To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.
Features:
Yakima HD Crossbars - 60" Long - Black - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2016 Hyundai Santa Fe, we're going to be taking a look at and installing the Yakima BaseLine Roof Rack System with CoreBars. That consists of the 60" Yakima CoreBars, part number Y00422, the BaseLine Towers, part number Y00146, and the BaseClip Fit Kits for Hyundai Santa Fes, part number Y06130 and Y06133. This heavy duty, yet quiet, roof rack system maximizes the carrying capacity of your Santa Fe. The aerodynamic teardrop shape controls air flow to minimize wind noise and vibration. These steel crossbars are going to allow you to attach a wide variety of accessories to your Santa Fe's roof, such as bike racks, boat carriers, and roof mounted cargo baskets. The BaseLine towers are going to support our CoreBars and the BaseClips are going to provide a custom fit to our Santa Fe. For more security, you could pick up the Yakima Same Key System Lock Cores with part number Y07204. It's an easy installation. We'll go ahead and show you that now.
I've already got the front one installed on my Santa Fe. Let's go ahead and do the rear together. The driver and passenger side install the same way. Let's do the passenger side. First thing we'll do, let's go ahead and grab out baseline tower. Then, I'm going to grab our CoreBar adapter, and we're going to snap this in place.
We'll just take our two thumbs and push it down until we hear two clicks just like that, so it's going to be in there nice and solid. Then, let's go ahead and take off the cap here. I'm going to squeeze in on both sides and remove that. Then, we're going to pull out on this little door here. Now, let's grab our CoreBar attachment. When we put this on we want to make sure that it's facing the same way so it can easily slide on to our CoreBar, so we're going to put it on in this direction.
We're going to set it right on top, and then we're going to hold it in place, turn over our BaseLine tower, and we're going to tighten up that bolt through there. We'll grab our included Yakima tool. We're not going to tighten this down all the way just yet. Just get it started. With it loosely installed, let's go ahead and slide it on.
Then, we're going to turn the whole bar over. Now, once we've got it slid on, we'll need to refer to our instructions on the measurement between the two. We've got a little arrow on our bar here. That's going to be our center. Then, I'll just tighten it down. Now, we'll need to refer to our instructions on which one of the three tilt settings we need to be at. Then, we can just tighten it down. What we need to do is listen for three clicks with our included Yakima tool. There's two and one more. With that tightened up, let's go ahead and flip it back over, and we're going to close our little door. Then, we're going to open up our second door here. We'll grab our clip, and I'm going to slide it in place underneath, so it kind of hooks into place. Then, we can turn it back over and adjust our angle. Now, our angle gauge is going to be located right here, so once again we'll need to refer to our instructions. As you can see, we need to choose one of the three. Then, we can just tighten it down. Again, we're going to be listening for three clicks. Now, let's install our pad. It's got a little arrow located in the center. We'll need to make sure that it's facing out. We're just going to be clip it in place here. Just give it a good push, make sure it snaps in to both sides and that it can still move. Now, let's put on our end cap. Now, let's set it in place. You want to be sure and open up both doors. Then, I'll just gently set it in place. Now, we'll need to refer to our instructions once more to set the distance between our two bars. Once we've done that, we can locate the screw here. We'll take our included tool, and we're going to tighten this down. Now, as we do that you can see how it's drawing in our clip. Once it makes contact, we're going to come underneath here and tighten this down until the bottom makes contact. Then, we're going to do the same for the other side. Once we've repeated the same process on the other side, we'll make our way back over here and we're going to torque it down to the three clicks. We'll do the three clicks to this one as well. We'll close up the door and we'll repeat the same process for the other side. With everything torqued down, we can go ahead and replace our cover. With that done, we're all set. It looks great. That's going to complete our look and installation of the Yakima BaseLine Roof Rack System with CoreBars on our 2016 Hyundai Santa Fe.
Average Customer Rating: 4.7 out of 5 stars (223 Customer Reviews)
Heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
etrailer was a great place to order, quick and easy. Yakima products however are over priced and overly complicated.
Follow the instructions, and you can't go wrong on the self installation
These adapters were easy to install and made my system fit together nicely.
Great product, as are all Yakima products,in my opinion. These are on a Yakima system installed on my Diamond Back tonneau cover. Very pleased with them
Really easy to install & work as specified. So happy with the customer support/service at etrailer.
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.
We purchased the rack 5 weeks in advance of our up and coming trip. (Rack is amazing FYI). However, The website states free shipping over a certain amount. Weeks went by with notifications nothing was sent and the order kept being pushed back.
Once I called I was told those who chose to purchase shipping vs opting for the free shipping got their orders firsts; everyone else fell to the bottom. After waiting a month for “free shipping” I opted to have paid shipping and I received the rack within days.
While this company has many products I could use, I refuse to use them again because what is advertised is NOT what they ethically hold themselves accountable too.
Arrived as part of a set of components for a roof rack and kayak carrier. I liked that etrailer had a guide to get the right components to fit my car's make and model year. This baseclip set arrived quickly, but the set for the rear of the car that arrived with them were obviously returns that had not been inspected. That set was missing parts, requiring follow-up calls to arrange for a new replacement for the incomplete set, and about a week's delay in getting the rack up on the car.
Ackage came 2 days early the install was somewhat easy (did it by myself)
Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.
I had a difficult time identifying whether these were the correct adapters for the rack towers that I was purchasing to fit my tracks but that has more to do with yakima doing everything a-la-cart instead of having kits that include everything you need if I hadn't already had the HD bars on my other rack and wanted to be able to transfer them to this rack I probably wouldn't have went to this expense because I think they are overpriced.AS far as etrailer is concerned I always receive great service and products and they are always well packaged and never damaged by poor delivery care and always fast delivery speed.
While putting the roof racks together, one needs to pay close attention to the detailed instructions; but, so far, the equipment is working well with a good fit on my Toyota highlander—I’ve traveled some 1000 miles so far.
Your service is nothing short of excellent! Thank you
Yakima OverHaul HD is built tough, sturdy, light but heave duty, well designed, easy to install and remove by leaving the locking base on the track. The height can be adjusted easily to a desired height to fit just right. The "bonus" is a beer bottle opener on each rail :)
Customer service at etrailer is excellent! Always responsive, immediately reply to help with any questions. Tayler K. was my sales representative, she's been super!
Great product and even better was the service with etrailer! These guys make it happen and delivery was super fast. Thanks for a fantastic experience, will be a return customer.
Yakima HD bars 60”
2018 Ford Expedition
Solid build quality and easy installation on my '21 Mazda CX-5.
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.
Well packaged and on time
The Yakima products are doing great. Just got home yesterday from a 18 day trip using them in Michigan's upper peninsula. Love them. Great products. Thanks again.
The Yakima products are doing great. Just got home yesterday from a 18 day trip using them in Michigan's upper peninsula. Love them. Great products. Thanks again.
These are some heavy duty crossbars.
Owned several surfboard racks in 45 years and these are by far the best.
Great tie downs also.
Required for Yakima HD crossbars using timberland tower system.
Great company. Fast delivery.
Solid and well engineered product. Trevor provided excellent support and service in selecting and ordering to ensure the right solution.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.