Replacement Hardware Bag for Yakima LandingPad 1
(23 reviews)
Price: $17.95
Replacement Hardware Bag for Yakima LandingPad 1
Retail:$19.00
Our Price: $17.95
You Save: 6%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (23)
- Q & A (0)
- Videos (1)
- Photos
Yakima Accessories and Parts
- Roof Rack
- Hardware
- Tower Parts
- Yakima
This replacement hardware bag for Yakima LandingPad 1 includes four bolts with washers, bolts and anchor plates for attaching LandingPads to your factory-installed roof-rack tracks.
Features:
- Replaces mounting bolts and hardware for Yakima LandingPad 1
Specs:
- Application: Yakima LandingPad 1 (Y00221)
- Screw size: M6 x 20
8890028 Replacement Hardware Bag for Yakima LandingPad 1
Item # Y8890028
Video of Replacement Hardware Bag for Yakima LandingPad 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Yakima Replacement Hardware Bag LandingPad 1 - Y8890028
Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a real quick look at this Yakima replacement hardware bag. This is going to replace the mounting bolts and hardware for your Yakima Landing Pad 1. And on your screen, I do have the model number for that Landing Pad 1 for your reference. This bag includes the hardware you need for attaching your landing pads to your factory-installed roof racks.
The screw size is M6 by 20 and this hardware bag is directly from Yakima so you can proceed with confidence knowing that you're not gonna have any compatibility or fitment issues. It should fit right in place of the original. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy.
Thank you for joining me.
Customer Reviews
Replacement Hardware Bag for Yakima LandingPad 1 - Y8890028
Average Customer Rating: 4.9 out of 5 stars (23 Customer Reviews)
This replacement hardware bag for Yakima LandingPad 1 includes four bolts with washers, bolts and anchor plates for attaching LandingPads to your factory-installed roof-rack tracks.by: Frank07/04/2023
service was excellent. Item was received quickly. It appears to mache up wit h my equipment which is what I was looking for.
by: Jim J10/03/2017
I received my order correctly and on time. The Yakima accessories speak for themselves. etrailer is a great place to buy!
by: James04/20/2018
Good product, inserts fit well. Could use a simple assembly picture to show how the plastic washer is placed.
by: Humberto11/05/2018
I have been looking for this part for a while and etrailer had the best price and delivery time was great. Price was better then even other websites, including the free delivery for been prime.
Thanks
by: Nick01/15/2014
The product is as described and will work for my application. The customer service was great and the shipping was fast. I would buy from etrailer again!
by: Juseok01/21/2023
No stock waited so long...!
by: Dustin12/05/2018
I was very satisfied with the service provided by etrailer and also the product I received.
by: GB06/25/2017
Top notch service, fast shipping. Merchant worth keeping for future needs. Yakima hardware in stainless steel is on top.
by: Roland 09/03/2020
Exactly what I needed for my setup!
As always, etrailer ships fast. Thanks!
by: Jeff 09/12/2021
Perfect replacements!
by: John R06/07/2016
Everything was delivered in good condition, Ericka was very helpful with the order.
Thank you.
by: Leon 07/12/2022
Fast delivery and great products!
by: Jeff 08/18/2022
Perfect
by: Tom m 04/04/2019
Still working after a year
by: Brian 10/25/2021
Item came on time as described. Can’t wait to use it!
by: David g12/10/2016
Great response, excellent customer serv ice!!!
by: Stacy 02/08/2024
by: Timothy04/16/2019
Exactly what I needed. Exact same as manufacturer product so exact fit
by: Robert 08/22/2020
Just like what’s in the picture plus an Allen key.
by: Bill 09/25/2022
by: Mark 06/16/2023
by: Sean 08/22/2023
by: Thomas 11/21/2022
23
23
See what our Experts say about this Yakima Accessories and Parts
- How Long are the Screws in Replacement Hardware Bag for Yakima LandingPad 1 # 8890028I spoke with my contact at Yakima on replacement hardware bag # Y8890028. The bolts are M6x20. The 20 is millimeters so they are 20 millimeters long. This is a little over 3/4 of an inch.
view full answer... - Replacement Bolt For C Plates Used With Yakima Landing Pad 5I called my contact at Yakima about the bolt you need for the Landing Pad. The bolt is not sold as an individual item and it is not included in a replacement C Plates for Landing Pad 5. They are included with the hardware bag for LandingPad 1, part # Y8890028. If you do not want to buy the entire kit you can visit a local hardware store and the bolt is M6 x 20.
view full answer... - How Many Landing Pads does LandingPad1 Fit Kit part # Y8890028 FitThe hardware kit for LandingPad1 part # Y8890028 comes with components for all four landing pads.
view full answer... - Size of Anchor Plate That Comes With Replacement Hardware Bag for Yakima LandingPad 1The anchor plates that come with the Replacement Hardware Bag for Yakima LandingPad 1 part # Y8890028 are 3/4" x 7/8". The thread size for the bolt is M6.
view full answer... - Does Yakima Roof Rack Mounting Hardware Self-Lock or is it Meant for One-Time InstallationAftermarket roof racks including those from Yakima are meant to be taken off and put back on as needed. It is possible that if the roof rack was on long enough the hardware could seize up a little. Check to see if the hardware can thread in and out like normal and if it can then it was likely that the hardware was bound up a little or perhaps a combination of grit and time caused it to seize a little. I do recommend using some penetrating spray and a wire brush to make sure the threads...
view full answer... - Is Replacement Hardware Bag for Yakima LandingPad 1 Steel or AluminumThe screws and plates of the Replacement Hardware Bag for Yakima LandingPad 1 # Y8890028 are made of steel that is zinc coated.
view full answer... - Nut/Bolt that Can Fit Yakima Roof Channels on Camper ShellThe Yakima roof channels are much bigger than what the # Y8880184 is designed to fit. The only solution would be the hardware bag part # Y8890028 which is the track nut and bolt that is designed to fit the channels you have.
view full answer... - Replacement Hardware For The Yakima LandingPad 1 Yes, the Replacement Anchor Plate "A" for Yakima LandingPad 1 # Y8810074 is the same anchor plate that is in the Replacement Hardware Bag for Yakima LandingPad 1 # Y8890028. For the bolts # Y8890028 does come with 4 of the corresponding M6 x 20mm bolts.
view full answer... - Replacement T-Slot Nuts & Bolts Hardware For Yakima Landing Pad 1To mount Yakima SkyLine towers in your UltraGroove the foot pack is the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221, and the correct replacement hardware with the T-slot nuts and bolts for this foot pack is the following: - Replacement Hardware Bag for Yakima Landing Pad 1 # Y8890028 You'll need a quantity of two of the # Y8890028 for all four feet.
view full answer... - Replacement Parts for Yakima Roof Rack Installed on 2011 Chevrolet Suburban with Roof TracksThe Yakima Replacement Hardware Kit # Y8890028 that you referenced is the correct one for use with their Landing Pad 1 for roof racks. The Yakima Landing Pad 1, part # Y00221, is the correct one for your 2011 Chevrolet Suburban with factory installed roof tracks. Please see the linked page.
view full answer... - Are Anchor Plates and Hardware Included with the Yakima TracksThe Yakima 60" Tracks # Y01135 only come with hardware to mount the tracks. The hardware bag # Y8890028 is designed for mounting the Landing Pad 1 # Y00221 in these tracks so I wouldn't be able to tell you off-hand if these are compatible for your solar panel application or not. I did go out to the warehouse and found that the M6 x 20 screws will allow you to have about 1/2" of material between the washer and the top of the Yakima tracks. If the mounting brackets for your solar panels...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Written by:
Tyler C
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Wilson B
Updated by:
Brian T
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mike L.
4/21/2018
The Yakima Landing Pad 1, part # Y00221 has a link to the installation instructions which show how the hardware assembles. Ive linked those instructions for your convenience.
Helpful Links
instructions.aspx?pn=Y00221