Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
(65 reviews)
Price: $211.64
In Stock
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Item # C31069
Retail:$325.95
Our Price: $211.64
You Save: $114.31
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (65)
- Q & A (0)
- Photos
CURT Front Receiver Hitch - C31069
- Front Mount Hitch
- Custom Fit Hitch
- CURT
- 9000 lbs Line Pull
- 500 lbs Vert Load
- 2 Inch Hitch
- Square Tube
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over steel resists corrosion
- Sturdy, square-tube design
- Assembled in the USA
Specs:
- Line pull: 9,000 lbs
- Vertical load: 500 lbs
- Gross trailer weight: 5,000 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31069 Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Installation Details
This Product Fits The Following Vehicles
- 2014 - 2018 GMC Sierra 1500
- 2019 - 2019 GMC Sierra 1500 Limited
- 2014 - 2018 Chevrolet Silverado 1500
- 2019 - 2019 Chevrolet Silverado 1500 LD
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Too difficult to install
Customer Reviews
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - C31069
Average Customer Rating: 4.8 out of 5 stars (65 Customer Reviews)
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: David06/18/2022
2014 Chevrolet Silverado
Great VIDEOS and helpful questions and answers service. Fit my 2014 Silverado present and I had a good idea how the job would go before the hitch even showed up.A little slow on the shipping but other than that very happy with my purchase.
by: Matthew from Minnesota.12/05/2020
Purchased a front mount receiver hitch for my pickup from etrailer.com. The hitch mounted exactly as it said and was a super to install. I plowed snow all winter with a receiver plow. Now I move three times the snow now in a third of the time.
by: John11/27/2018
Chevrolet Silverado
2014 Chevy Silverado. The hitch arrived in what seemed to be record time.
Install was very straightforward. The only issue was the front mounting holes were too small to accept the spacer and bolt. A little time with a die grinder was all it took.
Since I was installing alone I used a short pipe clamp to hold the passenger side in place instead of a jack.
Install time was 50 minutes.
I have a 2" leveling kit on the truck and ended up with 10-1/2" of clearance below the hitch.
Overall I'm very pleased with the hitch. My primary use will be to occasionally mount a winch on the front or back as needed.
by: Tom09/24/2019
This front hitch works well with my rod/cooler rack for surf fishing! I installed myself using the instructions. (Would've been easier with a second person!). It's low profile. I removed the air dam to make it easier for install and gain more ground clearance overall. I have a 2018 Silverado.
by: Christopher10/11/2021
2015 Chevrolet Silverado 1500
The hitch quality is great the fit was perfect and mounting time was about 35 minutes.
One thing that would make the installation better would be to include 6 of the fishing wires instead of only including 2. When bolting the hitch to the frame it is real easy to push the bolts back up into the frame. With the extras fish wires you can just feed them through the holes in the hitch and not worry about losing the bolt. This would make it much easier to mount.With that being said I would recommend this hitch to anyone who needs a front mount hitch.
Heather A.
10/12/2021
Thank you for your suggestion. We do have the fish wire that is needed for this install if you need an extra one part # C58400.
Helpful Links
Christopher
10/14/2022
Excellent Best Hitch on the market.
by: John 05/11/2024
2014 Chevrolet Silverado 1500
Very well built and easy install.
by: Scott M03/17/2018
First order of business with the new mount. My new hydraulic-less plow for residential and some commercial servicea
by: David09/11/2022
2018 Chevrolet Silverado 1500
Easy to install… Just right for my winch and four wheeler
by: Mike 07/22/2023
2017 GMC Sierra
Very easy install on 2017 sierra 1500. Took an hour by myself without jacking up truck. With two people and a jack could easily be done in no time. Jack is not needed but would’ve allowed a little more clearance to drill holes easier. Did not have to trim any of the fascia
by: Jon 10/29/2021
2018 Chevrolet Silverado 1500
Hitch fit exactly as it should. Directions were clear, although I did watch an [online] video just to make sure I understood how to pull the bolts through the frame. It took me a little over an hour and a half to install by myself.
Jon
10/30/2022
Still as solid as the day I got it.
by: Wayne 12/21/2019
2015 Chevrolet Silverado 1500
The hitch came yesterday. It was packaged extremely well. The paint finish is great, I can't wait to install the hitch on the front of my pickup. It will be after Christmas now as too much to do to get ready for the holidays. After that I will submit a second review once the product is installed. etrailer is the best for products of this nature, always a good shopping experience . Thank you
Wayne
12/22/2020
well after a year and the hitch installed Ive yet to use it. Due to cover we have not traveled, but the hitch is great just the same.
by: Doug 09/04/2022
Product mounted up perfectly and works great. I use it for a cargo carrier to haul my moped to the campgrounds. I get lots of looks and inquiries about it. I have NO complaints with this company and I've bought plenty of stuff from them. Customer service is outstanding and delivery is ahead of time.
by: Benjamin05/05/2021
Installation was easy even when combined with my grill guard.
Even so, I have three recommendations. 1) Remove the bottom plastic air deflector. This will help with installation and even more when inserting and removing hitches. 2) Install a 2" leveling kit to the front suspension. The stock ride height will let the receiver come in contact with high curbs when parking. 3) Use a hitch extension to get out in front of the bumper.
by: Terry C. (Ag-ado)10/29/2016
2016 Chevrolet Silverado
This is the 2nd Front Hitch that I have purchased through eTrailer, made by Curt.
My first was for my 2004 GMC Sierra. After several years pushing a driveway plow and launching & precisely parking boats,....I decided to buy a new 2016 Silverado.
The 2004 Hitch mounted with only 2 bolts on each side. There was clever use of the tow hook bolt & an open access hole. No holes needed to be drilled. I bent the plow rack & bent a hitch extender over the years but never compromised the hitch. I'm going to give this hitch to my brother for his 2015 Silverado 2500 for a front winch mount.
The 2016 Hitch used an access hole on each side and required me to drill 2 more holes on each side. This hitch is just as strong as the rear hitch,....probably stronger! The instructions suggested that I trim the airdam,....didn't have to. I pulled out one screw and bent the airdam over a little.
The other brand offered by eTrailer was recognizable, but not as well designed & made as the Curt.
Next truck I buy,...I'll be back to eTrailer for another Curt Hitch!
Oh,...incidentally; the website, ordering, delivery, packaging, instructions were all GREAT!,....and like most busy people, I don't have time to give this feedback, but eTrailer's Bill P. asked kindly & deserves it.
by: Roger 07/05/2022
A great addition to any truck really and the price is reasonable. Easy to install with only 4 holes to drill in the front frame. Maybe 2 hours of work and it easily blends with the air dam under the front bumper. I use mine for a simple plow attachment to quickly clear my driveway. It's beefy enough to handle maneuvering a boat trailer into a tight parking spot also.
by: Julian02/14/2022
Extremely well engineer, simple and easy installation. Most people don’t realize how easy a front hitch can make putting a camper or boat into a tight spot. I’m very satisfied. This is my second purchase of a front mounted hitch, second vehicle.
by: Levi07/30/2018
2014 Chevrolet Silverado
Installed this on a 2014 Silverado 1500. Very easy install with two people for an extra set of hands to hold hitch up while marking drill holes and tightening the first 2 nuts to hold the hitch to the frame. I had previously installed a 2" front end leveling kit on the truck so the ground clearance difference is barely noticeable. I would recommend this hitch to anyone looking to put this on a similar truck.
by: John 05/20/2023
Great hitch. Fit perfectly on my truck.
Customer service really good, they keep you updated right from when you place your order.
by: John01/15/2019
2018 Chevrolet Silverado 1500
Great product, well built. went in just like the instructions said, though one must be very careful when positioning the hitch over the bolts coming down from the holes in the frame that are drilled. One bolt ended up being pushed up into the frame member and took 1+ hour to retrieve. Use the fish wires to extend from the bolts so if one (or more) ends up being pushed up passed the hole opening, it will be easy to retrieve!
Once in though, looked great and didn't even have to cut any of the "fascia" to fit the receiver.
by: Elizabeth06/23/2018
Was glad to receive my box early, however, the one brace on the hitch was 1/2" off and had to be pried out to fit properly...Not an easy task. As far as time installing the hitch, I am not a novice but it took me quite a while to install this. The fishing line kept going up, luckily i had long nosed pliers to pull it into place. All in all I am happy with the hitch.
Gary B.
6/26/2019
Great
by: dzsmlm05/01/2021
A front mounted hitch for me allows me to switch my winch from rear to front and to launch my boat trailer easier in some locations.
Dennis D.
5/2/2022
This hitch is doing a great job. So much easier to load my boat into the lake.
by: Timothy04/23/2019
Very easy installation (1 hour) with no problems. The air dam only required a vertical 3/4" cut to fit. I only cut the sides and let the tongue push the plastic upwards. The wire used to snake the nuts and washer bar into the frame is ingenious. All four fell into place on the first try.
Timothy
4/24/2020
It remains one of the best accessories to put on a truck. The ease of maneuvering a trailer is outstanding.
by: Chris11/09/2017
2017 Chevrolet Silverado
etrailer provided very good service and affordable prices. Excellent fit on my 2017 Chevrolet Silverado. I will recommend etrailer to others. Satisfied customer Chris Duran
by: Edwin j10/19/2018
2017 Chevrolet Silverado 1500
The fast shipping and service was GREAT, I am going to modify the receiver for my needs, and will post a review when done.
Edwin J.
10/20/2019
The modified receiver works great. I removed receiver tube from the center, then added two new tubes at either end, this made the cooler rack 100 wobble free. I can still use the front mount receiver to jockey my boat around in tight spaces. Id give it 5 stars.
by: Carl R.03/24/2017
2017 Honda Pilot
Love CURT front hitch, bought one from you for old suburban and just put this new one on new Siverado P/U. Only advice I would add for people is to start with drilling smaller pilot hole than bigger and finally with specified 17/32" bit to make it easier drilling while laying on driveway under truck. I also used a 5/8" bit because I had one and all worked out fine. Now we can put the bike rack on front and camper on back.
25
65
Show More Reviews
See what our Experts say about this CURT Front Receiver Hitch
- Comparing Curt Front Mount Hitches For 2016 GMC Sierra 4-Wheel DriveBoth of the Curt hitches are designed to fit your 2016 sierra 1500. I checked the installation instructions for part # C31069 and part # C31012, and the instructions say to lift the hitch up into place to determine if the lower fascia needs to be trimmed. They are both listed with the same line pull of 9,000 lbs and have 2 inch receiver opening. Since they are both nearly identical in design I recommend going with the # C31069.
view full answer... - Curt Front Mount Trailer Hitch Compatibility With A 2018 GMC Sierra 1500 Base Elevation Edition The Curt Front Mount Trailer Hitch Receiver # C31069 is a compatible fit for all models of the 2018 GMC Sierra 1500 so it will be compatible with your Base Elevation edition. This custom fit hitch has an easy, bolt-on installation with no welding required and all necessary hardware included. The gloss black powder coat finish over steel resists corrosion to provide a nice clean look for a lifetime.
view full answer... - Does Installation of a Front Mount Hitch Receiver Void the Warrant on a 2015 Chevy Silverado 1500Consumers of aftermarket products are protected by the Federal Magnusson-Moss Warranty Act. The Act states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications you have added to your vehicle actually caused the problem in question. So you can install a front mount hitch such as # C31069 on your 2015 Chevy Silverado 1500.
view full answer... - Is Fascia Trimming Required to Install Curt Front Mount Trailer Hitch on 2014 GMC SierraYou may have to trim the fascia on your 2014 GMC Sierra 1500 to install the Curt front mount trailer hitch # C31069, depending on how the front bumper is mounted to the frame. This varies with each individual vehicle. The best way to determine if trimming is required is to raise the hitch into position. If needed, mark and trim the lower fascia or remove lower fascia. (See the linked installation instructions for the fascia trim detail). I have also included a photo of this hitch installed...
view full answer...
- How to Carry Bikes on Front of 2015 Chevy Silverado 1500While it is possible for you to carry bikes on the front of your 2015 Chevy Silverado 1500, a trunk-mounted bike rack isn't going to fit as it is not designed for the front of vehicle so there is no way to securely mount it. Instead, what a lot of people do, and the route I recommend for you is to add a front-mounted hitch to your truck and a hitch-mounted bike rack. The correct front mount hitch for your 2015 Silverado 1500 is the Curt Front Mount Trailer Hitch Receiver # C31069. I...
view full answer... - Front Mount Hitch for 2014 Chevrolet Express Cutaway VanThe Curt Front Mount Trailer Hitch Receiver # C31069 was designed around the frame of a 2014-2019 GMC Sierra 1500 and I would be very surprised if the distance between the frame rails of your 2014 Chevy Express Van Cutaway matched those of a Sierra. The mounting holes on the # C31069 install on 31.875 inch centers. I've attached a snip form the installation instructions which shows this. Since there isn't a custom front mount hitch available for our van, your best option is to go with...
view full answer...
- Curt Front Mount Hitch Comparability for 2017 GMC Sierra 1500 DenaliThe Curt Front Mount Trailer Hitch Receiver # C31069 will fit all models of the 2017 GMC Sierra 1500 so it definitely fits your Denali. Attached are the installation instructions for you to check out as well. If you let me know what you plan on using the hitch for I can make additional recommendations as necessary.
view full answer...
- Front Mount Hitch Compatible with 2018 GMC Yukon SLT or DenaliThe correct Curt Front Mount Hitch for your 2018 GMC Yukon is part # C31073. It is confirmed to fit all models, including ones with the SLT and Denali trim packages and features the same capacities as the # C31069: Line pull: 9,000 lbs Vertical load: 500 lbs Gross trailer weight: 5,000 lbs The Curt Front Mount Hitch # C31069, which you were checking out, fits certain styles of 2014 and current Chevy Silverado/GMC Sierra 1500.
view full answer... - Front Hitch and Winch Mount Plate Recommendation for 2015 GMC Sierra 1500The Curt front hitch part # C31069 is a confirmed fit for your 2015 GMC Sierra 1500 and would work well with a winch mount. It has a line pull rating of 9,000 lbs. The Curt winch plate part # C31010 is designed to fit the standard winch mount bolt patterns. You can also add bolt-on handles to the plate with part # C31005.
view full answer... - Front Hitch Recommendation for Ground Clearance for 2017 GMC Sierra 1500All of the front hitches we offer for your 2017 GMC Sierra 1500 are going to install below the front bumper. The Curt part # C31069 will have the best ground clearance as it sits the highest and the hitch opening hangs down below the crosstube of the hitch unlike the Draw Tite. I attached a picture that shows the Curt hitch when it's installed and the area of the air dam that gets trimmed.
view full answer...
- Is There a Ground Clearance Difference Between Curt Front Hitches for 2018 Chevy Silverado 1500Both Curt front hitches that fit your 2018 Chevy Silverado 1500 from Curt part # C31012 and # C31069 install in the same area and require the same amount of the front fascia to be trimmed so the ground clearance would be the same.
view full answer... - Is Drilling Required to Install the Curt Front Mount Hitch for 2018 GMC Sierra 1500 SLTYes. The Curt Front Mount Trailer Hitch # C31069 does require drilling holes for installation, but this would be the case for any front mounted hitch on the 2018 GMC Sierra 1500 SLT. I've linked the instructions for this hitch to this answer, but you will need a 17/32" drill bit to drill through the steel frame.
view full answer... - Front Mount Hitch For 2015 Chevy Silverado 1500The correct front mount hitch for your 2015 Chevy Silverado is the Curt Front Mount Trailer Hitch Receiver # C31069. You will have to drill 17/32" holes to install the front hitch on your Silverado.
view full answer... - Front Mount Hitch Receiver that Does Not Require Drilling for a 2015 Chevy Silverado 1500Draw-Tite front mount receiver # 65064 mounts to different locations on the 2015 Chevy Silverado 1500 than Curt hitch # C31012 or # C31069. I have included links to the installation instructions so you can see how each one installs. I am of the opinion that no drilling is the much better option then one that requires drilling. Drilling into a vehicle frame isn't easy because the frame is so strong. So avoiding that is a good thing! That is why if it were my truck I would choose # 65064.
view full answer... - Recommended 3 Bike Carrier For Front Receiver Of A 2015 GMC Sierra 1500 4x4For your 2015 GMC Sierra 1500 4x4 with Curt Front Receiver # C31069, I recommend the Kuat Transfer V2 Bike Platform Rack - 2" Hitches - Wheel Mount - Tilting # KU24FR. When mounting to the front of a vehicle, you want to have the least obstructed view as well as make sure your headlights aren't obstructed. This bike rack will not use a center mast, and its fixed mounting is at the wheels so different size bikes will give you the different dimensions that may give you a better view. The...
view full answer... - Do Curt Front Hitches 31012 and 31069 Install Same and Have Same Ground ClearanceThe Curt front hitch part # C31069 that you are interested in would install in the same frame holes on your 2015 GMC Sierra 1500 as the front hitch part # C31012 that you weren't happy with. From the mounting surface to the bottom of the hitch tube on the # C31069 measures 9.52 inches. This should give you slightly better ground clearance than the Curt you already tried.
view full answer...
- Will the Hitch Pin Hole on the Curt Front Hitch part # C31069 be In Front or Behind Air Dam I attached a picture of how the Curt front hitch part # C31069 will look when installed on a truck like your 2014 Chevy Silverado 1500. The hitch pin hole is right behind the air damn. It is a little hard to see in the picture so I put an arrow on it to point it out.
view full answer...
- Can Curt Front Hitch For 2018 Chevy Silverado 1500 Handle 460 lb Vertical LoadYou're all good with that set up for your 2018 Chevy Silverado 1500. The two scooters weigh a combined 388 lbs, and the additional 75 lbs of the carrier takes you to 463 lbs, which is under the 500 lb vertical load (which is the same as tongue weight for a front hitch) of the Curt front hitch that fits your truck: - Curt Front Mount Trailer Hitch Receiver # C31069
view full answer... - Comparing Curt Front Mount Hitch Receivers for a 2015 GMC Sierra 1500Curt front mount hitches # C31069 and # C31012 are nearly identical with the exception of what all each will fit. The newer C31069 is designed just for trucks whereas the C31012 also fits some GM SUVs such as the Yukon and Escalade. But as far as how they will fit on your 2015 GMC Sierra 1500 they will be the same. I have linked instructions for both. Both require front fascia/air dam trimming so the bottom of the receiver will sit about 1 inch lower than the bottom of the fascia/air dam.
view full answer... - How to Determine Ground Clearance With the Curt Front Hitch # C31069I spoke to my contact at Curt and he informed me that the distance from the mounting surface of the Curt Front Hitch part # C31069 to the top of the receiver tube is right at 6-3/4 inches. You will need to measure from the mounting point on your vehicle down 6-3/4 inches to determine where the hitch opening will be. For more install info check out the install instructions I attached.
view full answer...
- Front Hitch Recommendation for 2016 Chevy Silverado 4x4 for Best Ground ClearanceThe front mounted hitch receiver that will provide you the most amount of ground clearance on your 2014 Chevrolet Silverado 1500 is the Curt Custom Fit 2 Inch Hitch, # C31069. This hitch measures 9.52 inches from the frame mounting flange to the bottom of the hitch receiver opening. I have included a picture which illustrates this measurement. The Draw-Tite Front Mount Trailer Hitch Receiver, # 65064, that you mentioned reduces ground clearance just a hair more at 9.62 inches.
view full answer...
- Replacement Hardware For Curt Front Mount Hitch C31069You can get replacement hardware right here for the Curt Front Mount Trailer Hitch Receiver # C31069, and what you will need is the following: - Replacement Hardware Kit for Trailer Hitches # RHK All you need to do is click # RHK, enter "C31069" in the "Hitch Item Number" box, select "Curt" from the “Manufacturer” drop-down menu, hit "Add to Cart" and you're set.
view full answer... - Adjustable Trailer Hitch Ball Mount For Curt Front Mount Receiver On a 2017 Chevrolet Silverado 1500I do have an option for you as there are no adjustable ball mounts with that long of a shank. You can use the Equal-i-zer Weight Dist Shank # EQ90-02-4600 with the Curt Front Trailer Hitch Receiver # C31069 on your 2017 Chevrolet Silverado 1500. The shank is 14" long from the center of the hitch pin bolt to the vertical mounting holes. Those vertical mounting holes will allow you to use the Ball Mount Adapter # BA-1 which is held place with the Pins and Clips # CABPN-2. If you are using...
view full answer... - Differences in Height on Curt Front Hitches for 2014 Chevy Silverado 1500There is going to be a bit of a difference in how each hitch hangs. The # C31012 measures 8-3/16" from the frame rails to the top of the receiver tube while the # C31069 measures 6-3/4" from the frame rails to the top of the receiver tube. I have added a link to a video install of this hitch for you to take a look at as well.
view full answer...
Do you have a question about this Front Receiver Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Video Edited:
Joshua S
Written by:
Laura H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Updated by:
Noah M
Test Fit:
Jacob H
Video by:
Thomas T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
David
6/22/2023
Turned out to be a bad ideal. It hits the curb sets too low and I wanted it for a bike rack and the bikes getting way of my Vision so I ended up taken it off period