Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Plastic RV bathroom faucet has a D-spud outlet that lets you add a handheld shower set (sold separately) to complete your shower setup. Durable, washerless stems reduce daily wear and tear to extend the life of your faucet.
Features:
Specs:
The D-spud outlet lets you attach a handheld shower set (sold separately) to make cleaning mud and sand off the kids, pets, and shower walls even easier. To activate the shower, lift the diverter pin up.
This faucet lets you upgrade the bathroom faucet in your RV or camper. Using the inlet shanks, drop the new faucet and deck plate in place through the mounting holes of your existing faucet. Then tighten the included mounting hardware. Finally, connect the hot and cold water lines. The use of tub and tile caulk (not included) is required.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Phoenix Faucets 4-inch dual handle RV bathroom diverter faucet. This unit adds or replaces the diverter faucet in your RV. It's a lead-free design. It's going to feature the dual white acrylic lever handles that gives the unit a really nice look. It's going to feature the quarter turn design. Then they have the H and C indicators on there to indicate hot and cold. We're also going to have the D Spud outlet on top for attaching the hand-held shower.
Now the handheld shower is not included. Those are sold separately and can be found here at etrailer.com. When you're read to use the shower, all you have to do is lift up on the spout lift rod, which is located right here. This is going to divert water flow from the spout to the showerhead. You just lift that up, very small movement on that piece right there, but you lift it up and then that's going to divert the water. The unit is designed to prevent water backflow, which is going to help prevent contamination of your fresh water supply. It's made from a durable plastic construction that's white in color.
It does have a low-flow aerator on it, that's already installed. That's going to have a flow rate of 2.2 gallons per minute. The mounting area does require two holes for your installation, these are going to be the connection points for the hot and cold water lines. These are separated on center by four inches. They're going to give us a length measurement of two inches.
These connection points are going to have an outer diameter, measuring outside thread, the outside thread, that looks to be 13/16 of an inch with an inner diameter right around half an inch. The shower head's connector right here, the D Spud outlet, that's going to have an outer diameter of 13/16 of an inch. Taking a few measurements of the base, front to back we're looking at about 2-1/8 of an inch. Side to side, we're looking at a measurement of just over six inches, maybe 6-1/8 to 6-1/4. I also took a measurement from the bottom of the base, measuring the overall height, I can turn it this way so you can get a better look at that. This would be the overall height from the mounting surface.
It's going to be pretty close to 3 inches, maybe 3-1/8 to 3-1/4, right in that area. The overall depth from the back of the mounting area, or the base to the furthest out front of the unit we're looking at about 5-1/4 inches. I also took a measurement from the mounting surface to the low flow aerator right here, and that gave a height measurement from the mounting surface of about 1-1/8 of an inch. Pretty simple installation, it does come with the backing plate, now that's a one-piece design, and it's going to come with the threaded mounting nuts. It's also going to come with your detailed installation instructions. That two holes are required for installation, those are going to need to be separated on center by four inches. Going to have a diameter of one inch. Just going to walk you through that installation process. On this side it's going to have some operating instructions and some helpful tips, and on the backside it's going to have a detailed breakdown of the parts list. That's going to do it for today's look at the Phoenix Faucets four inch dual handle RV bathroom diverter faucet.
Average Customer Rating: 4.7 out of 5 stars (694 Customer Reviews)
Plastic RV bathroom faucet has a D-spud outlet that lets you add a handheld shower set (sold separately) to complete your shower setup. Durable, washerless stems reduce daily wear and tear to extend the life of your faucet.Couldn't find it anywhere else. trailer will be my go to place.
Because etrailer orders are late and I’m not getting anything else there. They should ship their stuff with another shipper they will ship with UPS and that sucks.
Etrailer did its job well again. Quickly found the part online and it was shipped right out. Faucet is exactly as described and works. Is it Moen, Kohler or Delta quality? No, but RV plumbing products aren't. Wish it was a bright white like the rest of my bathroom instead of cream/off-white color.
Michael W.
11/14/2019
Working great, no problems
This is an improvement over the stock faucet as the diverter is not on the shower stem and is more positive engaging. Installation on my Lance camper was awkward, not due to the faucet design, but rather the camper is designed for manufacturing instead of service. I would have given it 5 stars but it should have a washer for the shower connect. The previous faucet had a captive o ring.
It’s plastic but it looks like good quality and a nice finish. Operation of the handles is really smooth.
Very happy.
Always get good results from etrailer.
it arrive well packaged, was easy to install and looks and work great!!!
Fast! Just what I wanted. I've bought from etrailer for a number of years. No complaints.
They worked well. Thanks,
The main faucet housing is 2 piece. The bottom piece need some minor sanding to sit flush with upper piece. Once installed I am happy with the end result.
Works and looks great, Easy install.
Good product! Great price !!
Perfect
Really the faucet was installed last May. The RV has not had water to it. So have never tested the faucet. It was part of on going refurbishing of a 22 year old Class B+ RV that I bought a year ago. Also part of this work we've ordered and installed from e-trailer your Dometic 310 toilet, a MaxAir Fan, & other items all installed but some untested. The fan works great. The toilet seems to as we made sure the black and grey tanks were cleaned out well by pouring water down the drains and toilet. We will repeat this spring when it comes out of winter storage. The fresh water tank was removed to repair water damage below it and in the wall it blocked both. We also had to sanitize the tank due to mold entering it where previous owners allowed the air intake hose to flap about un-attached causing the leaks and water damage to the floor. We know the Ford Engine is in decent condition but due to so much unexpected work we are behind a good year getting Miss Mini Mo on the road and fully activated. She's come a long ways & with your help with parts like this. Which btw was almost identical to the one removed. We'll treat her with far more respect than the previous owners have. Thanks e-trailer no doubt we'll be back for more STUFF once we bring her out of winter storage.
I replaced the faucet in my 2014 Skyline SkyCat with this faucet. Two great features here: 1) The best feature is the attachment point for the shower hose. This one is on top of the faucet instead of underneath it. When you shut off the water it all drains down and out of the hose, making winterization a breeze. I don't have to detach the hose to drain it. 2) Since the shower hose attaches at the top, it will effectively be a little bit longer which is nice for taller people.
Lauren (customer service agent) was extremely knowledgeable and responsive to my questions to include my special request for expedited shipping (something not specifically listed on the web site). In addition, the details of the product were great; such that the specifications listed ensured that the product would be a applicable replacement for the defective item in our RV (unlike another, similar product that I ordered from an alternate source that didn't fit and will now have to be returned). Thanks Lauren.
Used it in my boat shower and it worked perfectly. Good quality and reasonable price. Easy to install and looks great
Good replacement. I would recommend this to all who need a new faucet.
It was just like old one looks great and fits right in holes that were there.Alex was very helpful and oder came the day he said it would.It looks good in shower.Would buy again.
i contacted etrailer and Bobbie answer the phone she heip me place the order and it fit perfect and the shipping was fast thank you Bobbie and others for putting my order together for your helpand understanding. John M.
Faucet works great. Looks nice. Good order time
Great service as always with etrailer. The faucet fit and works nice the only issue it is not white like the pic and description shows, it is more of an off white but it still looks ok in my shower.
Do you have a question about this RV Faucet?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Michael W.
11/14/2019
Working great, no problems