Summer Starts Here - Save up to 70%
If you're having trouble finding just the right weather stripping for your RV slide out, this will get you a custom fit. This wiper includes a track for a C-channel bulb seal in the height you need. Easy installation with peel-and-stick adhesive.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we take a look at this 30 foot long stick on rubber wiper seal with the track for your RV slide out. Now this rubber wiper seal with the track on it is used to prevent water and pests from getting into your living area on your RV. The wiper seal itself will flex in or out depending upon how the slide is moving, so it is ideal for Jayco Eagle Fifth Wheels and other RVs. Now we mentioned this integrated track right here you can see. This'll create the installation point for your bulb seal to install on to help seal against the RV when the slide out is closed.
And this part here is compatible with the one inch and one in three 16th inch channel bulb seats, which we do sell separately on our website. Their part number is SR84FR and SR37FR, and they are listed on this product page as a related product. Now this is a EPDM dense rubber construction, won't shrink, crack or fade over time And this is resistant to UV damage. You can see on the bottom here, they use a peel and stick installation, has this pre-applied 3M adhesive backing here. You simply just peel off the backing paper and then apply the seal to the RV frame surrounding the slide out.
You can use scissors to trim many extra seal. Again, just wanted to show you the cutaway on this. Sort of gives you an idea. Have your track up here. Tape down here, little ridge right there, and then a little ridge right on the edge here.
Dimensions on this again, is 30 feet in length, and the width of this seal is two and 13 16th inches. And this part is made in the USA. But that should do it for the review on this 30 foot long stick on rubber wiper seal with the track for your RV slide out.
Average Customer Rating: 4.6 out of 5 stars (115 Customer Reviews)
If you're having trouble finding just the right weather stripping for your RV slide out, this will get you a custom fit. This wiper includes a track for a C-channel bulb seal in the height you need. Easy installation with peel-and-stick adhesive.Very good rubber and strong.
Good job
I bought these wiper seals for my cedar creek fifth wheel. After installation I tried to slide my slides in and they tried to cock from one done to the other and did not come in smoothly or completely. These are made out of a different type of rubber that is very stiff so they don’t fold into the slide while moving slide in. I am out the price of a 30’ roll and cannot return because I used part of it. Beware of Steele wiper seals
Perfect fit! As usual, E-trailer had what I needed at a good price, very fast shipping!!! Reason why I buy all my trailer parts from them, makes it easy to keep my customers happy.
Hi, George: The rubber seal for my slide-out that you ordered for me worked-out just fine giving the slide-out a tight seal to keep rain out. Thanks, again, for such good customer service & even checking back after a year to see if I was satisfied.
Wiper seal was a good product but did not work on my slide. The seal was too thick and would not fold under when retracting my slide. I had to discard it and go another direction
I used the wiper seal for the horizontal seal (top) on my slide out that is 13 ft long on my cedar creek fifth wheel.
The rubber is so stiff it won’t flex and move properly when the slide is brought in. It is supposed to fold into the slide when the room is brought in for travel and prevents the slide from tiltin in at the top. Because I installed this seal I cannot get my money back. Not very happy.
You sent us 2 seals were wrong but it was our fault. Then we just got the correct seal today and postal delivery was 14 days. Your accepting the wrong parts and returns went well. Now with warm weather we can proceed with the fix. Thanks for your help.
it
Very good seal, has not deformed or tore over the last year. The seal also stays stuck in place.
Thank you so much for helping me get the right stuff
Easy to work with
The seal was easy to install and worked great.
Exellent produit et service
As expected
Worked great. Easy to install.
After one year, still good to go. etrailer is the Best!!!
Good wiper I liked the heavier bottom, I wish it would be tracked for a D bulb but I don’t see any 4+” wipers with D bulb tracks
I wasn't sure this product would work for me because it wasn't the exact size that I needed but knew I could trim it to the proper size. I got it to replace the weather seals on our travel trailer slide out. The new weather seals were much heavier duty than the originals. You must make sure the residue from the adhesive on original seals is completely removed and the area cleaned with alcohol. looks good and they work as intended. Very pleased with the results. These will last for the rest of the life of the trailer.
Easy install , like new again .
Great product. Will install tomorrow in the morning, in the Shade!! Quick shipping.
These were a great replacement for the rubber seals that were worn on our RV slide out. They were easy to install and fit great.
Purchased this item and SR79FR Bulb Seal for my 2011 Outdoors RV Wind River 2702BS. These items were a perfect match to the original and pretty easy to install. The bulb seal was a little more difficult than the wiper seal. Helpful hint clean out the rail that the bulb seal slides or pops into. I was surprised at the amount of dirt and build up inside the track. I used a little white grease in the track and it made popping the bulb seal in much easy. The wiper seal just clips over the metal flange. I used a rubber mallet and small block of wood to make sure the c-clip sealed on the flange. A great product from Steele Rubber Products and great service and price from Etrailer.
The rubber is of a good quality it hasn't started to shed black when you rub against it or leave black streaks on my unit, the only problem I have had in the stick on tape isn't of a long lasting material and starts to release after about 4 months so we removed the seal and used a automotive weather strip adhesive and so far it's been working well.
Same service as always.Great.The slide seals were easy to install and replaced the worn seals.Allison was also great help.
They do not hold themselves securely in place. Needed to add some self tapping screws. The manufacturer said adhesive was not required.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.