MORryde RV Generator Slide Out Tray - 15-3/4" x 16-5/8" - 100 Percent Extension - 250 lbs
(175 reviews)
Price: $182.88
In Stock
MORryde RV Generator Slide Out Tray - 15-3/4" x 16-5/8" - 100 Percent Extension - 250 lbs
Item # MR99RR
Retail:$281.27
Our Price: $182.88
You Save: $98.39
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (175)
- Q & A (0)
- Videos (4)
- Photos
- Used (1)
MORryde RV Cargo Slides - MR99RR
- 15-3/4 Inch Long
- 16-1/4 Inch Wide
- MORryde
- 100 Percent Extension
- 1 Way
- Generators
- 250 lbs
- Preassembled Tray
Tray holds your generator and slides out, making it easy to grab your generator or top it off with gas without having to crawl into a cramped cargo compartment. Straps stop the generator from sliding around while traveling to the campsite.
Features:
- Utility tray slides out for easy access to the generator in your RV's storage cargo compartment
- Grab your generator or add gas to it without crawling into a cluttered or cramped compartment
- Works with most common RV generators
- Safety latch locks the tray in the stowed position to prevent it from sliding open while traveling
- 1 Black knob is pulled up to slide the tray out
- 2 Adjustable straps tighten over your generator to keep it firmly in place on the tray
- Durable steel construction with black powder coat finish
- Bolt-on installation in your storage compartment
- Tray is preassembled
- Hardware not included
- Made in the USA
Specs:
- Fits: RV cargo compartments at least 15- 3/4" deep
- Weight capacity: 250 lbs
- Tray extension: 100 percent
- Overal length including handle latch: 15-3/4" long
- Overall height including top of latch: 5-1/4"
- Overall width: 16-5/8"
- Internal dimensions: 14-1/8" long x 14" wide x 2-3/4" tall
- 1-Year limited warranty
Note: Do not run your generator while the tray is inside your cargo compartment.
Need a way to easily top off your generator with gas during your next off-the-grid camping trip? This tray slides out of your RV for quick access to your generator so you don't have to crawl into your cluttered or cramped cargo compartment. When you need to add gas, pull the knob up and slide the tray all the way out. When you're finished, push the tray all the way back in until it's stowed away. The safety latch locks the tray in place, so it won't slide out while you're traveling to the next campsite. And to make sure your generator doesn't get banged up while you're traveling down the road, tighten the 2 included adjustable straps over it and secure them to the integrated slots on the tray.
Bolt-On Installation
This preassembled tray installs inside the storage compartment of your RV or motorhome. Making sure there's adequate clearance of the compartment door, bolt the tray down onto the compartment floor using the pre-drilled holes. Mounting hardware is not included.
SP60-041 MORryde RV Utility Tray - 250 lbs
Video of MORryde RV Generator Slide Out Tray - 15-3/4" x 16-5/8" - 100 Percent Extension - 250 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for MORryde RV Generator Slide Out Tray Review
What's up, everybody It's AJ with etrailer.com. Today, we're going to be checking out the MORryde sliding tray. Now you can use this on generators. We have it set up on batteries today, locks into place. You don't have to worry about going anywhere when you're going down the road just pulling the latch, slide it back out. It's gonna make it really easy for us to work or replace these batteries.
Now we don't have to climb into the compartment and hit our head on anything. Let's check it out. Now there's gonna be five different sizes of these sliding trays out there so make sure you measure the compartment. Think about what you're gonna put in it and where you want to put it to get the right one. We have these smaller versions today, the 15 by 16 and we're using two batteries in here.
Like I said, easier to access and pullout here and work on it than try and reach in there and mess with anything. So some of the other ones are gonna be different shapes so there's more square or rectangles. When you wanna do it with a generator you're gonna need more space to put that generator in place to do the same thing, slide it out and work on it easier out of the compartment than in. It's gonna be really easy to use and operate. You have the latch here.
You got the ball that you can hold onto to lift this up. This is gonna lift the striker outta the way. And then you have this handle on either side to grab and pull the tray out. Now it does fully extend a hundred percent. We're held back by wires on the batteries right now but that gets it out of the compartment quite a bit.
I'd like to point out the holes here and the tray. It comes with these straps as well. So you can also strap down whatever you're setting in the tray. Again, just another thing to keep the batteries in place so they won't be moving around while you're driving down the road. Depending on which tray you get the weight capacity's gonna be a little bit different. The biggest version is gonna be 25 by 26. That's gonna be rated for 300 pounds. Now all the other ones like the one we have here is rated for 250 pounds. So just keep that in mind with what you wanna load up on the tray. Now this one's already installed, but I wanted to go over the processes a little bit so you have an idea of what you're getting into. So it's all gonna come assembled so you don't have to worry about putting anything together. And what you're gonna do is attach this frame to the bars of where you want to put it. So there's gonna be pre-drilled holes in here. So when you set it up on the frame make sure it lines up where you want it and you have to get your hardware separately. It does not come with hardware but then you can run some bolts in to hold it in place. So you can see the bolts on the inside here of this lip. They also welded this one in place so it's really not going anywhere. Overall, I think it makes it way easier to either access the batteries or the generator you have in here plus servicing the generator with you're changing out the oil. You don't have to try and lift it up and out of the compartment, set it on the ground worry about it. You can just slide it out and start to work on it that way. It's heavy duty. It doesn't feel like it's gonna have any issues. I like how easy it's to slide in or out and that latch feels real good too. I don't have to worry about this starting to slide out or anything if I take a weird turn. Well, I think that about does it. Thanks for hanging out and hope this helped.
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Manufacturer issue
- Wrong item was ordered
Customer Reviews
MORryde RV Generator Slide Out Tray - 15-3/4" x 16-5/8" - 100 Percent Extension - 250 lbs - MR99RR
Average Customer Rating: 4.6 out of 5 stars (175 Customer Reviews)
Tray holds your generator and slides out, making it easy to grab your generator or top it off with gas without having to crawl into a cramped cargo compartment. Straps stop the generator from sliding around while traveling to the campsite.by: keom06/16/2021
My old battery tray was a rusted mess that required me to sit on my butt to push it in with my legs. This replacement is a dream! I was able to install it myself in a short amount of time. I've never installed anything like this, but it was easy. My old bolts were rusted (and some broke removing them) so I had to visit Lowes and get help picking out new hardware. That took longer than installing the drawer! I did make a little template out of a large paper bag so I'd know where I wanted the drawer and where to drill my holes--since my two hands weren't enough to hold it in place while pulling out the slide and also mark my spots. If you have someone to help with that part, use them. The drawer slides so smoothly, and it securely holds my batteries with the included straps. I did stuff a small piece of wood between the batteries and each side to ensure the rivets others mentioned don't pierce my batteries, but I'm not sure they would anyway. Just being extra cautious since I had the wiggle room. Highly recommend the product and etrailer. It's my third or fourth purchase from the company, and their customer service is consistently excellent, shipping is lightning fast. (For perspective, I'm a 40-year-old, female, first-time owner of a 21-year-old RV with some handy skills but far from a pro.)
by: Gregg12/20/2021
Ordered two drawers: neither would not open to a full extension. Had to pound on them for a while. Eventually, got them to fully extend. May want to check the drawers for full extension prior to shipping. Otherwise the product works fine.
by: Jason09/19/2022
The parts were sent on time and correct. Just missing one portion that was made correct. I would order again without any issue
by: Chris 12/24/2022
fast shipping
by: Donald 08/11/2022
Seems solid and we will know as we use it.
by: Grant04/07/2024
by: Natalis04/21/2023
by: Roger S08/23/2022
by: Christopher03/25/2024
I am unsure if I received a faulty product. I am using a 3500 Predator generator for my detailing setup, and the pull out does not stay pulled out unless the ground is slanted. I would of thought I locked in place. Also this set up does not bring the screws or proper hardware.
by: Michael04/25/2023
I use this tray as a battery tray for two Trojan 12 volt golf cart batteries for my RV. The batteries are 85 lbs each and the slide makes them accessable for maintenance. The previous owner, or some other jerk removed the original trays, and exact replacements are no longer available.
by: Rezilient03/24/2024
Great generator slider, easy to install and holds the weight of my 100lbs predator generator no problem
by: Donna 02/24/2023
Packaging didn’t survive the trip, but the item was fine. Fast shipping. Nice quality slide out tray, perfect for my application!
by: Gregory04/06/2024
Overall this does what it should do. But one thing to be aware of is that the side sliding brackets are attached with rivets that project into the tray 3/8" on each side as well as with the front locking mechanism decreasing the tray's actual interior dimensions. My Dometic ref/cooler just fits but I may still drill out the rivets and replace them with machine bolts and nuts to gain more clearance.
by: Chris 04/21/2024
Etrailer was great as usual with quick and fast shipping. The item works mostly as expected. The locking mechanism is not very reassuring. The included straps are way too short. I don’t think just for my generator, I’m not sure they would fit any model honestly.
by: Shawn11/21/2023
This is the perfect solution to my issue with having to load and unload my generator by myself. I can now safely run my generator with the slide pulled all the way out. The quality is excellent and very well put together.
by: James07/20/2023
Very well-built product.
Extremely sturdy and rolls extra smooth.
Work perfectly for the installation of a 12 V / 110 V beverage cooler.
I added a piece of half-inch plywood to the top to extend the length for the cooler base.
Made the storage compartment 100% more usable!
by: Alvin10/10/2023
This generator slide out was exactly what I was looking for. My wife had bought a new generator for my race car trailer so now was the time to upgrade. The MORryde generator slide out is very heavy and seems very well built. Slides out and back in easily. The only thing that I would change is the length of straps that came with it. But that is really a non issue as I wasn’t buying this for the straps. It does not come with hardware to bolt it down but this is stated in the description. Each installation is different so again this is not an issue. Very pleased with the product and would recommend this to anyone.
by: Crystal 02/11/2023
Great quality. Fast ship. Easy to install. Used it in GrandDesign fifth wheel to hold Blackstone grill.
by: Michael 03/03/2023
The slide out seems very sturdy and glides smoothly. I feel much better about the purchase. Can't wait to install it.
by: Chris p04/26/2023
Great product very easy to install. I do mobile reconditioning on cars and needed to get the generator out of the trailer without breaking my back moving in and out everyday.
by: Tom12/06/2023
I bought these MORryde full extension slide-out trays to replace a pair of battery trays in my motorcoach that were 20 years old and in need of refurbishment. The trays are in-kind replacements of the existing trays, and the best available in the industry. They work as designed, and are well-made. The trays get five stars, and the vendor gets five stars as well. I would give etrailer a higher rating if it existed.
A week prior I had ordered these trays from another on-line vendor. After a week with no scheduled delivery date and making numerous inquiries by email, text, and phone with no response, I finally was forced to cancel the order. I then ordered the trays from etrailer, and received an immediate order acknowledgment with the shipping schedule and tracking number. They were shipped that day, and the items were delivered several days later, a day earlier than scheduled. A good experience all the way around. Thank you!
by: Kevin11/25/2021
As described and expected. Low profile made for perfect clearance for equipment space. Used through Bolts for large weight/leverage.
by: Tim03/08/2023
Great customer service. Received within two days. Good quality and exactly what I needed and ordered. I’m using as a slide for a toolbox. I have order before from etrailer, and will order again.
by: Jordan 01/06/2024
I have a mobile auto detailing business. I use my generator to power everything! So I am pulling this try in and out many times a day. I have had no issues with it at all. I love how smooth it rolls. Great product and amazing craftsmanship.
25
174
Show More Reviews
See what our Experts say about this MORryde RV Cargo Slides
- Dimensions Of The MORryde Generator Tray MR99RRThe MORryde Generator Tray - 15-3/4" x 16-1/4" # MR99RR is 16-1/4" in length x 15-3/4" wide. I've attached a diagram that will show you all of the dimensions of this generator tray.
view full answer...
- Recommended RV Sliding Cargo Tray For A 22.5" x 19" Space The closest option we have to your space requirements would be the MORryde RV Generator Slide Out Tray # MR99RR, which is 15-3/4" x 16-5/8" and has a 250lb capacity.
view full answer... - Availability Of Sliding Cargo Tray For 22-1/4" Wide Access Door In 2021 Outdoor RV Timber Ridge TTI have another option that may work for you, but the the MORryde Sliding Tray for RV Cargo Compartment - 90" x 26" - 800 lbs - 2 Way # MR87FR you were looking at is the not available in a 20-22" width to fit the access door in your 2021 Outdoors RV Timber Ridge 22 FQ. The closest option is the MORryde Generator Tray - 15-3/4" x 16-1/4" # MR99RR which measures 15- 3/4" long x 16-1/4" wide x 5" tall and has a weight capacity of 250lbs.
view full answer...
Do you have a question about this RV Cargo Slide?
Used Items Available
Condition: Surface Scratches
Notes: Item has a minor cosmetic scratch on the back left corner. Otherwise in good condition.
Info for this part was:
Installed by:
Andrew K
Installed by:
Michael B
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Noah M
Updated by:
Carrie F
Written by:
Mary K
Edited by:
Amanda M
Test Fit:
John A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Sierra K.
12/21/2021
Some lubrication spray may be needed to maintain smooth extension.