LaSalle Bristol RV Waste Valves - Elbow - Rotating - 3" Spigot and 1.5" Hub to 3" Lug

Video Transcript for LaSalle Bristol RV Sewer - Waste Valves - 34466ND13BAR Review

Speaker 1: Today we're taking a look at an RV waste valve. This RV sewer elbow combines an 1.5 inch waste valve and a 3 inch waste valve. It can be used as a replacement or to upgrade your existing setup. The elbow merges the flow of waste from your black water tank and gray water tank. It does feature the rotating valves, which offer easy handle access at the mounting locations, so you can position the valve at the desired angle during you installation to make sure that your handle's always easily accessible.These valves are able to rotate 360 degrees, that way they can be positioned exactly where you need the handles for your application. On this end, we have the 3 inch spigot that slide onto or into your RV's black water line, so a spigot slides into your RV's black water line.

Outer diameter on that is about 3.5 inches. On this side, we have the 1.5 inch hub, which slides over your gray water line. The inside diameter on that is about 1 and 7/8 to 1 and 15/16 of an inch. Right here, we have the bayonet-style cap that covers the lug fitting when it's not in use, so you can rotate that off easily. This lug fitting allows you to connect directly to a sewer hose that has a bayonet-style connector.

It also had the integrated strap on the cap to keep it connected to the valve so you don't misplace it or lose it.The unit's constructed from a durable ABS plastic. You will need some ABS solvent cement, which is required for installation. It's sold separately and available at etrailer.com. You also have gray and black handles or easy identification of the valves, and the product's made in the USA. To open and close the valve, you can use the included V-handles which are attached to a metal shaft.

The unit is also equipped with the appropriate seals in ensure leak-proof performance.That's gonna do it for today's look at this RV waste valve.