No Drill Class III Trailer Hitch Fit for 2019 Ford Edge SEL
Question:
Hi, Just wanted to verify before purchase that this will work for 2019 Ford Edge SEL.. I had to check with a local instal... Pep Boys, to see if they could install, they would but wont do it if there is extra drilling involved,,, everything has to match, pre-existing holes., so Im just making sure. Thank you,
asked by: Yvonne W
Expert Reply:
According to Draw-Tite, the # 75234 Class III hitch is a fit for all models of the 2019 Ford Edge with the exception of the Titanium model. This is a no-drill installation, but one small stud on the underside of the vehicle above the muffler will need to be cut off using a Dremel tool or die grinder. I've linked you to the installation instructions and an installation video showing the hitch being installed on a 2018 Edge.
If you'll be towing with the hitch, you'll need a trailer wiring harness, a ball mount and a trailer ball in the correct size to complete your towing system. For a wiring harness, use # 118805 and # C45070 for a ball mount. For a 1-7/8 inch trailer ball, use # 19260 or # 63845 for a 2 inch ball. You'll also need a # PC3 pin and clip.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 4500 lbs WD GTW
- 2 Inch Hitch
- 675 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Hitch for a 2023 Lincoln Nautilus
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Curt vs etrailer Trailer Hitch For 2023 Lincoln Nautilus
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Trailer Hitch Fit for 2019 Ford Edge Titanium Recommendation
- Q&A: Trailer Hitch Recommendation for a 2015 Ford Edge Sport With Hidden Crosstube
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: 2022 Ford Edge Best etrailer Trailer Hitch Recommendation
- Article: Which Hitches are Made in the USA
- Article: Trailer Wiring Diagrams
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: My Trailer Hitch Doesn't Fit
- Article: Towing a Trailer? Let's Talk About Brake Controllers