Valterra RV Ceiling Vent w/ Rotating Grille - 4" Diameter - Black

Video Transcript for Review of Valterra RV Vents and Fans - A/C and Heat Registers - A10-3356VP

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Valterra 7-inch diameter black rotating RV vent register. Now this rotating RV vent register will direct the flow of air from your heater or air conditioning. It does use a louvered grill that'll rotate a full 360 degrees and it is designed to fit into a 4 1/4-inch diameter duct opening. It is a plastic construction to avoid rusting and rusting stains. And the bezel portion right here is designed to mount into the wall or the ceiling using the included hardware, which is four screws.

It is a nice black color. It is made in the U.S.A. Few dimensions on this, if we measure it, the overall dimension from this side to this side is gonna be, got it, 7-inch diameter. Total depth when this is installed is gonna be from here to here. So if we put the measurement on that, it's gonna be right at 3/4 of an inch deep.

Now the mounting dimension, which is gonna be pretty much the cutout dimension, which is in the very back here, that's gonna be right at about 4 5/16 inches. And the mounting holes, if you can see, there's four of them right here. And if you measure those center to center, they're about 4 inches by 4 inches. And then straight across, center to center on the mounting holes is about 5 5/8 inches. But again, just to show you how this will rotate you can see the grill portion right here.

You just rotate it to whatever direction you want. But that should do it for the review on this Valterra 7-inch diameter black rotating RV vent register..