Replacement T-Slot Nuts & Bolts Hardware For Yakima Landing Pad 1

Question

Question:

I need replacement t-slot nuts and bolts for my yakima skyline foot pack. To attach to my pace edwards ultragroove t-slot side rails. Set of 8. You guys sell these?

asked by: Mike J

0

Expert Reply:

To mount Yakima SkyLine towers in your UltraGroove the foot pack is the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221, and the correct replacement hardware with the T-slot nuts and bolts for this foot pack is the following:

- Replacement Hardware Bag for Yakima Landing Pad 1 # Y8890028

You'll need a quantity of two of the # Y8890028 for all four feet.

expert reply by: Kyle S

0

Answer 1

The difference between Landing Pad 1 #Y00221 and Landing Pad 4 #Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different…

view full answer...

Answer 2

You are correct, it is the Yakima Landing Pad 1 part #Y00221 that is compatible with the Truxedo Elevate TS rails.

view full answer...

Answer 3

I checked directly with Yakima, and the shortest crossbar size for the OverHaul HD ladder rack on a 2021 Ford F-150 is indeed the 68 inch bars, and they say the 60 inch bars will not fit as they are too short. So the correct fit for your '21…

view full answer...

Answer 4

The Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600 will work great with the TS (T-Slot) Rails for Truck Hero Elevate Rack Systems like part #TH75FR on a full size truck. The crossbar spread can then be adjusted to fit pretty much anything…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 10

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 11

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 12

Yes, the Roamer LT Roof Rack for Pop-Up Campers and Camper Shells #S80510 will fit your 2023 Forest River Flagstaff 176LTD. It is also what I recommend to add a roof rack for a bicycle carrier on your camper. Once installed you will be able to add…

view full answer...

Replacement T-Slot Nuts & Bolts Hardware For Yakima Landing Pad 1

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching