To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars include built-in C-channels for mounting Rhino-Rack heavy-duty, contractor-grade accessories.
Features:
Rhino-Rack HD Crossbars - Silver - 54" Long - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on this 2010 Chevrolet Silverado we are going to install a roof rack from Rhino Rack. We will be using part number DA1375 for the crossbars and it is their elliptical design. And we will also use the pad and clamp kit part number DK227. We have our bars already assembled. We measured out our front rail at 118 millimeters. We measured from here to the inside edge here. And our measurement for our back rail is going to be 109 millimeters. Alright, we have our bars set up. Let us go ahead and start installing the front crossbar. Measure the center of the door jamb to the center of the crossbar. We are going to measure out 9-27/32. 0:38
Once we have our first rail installed, we will go ahead and measure from the center of that one to the back rail. And that measurement will be 31-1/2 inches. Then you go ahead and tighten them down. Using the included tool that comes with the roof rack, we will just snug them down on both sides. Once we have the Rhino Rack installed, we will go ahead and put the covers on the legs and lock them down into place. Alright, with a few easy steps, our Rhino Rack is already installed on the vehicle and ready for service. And there you have it for part number DA1375 and we also used the pad and clamp kit part number DK227.
Average Customer Rating: 4.6 out of 5 stars (113 Customer Reviews)
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars include built-in C-channels for mounting Rhino-Rack heavy-duty, contractor-grade accessories.These are the perfect racks for a low profile mounting of solar panels on my Sprinter van.
This works great. Very strong and reliable. Holds my ladders with ease. I’ve had it loaded down and done 80mph on the highway no problem.
The Rhino 2500 series is well built. The etrailer customer service person Trevor W. was great. He was so helpful in getting the right components for my Rhino 2500 roof rack to mount to my 2010 Silverado. Thanks for the help Trevor.
The rack fit well and was easy to install. Seems to be made well. The problem is the amount of road noise. I never even put the basket on. It was so loud, it roared. I repositioned it several times but the noise was way too much and I finally just removed it. I spent a lot of money for the rack and the basket and now they are in storage. I wish it would have worked out better because I thought it looked really good.
Solid product that fit well with the other components.
Ordered a Rhino Rack for my 2014 GMC Sierra 2500HD Denali. Rack arrived in very good shape and all items were there. Installing at this time and see no problems ahead.
This rack works perfectly on my Nissan Versa for carrying my two Perception Sound 9'6" kayaks. The Rhino-Racks look good to me. The kayaks can rest directly on the rubber pads on the rails, unlike the Yakama racks I had in the past that had bare pipe rails. Also, I expect I can buy parts to adapt this product to a different car without having to buy new towers. I am sorry there are not hooks or loops to attach bungees when carrying lumber. They are noisy in the wind, but less so when carrying the kayaks.
These made it easy for me to mount a roof basket on top of my truck without drilling holes. This is a great product.
Thanks to Etrailer, I am ready to do some serious summer exploring with my 2013 Mazda 3! Rhino Racks, Malone top box, and Kuat bike rack!
Repeat customer of Etrailer. Always great service and support. Here, acquired parts to reconfigure Rhino Racks to fit another truck after a trade. Made the switch seamlessly and racks are now mounted on the new truck. Use them to transport a racing sailing skiff that is not heavy but is bulky. They have moved the boat to regattas around the country without issue. Excellent product.
Customer service was very helpful making sure that the correct racks were ordered. Shipping was very fast and tracking package provided up to date info regarding arrival of package. The racks were exactly what I wanted and I am very happy with the product. Will definetly consider etrailer for other products in the future.
Mounted on 2001 GMC Sierra 2500HD. Excellent fit. Looks clean on truck. Sturdy. Small amount of noise. I would buy again and recommend to others. Price far better than some of the big names for the same quality.
Good quality and locks are included. The plastic lock covers are flimsy but they will keep an honest person honest.
Thank you for the very speedy customer service! My roof rack is already here!
After a year of use I can say that this rack and it's fit kit is not bulletproof, but it's darn close!
I give it 4 stars because it is not obvious what is loose if one of the feet start to creep on the roof. WHEN YOU DETECT CREEP BE SURE TO CHECK ALL OF THE CONNECTORS ON THE BAR! Not just the one that "must" be loose!
It took me about 2 months to figure this out and the rack is a design forgiving enough that after about 2,000 miles I still have an undamaged kayak and roof!
A year ago we purchased this Rhino roof rack system/kit to carry our 15ft canoe and 12ft kayak on our Silverado crew cab. We tow a retro camper, carry bikes, and have a toolbox in the bed, so the truck roof was our easiest option. We also bought removable Yakima folding kayak holders (because the beam width of our two boats was too wide for the cross bars - need to carry them on their sides). I appreciate the build quality, the sturdy finishes, the strong materials and smart design of this rack. We followed the enclosed directions and the etrailer installation video and it was easier and faster than we thought. We've logged thousands of highway and north woods miles with this rack and it's still solid as a rock! Only one minor issue... the square Euro cross-bars create wind noise at highway speeds which is only noticeable when you're not carrying canoes (they make enough wind noise on their own!). We just remove the racks when we don't use them - only takes 5 mins. It's a great product and we expect it to last for many more years! Great service from etrailer as well!
I got the roof rack mounted anyways. Better pics to come when it's all finished!
Assembled and installed the roof rack today. I used your websites video's to guide me. Didn't have any problems, everything went smoothly. Highly recommend this company. The product was very well made.
Great product everything fit perfectly. With the heavy duty bars almost all the hardware for anything you put on the rack is too short
Johnathan W. was very helpful giving me advice with the situation I had, carrying our kayaks while pulling our 5th wheel. He recommended the Curt Front Mount Hitch Receiver Custom and a Thule Goal Post Hitch Mounted Load Bar (which I already had). I also purchased a Rhino Rack Square Bar Roof Rack. I received my order promply. I installed both products ( with the help of my 8 year old grandson Hayden ) I am very happy with the quality and easy installation of all products i have ordered from etrailer in the past. I will continue to do so in the future. Now we will be able to take our kayaks while pulling our 5th wheel. Thank-you etrailer!
Fit and function perfect. I use this to carry 2 kayaks on top of my Chevy Silverado 2500HD while towing my camper. No issues.
I was in a roof rack jam. There was a national shortage of the rack I needed for my car and our summer vacation was a week away. I went to etrailer.com when I couldnt find the roof rack anywhere else on the web. Another website actually suggested that they might have what I needed.
I spoke to Ashley E on the phone to make sure that I was picking the right parts. Ashley was very helpful and knowledgable. She helped me find the right roof rack and made sure that I received it in record time. I am a customer for life!!!
While the quality of all the parts I received and the service I got deserved 5 stars, the fact that the clips which hold the rack onto my roof don't fit (and I was assured they would) gets etrailer 3 stars. My truck is a 2006 Silverado 3500 extended cab and the brackets will not fit over the door rubber and slip under the steel rain gutter. I was told these should fit and they are the only clips they have. Looks like I will have to modify them myself to get everything to work.
This rack worked out great... I installed in on a 2017 Ford F-150. We drove 6 hrs through wind and rain with a SUP and Tandem Kayak on top. It really took a beating in a storm the whole way. One bracket was a little loose and shifted because of the wind on the Kayak, but it held together. Super happy with Rhino rack!
Assembly directions were explanatory - the sub-assemblies done at the warehouse made it even easier. The parts went together with no effort. I have a 11.5 foot, 65-lb. kayak that will be carried on the roof rack whenever I travel over 30 miles. I normally tie it down in the truck bed for trips under 30 miles. I have a tri-fold cover for my truck bed and the Rhino Rack 2500 allows me to use the truck bed for gear that can be stowed there on extended fishing trips.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.