Ceiling Garnish for MaxxAir MaxxFan RV Roof Vent - Black

Video Transcript for Review of Maxxair RV Accessories - Vent Fan Ceiling Garnish - MA10-20209

Michael: Hi there. I'm Michael with etrailer.com. Today, we're going to take a quick look at the ceiling garnish for your Max Air Max Fan RV roof vent. So basically what this is going to do, it's going to fit up inside the hole in your RV's roof, where you're putting your vent fan and it's going to give you a nice surface on the bottom there so that it's going to clean up that gap. This is right about 16 and a quarter inch outer diameter. The internal diameter is right about 13 and a half inches.

So it's going to work with almost all your openings, including all your Max air Max fans. The flange itself is by design, it's about five and three quarters of an inch. However, this can be trimmed down. We just use like a box cutter knife, would trim pretty easily. You just want to try and be as straight as possible or follow the roof line if your roof is slanting.

Very easy to trim down, but you'd have a little bit of room there, some adjustability depending on the spacing of your roof.The visible portion, it's going to be on our ceiling, is going to be one and three eighths of an inch. As far as our mounting holes, the two that are on the same side are going to be 12 inches apart, probably help you if I hold this tape measure right side up, right about 12 inches. And then the ones going across the openings from each other and center to center are going to be about 15 inches. This is black as you can see. We do also have other color options to better suit your RV style interior colors.

So take a look those here at etrailer.com if this is not going to be the part that you need. That's going to complete our look at the ceiling garnish for your Max Air Max Fan RV roof vent.