Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hybrid RV bathroom faucet has a maintenance-free ceramic disc cartridge that prevents the faucet from dripping. Low-flow aerator helps conserve your water while you're soaping up your hands. Pop-up drain (sold separately) can be added.
Features:
Specs:
This faucet lets you upgrade the bathroom faucet in your RV or camper. Using the inlet shanks, drop the new faucet in place through the mounting holes of your existing faucet. Then tighten the included mounting hardware. Finally, connect the hot and cold water lines. The use of tub and tile caulk (not included) is required.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Phoenix faucet single handle RV bathroom faucet. This unit adds or replaces a bathroom faucet in your RV. The single lever handle gives the unit a very nice look, very easy to use, very functional. This faucet's going to be what's known as a hybrid faucet meaning it's constructed of plastic and metal. The shanks here are going to be constructed of a brass construction. They're going to feature a polymer lining. Basically the unit like the base, the stem, the handle, the main portion of the spout, that's all metal.
This piece right here, it's going to be a plastic piece. That's just this internal piece here. Internal components is going to be a combination of plastic and metal. The backing plate, the threaded mounting nuts, that's plastic. Again, hybrid construction means both plastic and metal construction.
It feels like a really nice, well-built heavy-duty faucet. I really like the metal construction on the outside. It makes it feel like it's all metal but again, it is hybrid. The unit's going to feature a low-flow aerator that has a flow rate of 1.5 gallons per minute. A really nice design. This unit can be used with a pop-up drain.
Here on the back it's got the area for the drain pin to come through. That's where that would install. Drain assemblies are sold separately. They are available at etrailer.com. The unit's going to feature a nice chrome finish, gives it a really nice clean look. When it comes to the mounting area, that's going to require two holes for your installation.
Your holes need to have a diameter of 1 inch and they're going to need to be separated on center by right on 4 inches. These connection points are going to measure about 2 inches long. These are going to be the connection points for the hot and cold water lines. I also want to point out that right here it has a blue and red indicator. That's going to indicate hot and cold. These are going to have an outer diameter of 13/16 of an inch with an inner diameter of 1/2 inch. If we take a look at just the base of the unit front to back, we're looking at about 2-3/8, 2-5/16 of an inch, right in that area. Going this direction the base is going to give us a measurement of right around 6-1/4 inches. I also took an overall height so what I did was I put this on a countertop. I measured from the countertop and from the bottom of the base to the tallest point of the faucet which on this one is going to be the handle. I got a measurement of around 6-5/8. I also took a straight line measurement up and down from where the water would come out to the countertop height and that gave me a measurement of around 3 inches. The overall depth of the unit from very front to very back measured around 6-1/4 inches and then I also measured from the center of the base or the center of where it mounts to the center of where water comes out and got a measurement of around 4-5/8 of an inch. A very simple installation. Again, it does come with the backing plate and it's going to come with rubber washers. The unit would go through the mounting surface and on the underside of the mounting surface is when you would install the plastic mounting nuts. That's going to secure everything for a nice and tight installation. Again, the hybrid construction is very nice. Completely lead-free design and it has the feel and functionality of a fully metal faucet but it's also light weight and perfect for use in your RV or camper. That's going to do it for today's look at the Phoenix faucet single handle RV bathroom faucet.
Average Customer Rating: 4.9 out of 5 stars (201 Customer Reviews)
Hybrid RV bathroom faucet has a maintenance-free ceramic disc cartridge that prevents the faucet from dripping. Low-flow aerator helps conserve your water while you're soaping up your hands. Pop-up drain (sold separately) can be added.This works perfectly in my motorhome. Great replacement for my bathroom faucet.
Very substantial faucet for a camper! Customer service at Etrailer is second to none & we are very pleased with tbis purchase!
Very easy install and works great!
Installed no problem. Like the metal feel waaaaaay better than standard plastic ones. After install loaned rig to my brother. The fittings were leaking the whole time. Just check and recheck water lines for tightness and leaks until the seals settle.
Fit & Finish is very good. Unlike OEM, this Faucet feels sold like a Faucet should. Installation is as easy as it can be.
Our new faucet is working fine; looks great and no problems!
This was a perfect replacement for a faucet that broke. Very high quality faucet.
Good quality. Works well. Looks good.
Both faucets were a huge upgrade from OEM. both work smoothly and feel like a quality residential faucet. the kitchen faucet went in without a hitch, no problems and works great. The bathroom was a bit more involved. Turns out the threaded attachments on the new one are about an eighth inch shorter than the OEM which wouldn't allow the water line fittings to tighten enough. I had to mill about a sixteenth off the mounting nuts and some off the Pex couplings to get enough threads to allow them to tighten enough. After that all is good.
Came fast went in perfect and is working fine...took about 1/2 hour to change.
Not yet installed, but excellent quality, materials, & craftsmanship. Anxious to put into service, but anticipate no concerns due to the quality of this faucet.
Easy install . Works great. Hope it lasts a long time.
Con. A little pricey
This was the perfect faucet to replace the one in the bathroom of our 1998 Sunnybrook fifth wheel. I was able to do it myself and we’ve had no leaks. A beautiful upgrade!
Material quality, Customer Service and Shipping were all excellent.
Thank You
Love the faucet! Exactly as described...all parts included. Great communication & followup ...super fast delivery!
Well made, easy to install, and shipped at once. I'm a happy customer.
I the faucet has performed great since I bought it! It’s about a year now and still works great!!
Great quality for the price, quick response and shipping!
Very nice looking faucet, easy to insta ll.
Fit well and works good . Thanks
I purchased this single handle faucet to replace the RV manufacturer’s low rise faucet. It works very well. It mixes hot and cold water efficiently, and has the rise needed to allow for full functionality of our small bathroom sink. It is easy to keep clean also.
Do you have a question about this RV Faucet?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bill T.
10/6/2020
Still working and looking great, Very happy with them