tracks as well as specific vehicles, while the Landing Pad 26 is for Yakima tracks. So the right one is really going to depend on what application you have.
view full answer... - Which Yakima Towers Can Install in Retrax XR Tonneau RailsYakima's Skyline towers part # Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part # Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers though.
view full answer... - Does Yakima Landing Pad 1 Fit Yakima 54 HD Tracks for Roof Racks Y64MRYour Yakima Landing Pad 1 part # Y00221 is the correct Landing Pad for the Yakima Tracks like the part # Y64MR that you referenced.
view full answer... - Will the Yakima Control Tower Roof Rack Fit on a 2005 GMC Envoy With Factory TracksThe Landing Pad, # Y00221, that you referenced will work with the existing tracks on your 2005 GMC Envoy. This landing pad is part of the Yakima Control Tower Roof Rack. You will also want to pick up the Round Crossbars, # Y00408, and the Control Towers, # Y8890027 (you will need 4). These additional items will complete the roof rack assembly for your vehicle. You will not need to remove anything from your roof rack. I have attached a review video of this roof rack for you to check out....
view full answer... - How To Identify A Set of Roof Tracks On A Camper ShellIf you were to measure the width of the track that would then give you the best chance of identifying it. However, this really is not needed because the slots are pretty much universal so you can mix and max brands. The most cost effective system we would have is going to be a Yakima Round Bar System. The round crossbars are cut to fit. In order to obtain this you will need to order the following: Round 78" CrossBars for Yakima Roof Rack System part # Y00411 (Qty 1) Replacement Yakima...
view full answer... - How to Install Yakima Skyline Tower Setup on CamperThe only way to install a Yakima Skyline tower setup on a camper like what you have will require installing a set of tracks on the roof first like with the part # Y01135. If you have the clearance for the 60 inch long tracks, then the Yakima tracks will mount to your camper. You will need to use the SkyLine Towers, # Y00148, to attach any of the Yakima crossbars to the track system. Also, the Yakima Landing Pad 1, # Y00221, is needed to attach the SkyLine towers to the track rack. The...
view full answer... - Roof Rack Recommendation for 2022 Mercedes Benz Sprinter 2500 High RoofYes we have the Yakima HD roof rack that fits your 2022 Mercedes-Benz Sprinter 2500 with part numbers # Y01158, # Y00148, # Y03541, and # Y00221. What's great about this rack is that it has a much higher weight capacity, is still aerodynamic shaped, and also has a lifetime warranty.
view full answer... - Yakima Roof Rack Components Needed to Install Roof Rack in Pace TonneauI spoke with my contact at Yakima and he told me that you will need the part numbers # Y00221 (quantity of 2), and part # Y8890027 (quantity 4) for the feet and then crossbars # Y00409 to complete a rack in the Pace rails of your tonneau.
view full answer... - Recommended Tie Downs For Yakima Tracks That Use Yakima A Anchors Y8810074We have exactly what you are looking for. The Yakima A Anchor plates # Y8810074 you purchased are designed to work with the Yakima Landing Pad 1 # Y00221 which is not what is in the picture of the landing pads you purchased so you will need to purchase new landing pads. You can definitely come up with your own tie down anchors, but there is an easy option that will fit your tracks. The Eye Bolts # Y01162 will fit perfectly as they have a mounting plate with the exact same dimensions...
view full answer...
- Yakima Roof Rack Recommendation for Yakima Tracks Installed on Wrangler HardtopIf you have a set of round crossbars you'd be able to reuse them, but with the Yakima track part # Y01126 you can use the Railgrab feet. You'll need a set of the Landing Pad 1 part # Y00221 for each crossbar and then the Control Towers part # Y8890027 for each of the feet. You'll need a total of 4.
view full answer... - Adding Crossbars to an ARE Camper Shell with TracksI believe your ARE camper shell has Yakima tracks installed but it doesn't really matter which brand you have as most of them will accept each others mounting feet. However, Yakima has the most cost effective option for you so I recommend using the landing pads part # Y00221 (2), control tower part # Y8890027 (4), and crossbars part # Y8810025 (2). The round crossbars are cut to fit. This is the most inexpensive option we have for you to add crossbars to your ARE camper shell.
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Video Edited:
Zack K
Video Edited:
Dustin K
Written by:
Tyler C
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Jeffrey L
Video by:
Joshua S
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Alex H
Updated by:
Michael B
Updated by:
Noah M
Installed by:
David F
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ralph C.
11/6/2023
Great had a few Hic-Ups getting the correct set E-Trailer reps were all over it and got me going Great Company to work with