Double RV Waste Valves - Elbow - Rotating - 3" Spigot and 1-1/2" Hub to 3" Spigot
(8 reviews)
Price: $46.06
In Stock
Double RV Waste Valves - Elbow - Rotating - 3" Spigot and 1-1/2" Hub to 3" Spigot
Item # T81A
Retail:$74.55
Our Price: $46.06
You Save: 38%
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (8)
- Q & A (0)
- Photos
Valterra RV Waste Valves - T81A
- Double Waste Valve - Manual
- Sewer Elbow
- 3 Inch Spigot
- 1-1/2 Inch Hub
- Valterra
- Rotating Valve
RV sewer elbow combines rotating black-water and gray-water waste valves. 3" Spigot slides into black-water line. 1-1/2" Hub slides over gray-water line. 3" Spigot slides into a separate sewer line.
Features:
- RV sewer elbow combines a 1-1/2" waste valve and a 3" waste valve
- Can be used as a replacement part or upgrade your existing setup
- Elbow merges the flow of waste from your black-water tank and gray-water tank
- Rotating valves offer easy access at mounting location
- Position valves at desired angle during installation
- 3" Spigot slides into your RV's black-water line
- 1-1/2" Hub slides over your gray-water line
- 3" Spigot slides into a separate sewer line
- Durable black ABS plastic construction
- ABS solvent cement (sold separately) required for installation
- Gray and black handles for easy identification of valves
This RV sewer elbow with rotating valves is a part of your motor home's waste management system. The elbow combines the flow of wastewater from your gray-water tank and your black-water tank. And the valves can be rotated as desired during setup to make it easier to reach.
T81A Valterra Motorhome Sewer Elbow w/ Double Rotating Valves - 3" Spigot x 1-1/2" Hub x 3" Spigot Outlet
Customer Reviews
Double RV Waste Valves - Elbow - Rotating - 3" Spigot and 1-1/2" Hub to 3" Spigot - T81A
Average Customer Rating: 5.0 out of 5 stars (8 Customer Reviews)
RV sewer elbow combines rotating black-water and gray-water waste valves. 3" Spigot slides into black-water line. 1-1/2" Hub slides over gray-water line. 3" Spigot slides into a separate sewer line.by: Andrew 08/31/2023
We received exactly the parts that we needed, Thank you!
by: Bruce 03/22/2021
We did a remodel of a fifth wheel into a mobile clinic. IT required a complete re-plumb including the tanks. We needed to alter the grey and black tanks outbound water and this worked really well.
by: Kevin 09/10/2020
I have not installed it yet but I could not get it any faster from anyone else. Price was as good as anyone else’s also. Paid a little extra to get it faster and received it as promised. Overall I had a great experience with Etrailer’s services and products.
by: Michael07/31/2019
Received today and looks like exactly what I need. Haven't installed....will probably have my plumber come to install.
C.S. was excellent and I was very happy with the quickness in the shipping and receiving of product.
You on-line catalogue is great and very reasonably priced.
Very, very happy.
Mike Cochran
by: James05/29/2019
Valves worked great, exactly what I needed
by: Joseph04/06/2024
by: Brenton05/07/2021
by: Tammy 05/10/2021
8
8
See what our Experts say about this Valterra RV Waste Valves
- Double Waste Valve with 3 inch and 1-1/2 inch Hub Fittings On Both EndsBased on what you mentioned it sounds like what you are looking for is the Bristol Double RV Waste Valves # 34466ND14AAR. This has hubs on both ends of it for a 3 inch and 1-1/2 inch pipe. Since it's a hub that fits over the 3 inch pipe it would have an outer diameter of 3-1/2 inch like you are looking for. The center fitting is a 3 inch spigot which means it fits into a 3-1/2 inch pipe. Hubs fit OVER pipes and spigots fit IN to pipes.
view full answer... - Difference Between Valterra # T81, # T81A, and # T81B Double RV Waste Valves The difference between the three Valterra Double RV Waste Valves referenced in your question has to do with their fittings, specifically their use of hubs or spigots. Basically a spigot (also referred to as the "male" fitting) will go inside of a hub/socket while a hub (female) goes over a spigot. The particular waste valve you need will be specific to your application and existing setup. The Valterra # T81 has a 3 inch hub and a 1-1/2 inch spigot. The Valterra # T81A has a 3 inch spigot...
view full answer... - What is Difference Between Valterra RV Waste Valves T80 and T81The difference is the connection the two valves make after the valves come together. The part # T81 uses a spigot connection for a permanent install and the # T80 uses a bayonet style fitting which allows for easier connection and disconnection.
view full answer...
Do you have a question about this RV Waste Valve?
Info for this part was:
Expert Research:
Jameson C
Written by:
Amy B
Updated by:
Cody B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.