Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers - Qty 4
(93 reviews)
Price: $8.02
In Stock
Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers - Qty 4
Item # Y8880184
Our Price: $8.02
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (93)
- Q & A (0)
- Videos (1)
- Photos
Yakima Accessories and Parts - Y8880184
- Trailers
- Watersport Carriers
- Roof Rack on Wheels Parts
- Watersport Trailer Parts
- Nuts and Bolts
- Yakima
- Rack and Roll
Replace lost or damaged T-bolts on your Yakima Rack and Roll trailer. Kit includes 4 bolts and nuts.
Features:
- Replaces lost or damaged T-bolts on Yakima Rack and Roll trailers
- Kit includes 4 T-bolts and nuts
Specs:
- Application: Yakima Rack and Roll (Y08106 and Y08107) trailers
8880184 Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers - Qty 4
Video of Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers - Qty 4
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Yakima Replacement T-Bolts With Nut For Rack And Roll Trailer - Y8880184
Hi, everybody. Andy here with etrailer.com, and today we're gonna take a brief look at these Yakima Replacement T-Bolts. Now these are going to replace the lost or damaged T-Bolts on your Yakima Rack and Roll trailers. And as you can see, this includes the T-Bolt, the washer, and the nut, and you are going to receive four of these. And on your screen I am including the measurements of the bolt itself in case you need that information. I took a look at some of the Q&As on our product page and I noticed that quite a few of our neighbors were asking about the measurements of the bolts, so this diagram is also in the Q&A section of our product page if you need to refer to it again.
But these bolts are the direct replacement from Yakima, so you can have the confidence that these are going to work just like the originals that you are looking to replace. Whether you lost one or two or more, or one of them, or a couple of them became damaged for whatever reason, these are going to be exactly what you need for your Rack and Roll trailer. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy.
Thank you for joining me.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers - Qty 4 - Y8880184
Average Customer Rating: 4.9 out of 5 stars (92 Customer Reviews)
Replace lost or damaged T-bolts on your Yakima Rack and Roll trailer. Kit includes 4 bolts and nuts.by: Arie02/04/2024
These don’t fit in Yakima tracks. The base plate is too thick.
by: Kody09/05/2023
I'm grateful to etrailer for helping me find the T-Bolts I needed for my Roll n Lock Tanneau Cover. The staff was able to quickly identify the right T-Bolts for my application, and they were happy to answer all my questions. The T-Bolts fit perfectly and I'm confident that they will hold up for a long time. I would recommend etrailer to anyone looking for T-Bolts or other auto parts.
by: Robert 02/16/2024
Big & sturdy, used them to mount an old cargo box to the top of the Yakima Aero bars on my new car
by: Lauren 11/12/2023
Exactly what I needed to replace some aging T-bolts on our Yakima Rack N Roll Trailer. No one else seemed to have these when I needed them (not even Yakima), and the wait was long due to supply issues out of eTrailer's control; however their customer service staff periodically provided updates on their availability, and eventually they came in. Thanks eTrailer!
by: Andrew 02/13/2024
As others have already said these T bolts are solid perfect for the job. E Trailer is a fabulous option for all parts related to exterior hauling
by: Mike M.05/26/2018
These are substantial T bolts. I used them to attach the brackets for an ARB Touring Awning to my Yakima Jet Stream racks. I had to drill out the brackets to accommodate the Yakima bolts.
by: Spencer06/13/2023
This was perfect for what I was trying to do thank you!!
by: 2n’s06/15/2019
Worked perfectly to install my 6 foot long ARB awning onto my Yakima Jetstream cross bars. Drilled out the ARB brackets to 10mm to fit these T-bolts. Very heavy duty and excellent quality hardware.
by: Steve05/24/2020
These fit factory rack tracks on leer topper. Yakima?? Anyway fit perfectly for my application. My $50 homemade kayak/canoe carrier. Used super strut from big box store.
by: Vincent03/11/2018
I have bought many items from this site. They have always been delivered on time and as ordered. I wouldnt hesitate to recommend etrailer to friends and family. I used them to create a deck on my yakima trailer by counter sinking the bolt.
by: David05/05/2021
These are some heavy duety bolts they fit perfectly with THULE PRO BARS. I definitely recommend these instead of other [online store] options I've tried.
by: Chad 01/22/2023
Used these for the T slot on my yakima HD bars. They are 10mm studs so they have some heft to them, used them to mount my roof top tent. Good quality and they work well with the HD bars.
by: Eli03/27/2023
I ordered this item because it was advertised as delivery in two days. Tracking allowed me to see that the warehouse guys packaged it quickly, and then it sat. It took 24 hours before it was received by the shippIng company. It took 6 days to get to my house. Unfortunately I am now working out of town and won’t be able to use it until I return in two weeks.
I would have shipped it elsewhere if I had been provided accurate information. Disappointing…
by: Payton06/09/2021
Perfect fit with Yakima roof tracks on ARE camper shell for Toyota Tacoma. Probably for any roof track. The bolts/ nuts/ and washers are 10mm. High quality and exactly what I needed for my DIY roof rack.
Payton
6/10/2022
Perfect- no problems after a year!
by: Michael05/30/2019
I used these to mount a bike rack for our tandem bike onto our Thule Aerobars. They slide into the Aerobars without any trouble, and they seem to be very sturdy. One note is that the bolt size is not 3/8". It is 10mm.
Michael
5/31/2020
Ive had as many problems with this product over the last year as I wanted... ZERO!
by: Ricardo05/01/2023
Product was solid great price and as usual always satisfied have always bought several products from eTrailer never disappointed
by: Maxwell 09/21/2022
They work great for mounting anything on my Yakima Jetstream crossbars.
by: FooF02/24/2023
Perfect fit on rivian crossbars
by: Dan 02/25/2023
Worked great on Yakima rack bars.
by: Arthur05/27/2021
Perfect replacement for my Yakima Rack and Roll Trailer.
One thing that is important to note.
They are either the real part or made to Yakima OEM standards.
Why is this important?
I’ve never received cheap imitations or counterfeit parts from etrailer. But with the giant internet only retailer that also has a steaming service snd rents out its cloud, I’ve been ripped off by organizations in that supply chain that use manufacturer’s pictures and write ups to move shoddy substandard goods.
Given the safety risks of hauling any roof rack or trailer down the highway, etrailer and their supply chain ethics and authenticity gives me piece of mind
by: Joel 09/12/2022
Just what I needed to add accessories onto Yakima HD bars
by: Jun05/26/2022
These are seriously beefy and high quality bolts. Great for rack hackers like me that have a variety of equipment from different brands. They fit Thule T-tracks perfectly.
by: Edward 05/17/2021
I purchased these T-bolts and nuts to fit the roof rails/mounting rails of a Yakima roof rack. As soon as they arrived I got up on the ladder to check the fit and it is perfect. These will be used to mount solar panels on the roof of my truck cap to charge my RV batteries while I am driving. And like usual for me I purchased extra sets...because while 2 isn't enough, what if I want to add something else to the roof rails....
by: Gregory07/03/2019
These are exactly what I was looking for to incorporate into my Retrax Pro XR tonneau cover build with the Yakima overhaul HD rack. These fit perfectly into the T-Slot on the retrax Pro XR cover slot. These feel very strong.
by: Tony05/09/2019
Works great. I used this hardware to mount a ARB awning with ARB mounts to my Yakima jet stream cross bars. Couldn’t find these anywhere except at etrailer.com!! Fast, and I mean faaast shipping and excellent customer service. I don’t write reviews often, but when someone does something amazing. I gotta give them credit.
25
93
Show More Reviews
See what our Experts say about this Yakima Accessories and Parts
- Does the Replacement T-Bolt with Nut for Yakima Racks Fit HD and Overhaul HD RackYes the Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers # Y8880184 that you referenced would fit the top of the HD bars or the Overhaul HD rack.
view full answer... - Will Yakima T-Bolts Fit in Rhino Rack Roof Rack Crossbar ChannelsYes, the track/channel dimensions between the Rhino Rack and Yakima roof racks are the same dimensions so the Yakima T-bolts part # Y8880184 that you referenced will fit and work well.
view full answer... - Does Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers Fit Thule AeroBlade CrossbarsYes, the Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers # Y8880184 will fit in the channel of your Thule AeroBlade crossbars. We even had a customer review which states that is exactly what they have used this T-bolt for.
view full answer...
- Thickness of T-Bolt for Yakima Rack and Roll Trailers Y8880184The thickness of the T-bolt head of the part # Y8880184 you referenced is 5/32 of an inch. I attached a picture that has all of the other dimensions as well. These T-bolts are M10 x 1.5 x 25
view full answer...
- Will Yakima T-Bolts # Y8880184 Fit the T-Slot in Yakima JetStream CrossbarsThe Yakima JetStream crossbars have a T-slot that is 1 inch wide and 1/2 inch tall so any t-bolt used would have to fit within those measurements. The 4-bolt set of M10 x 1.5 x 25 bolts # Y8880184 will work since the head is 3/4 inches square but I cannot guarantee they will work with the ARB awning hardware.
view full answer...
- How Long Are the Bolts in the Yakima Replacement T-Bolt Kit?The T-bolts in the Yakima Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers # Y8880184 are going to measure 3/8" x 1" long. The next size up would be 3" long, but if you can let me know the product you're trying to replace the hardware for I may be able to find an appropriate hardware replacement kit for you.
view full answer... - Replacement Hardware to Attach Tower to Frame on Yakima Rack and RollIt sounds like you're looking for the Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers part # Y8880184 which are used to attach the towers to the frame.
view full answer... - Which Yakima T-Bolts are 3 Inches LongThe Replacement T-Bolts for Yakima Universal Mount Crossbar Clamp - Qty 2 # 8860061 are 3" and are designed for the ReelDeal and ShowBoat 66 carriers. These were the bolts you referred to.
view full answer... - T-Bolts that Fit Yakima Roof Channels on CamperYakima has the T-bolt kit part # Y8880184 which includes a quantity of 4 T-bolts that are designed to fit in the tracks of their roof channels like what you have. These come with lock nuts as well.
view full answer... - Nut/Bolt that Can Fit Yakima Roof Channels on Camper ShellThe Yakima roof channels are much bigger than what the # Y8880184 is designed to fit. The only solution would be the hardware bag part # Y8890028 which is the track nut and bolt that is designed to fit the channels you have.
view full answer... - Replacement T-Slot Mounting Bolts for Yakima HD BarsThe Yakima Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers - Qty 4 # Y8880184 will fit in the channels of your HD bars, but for the most part, crossbar mounted accessories will come with (or have available) T-channel hardware that will allow you to mount them on your HD bars. There's also the Eye Bolts for Yakima HD Bar, JetStream, FlushBar, and RailBar Crossbars - 250 lbs - Qty 2 # Y01162 you can use to secure loose gear like kayaks or ladders and mounts directly in the channels...
view full answer... - Replacement T-Bolt Hardware Recommendation for a Yakima FatCat Snowboard CarrierIt sounds like you are looking for the t-bolts that hold the snap around brackets for the Fatcat carriers like part # Y03088 that attach it to square bars. While the t-bolts aren't available separately the entire adapters are and aren't very expensive. For that you would want part # Y8860081. You will get a few spare parts with this kit as well.
view full answer... - Will The Yakima T-Bolts # Y8880184 or # 8860061 Fit Yakima HD Crossbars? The Yakima HD Crossbars # Y01159 have a 3/8" opening on the top of the bar which is 1/4" tall and 13/16" wide inside the slot opening. This will accept both the Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers # Y8880184 and the Replacement T-Bolts for Yakima Universal Mount Crossbar Clamp # 8860061
view full answer... - Is There a Longer Replacement T Bolt Than the Thule 853-5648The closest solution I can come up with for a longer bolt than the Thule Replacement Stainless Steel T-Bolt # 853-5648 is going to be the Yakima Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers # Y8880184. This replacement bolt has the same head size and thread pitch, but is 25mm long as opposed to the # 853-5648 which is 22mm long. When it comes to the difference between stainless steel and standard black steel (high carbon steel), it is not stronger, but it does stand up...
view full answer...
- Roof Rack T-Bolt Availability that Has Threaded Section that is Near 2 inchesThe part # 853-0782 sounds like what you are looking for. This is a similar T-bolt but the threaded section is 1-7/8 inches.
view full answer... - T-Bolt With Nut to Fit Malone AirFlow2 CrossbarsThere is a T-bolt that is threaded with a nut that will fit the Malone AirFlow2 # MPG215 roof rack; it is from Yakima and is the following part number: - Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers # Y8880184 These are 1 inch tall T-bolts and will fit in the Malone T-slots. While I can't absolutely guarantee they will work with your awning, I did want to at least give you the option if you want to try it out.
view full answer... - Does Rhino Rack RVP Roof Rack RRRVP05 Come with T-Bolts for Top ChannelsThe T-bolts that are designed to fit into the top channels of the Rhino Rack RVP roof rack part # RRRVP05 would come with the roof rack carrier that is designed to fit these bars. This is because the T-bolt needs to be able to attach to the carrier which will be a slightly different setup. So while we do carry T-bolts like the #Y8880184 that would fit we can't guarantee these would work with what carrier you had in mind.
view full answer... - Will the Rhino Rack Antenna Mounting Bracket Fit in Yakima T-SlotsT-Bolt channels on crossbars are typically all roughly the same size, so the mounting hardware that comes with the Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms - Channel Mount - Folding # RR43196 can also be used in Yakima T-slot channels. You won't need the Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers # Y8880184, but they would also work for this application if the hardware was not included. When it comes to the dimensions, I've listed those below but...
view full answer...
- Will Replacement M8 T-Bolt for Thule TracRac and Xsporter Ladder Rack Fit Yakima HD Load BarYes, the Replacement M8 T-Bolt for Thule TracRac and Xsporter Ladder Racks # 853-5715 that you referenced is an M8 T-bolt. It also would fit into the top channel of a Yakima HD load bar.
view full answer... - Will the Yakima SlimShady Mount Bracket Fit an ARB Awning and Yakima Round Bars?I can't confirm the fit as we don't have the ARB 2000 awning to check. I can confirm that the Replacement Clamp Assembly for Yakima SlimShady Roll-Out Awning # 8880737 and the Replacement Mounting Bracket for Yakima SlimShady Roll-Out Awning # 8880736 will work well together and provide you with a solid connection to your Yakima round crossbars. The channel dimensions of most products are similar with the T-slot that found on the Yakima Jetstream Crossbars that have a slot that is 1...
view full answer...
- T-Bolts Needed For Yakima Jetstream Crossbars For Custom Mount AccessoryThe T-bolts for Yakima Jetstream bars are one of the following; the Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers - Qty 4 # Y8880184, or the Replacement Long Mounting Bolts for Yakima MegaWarrior and LoadWarriorCargo Baskets # Y8870068. These bolts are 3 inches long. A third option is from Thule and is the Watersports Adapter for Aeroblade/Aeroblade Edge Bars # THXADAPT11. All of these will require some customization as there isn't a kit for your Hobie Pro Angler Cradle...
view full answer... - Recommended Bolts for the Channels of a Yakima LockNLoad Platform I checked with Yakima and the correct bolts for LockNLoad Platform Racks like item # Y05045-39 are M8 T-Bolts like item # 853-0782. The Replacement T-Bolt item # Y8880184 you were looking at are M10 bolts and wouldn't work. Any extra length of the Replacement M8 T-Bolt # 853-0782 can be cut off.
view full answer... - Longer T-Bolt that Fits Top Channel of Rhino Rack Vortex CrossbarsWe have the longer Thule T-bolts part # 853-0782 which also fit the Rhino Rack crossbar channels. We have knobs for them as well with # 753-0776.
view full answer...
- Correct Bolt and Nut for the Channels of a Yakima LockNLoad Platform CarrierI do have an option for you, but I contacted the manufacturer about whether the Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers # Y8880184 will work with a Yakima LockNLoad platform like the # Y05045-39. They informed me that the LockNLoad's use M8 bolts and the Rack and Roll uses M10 bolts. Instead you can use the Replacement M8 T-Bolt # 853-0782 and either the Zinc Plated Hex Flange Nut - M8 # 185917 or the Replacement 3-Wing, High M8 Hand Knob # 753-0776 for a nut. Any...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Written by:
Laura H
Updated by:
Wilson B
Updated by:
Brian T
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
2/5/2024
I want to help to make sure that you have the hardware that you need. Are you using these t bolts with your Yakima Rack and Roll trailer?