T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
(448 reviews)
Price: $66.66
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118379
Retail:$87.11
Our Price: $66.66
You Save: 23%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (448)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring - 118379
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Includes tail light converter.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection points behind tail lights
- Plug in T-connector
- Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 2.1 amps per circuit
- Tail lights: 4 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.
Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
Tail Light Converter
A tail light converter is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. The tail light converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
118379 Tow Ready T-1 T-Connector - 4 Wire
Installation Details
This Product Fits The Following Vehicles
- 1989 - 1995 Toyota Pickup
- 1989 - 1992 Toyota Pickup
- 1993 - 1995 Toyota Pickup excluding T100
- 1998 - 2004 Toyota Tacoma
- 1996 - 2004 Toyota Tacoma
- 1995 - 1995 Toyota Tacoma 1995.5 Mid-Year model
- 1995 - 1997 Toyota Tacoma 2 Wheel Drive
- 1995 - 1997 Toyota Tacoma 4 Wheel Drive
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Too difficult to install
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118379
Average Customer Rating: 4.9 out of 5 stars (448 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Includes tail light converter.by: Steve04/03/2023
2019 Toyota Tacoma
The wiring harness was fairly easy to install. The only issue I had was disconnecting the old light harness in order to connect the new one. I’m thinking because I have a 19 year old truck (2004 Toyota Tacoma) is the reason it was a little difficult to disconnect. Aside from that everything else was pretty straightforward, including the bracket for the flat connector for the lights.
by: Edward 02/15/2023
Easy installation, way better designed than what it replaced.
by: Kirk -02/04/2024
1989 Toyota Pickup
Thank you for a Quality Harness, Shipping was on time (Before Actually), it was plug and play (Easy) to install and worked as expected! :)
by: Mark11/16/2023
Harness installed, very easy..... still haven't installed Hitch!!!!
by: Chad 04/22/2024
2003 Toyota Tacoma
This combo of parts worked great. Zero issues with functionality or fit. Would recommend to anyone, professional or shadetree.
by: Robert R.08/14/2011
1999 Toyota Tacoma
This wiring harness is easy and works. My 99' Tacoma doesn't have a connection for a trailer. I have put off having someone wire it for years. Mainly because of the expense and having to make time to take it somewhere. It was going to cost over $100.00 to have it done. Then I stumbled across etrailer.com while trying to see if there was some way to wire my truck myself. It took me fifteen minutes to hook this harness up. The reason it even took that long was because I was a little picky about how and where I wanted the plug to hang. Why can't everything be this simple?
by: James 02/03/2024
2003 Toyota Tacoma
the kit was well designed and manufactured. It took a little bit of thought but time to completion was 30 minutes. The best part is it worked.I would recommend your company to anyone
Cheers
Jim
by: Joel06/01/2018
2000 Toyota Tacoma
The installation was exactly as the video shows. I did not install a bracket or tube cover for the wires. The installation took between 15-20 minutes. I used extra black zip ties to make sure the wiring is secured and doesn’t droop down. Other than that, it’s a very simple connect and play set up.
by: ScrapIron 11/16/2017
2003 Toyota Tacoma
I purchased the T-One vehicle wiring harness for my 2003 Toyota Tocoma. It was exactly the correct fit for my truck. This plug n play kit took no time to install and it completed my trailer hauling project. The I am extremely satisfied with the products and the customer service was impeccable. I would recommend this product and if you need any trailer supplies use etrailer, you be glad you did.
by: Moffitt,06/22/2020
2001 Toyota Tacoma
Easy installation on the hutch and trailer wiring kit... I’m extremely pleased with my purchase . Great product, company and service! Quick shipping and excellent customer service.... I highly recommend etrailer !!
by: Casey 07/20/2023
Still working great 1 year later - thanks E-trailer!
by: Rob08/08/2022
2003 Toyota Tacoma
I think this was the same one that I had installed on my 03 Tacoma back in '05. I recently found that the output voltage for the right-side brakes/turn signal was something like 5VDC, not enough to light up the incandescent trailer bulbs. It must be the 'conversion' box going bad. I really liked the integrated cap for the 4-connector plug and I figure that 17 years was a good run, so I got it again. Installation was about a 4.5 hour job, but that was partially due to the fact I had to pull out the old one. Plus, I had a 7-way round plug (with brake controller) installed later too, and the shop that did it tapped into this 4-way wiring. I tried to re-connect that one, but I ran out of time. Once done, when I tested it with my 5x8' utility trailer, all the lights lit up like they were supposed to. It was a fun project and anyone with even a small amount of technical know-how will be able to do this. Only questionable part is where to run and tie off the wiring, but not a big deal.
Katrina B.
8/15/2022
For the wiring, you would begin on the left, drivers side of the vehicle, then you would route the connector across the vehicle along the vehicle frame and out from under the vehicle through the right, passenger side tail light opening.
by: Gerald11/30/2023
Works as expected.
by: Louie01/23/2022
2003 Toyota Tacoma
Easy installation and everything worked like OEM.
by: Jason07/18/2018
2003 Toyota Tacoma
This was very simple to install just as the instructional video guided me through. Very helpful.
by: Dave S.01/15/2015
2003 Toyota Tacoma
I just received my new wiring harness yesterday, and I'm anxious for this weekend so I can get it installed. I've watched the instructional video and read the instructions that came packed in the package and nothing could be simpler. I bought this unit as a replacement unit. Shortly after buying my truck new in 2004, I installed a cheaper version using "SCOTCH-LOKS" to tap into the wiring. The original converter failed is the reason I bought your product. The only modification I needed to make was cutting off the molded on 4 pole connector so that I can use my existing BERG 7 round pin connectorthat fits my 5 trailers, 2 with electric brakes and batteries, 2 regular box trailers, and 1 flatbed trailer. I highly recommend using a quality di-electric grease at the vehicle plugs, it will greatly reduce the chance of corrosion at the plugs.
Thank you for a fantastic product.
Dave S.
1/15/2016
I havent had any problems since installiing it.
by: Dan B04/29/2017
2004 Toyota Tacoma
First off I watched both YouTube videos, one on the hitch and the other on the wiring. The videos told me what parts I would need to finish the install. Tools: I would suggest a impact wrench or drill. If using a wrench be careful the bolts are on there tight and when they let go you can scrape your hand on many different parts of the truck (not fun). The bumper and brackets disassemble is straight forward, have someone help hold the hitch while you put in the bolts. Put the brackets on and line up the holes but don't tighten all the way. When both sides are on you want to make sure they are both spaced the same. Then tighten the bolts. When running the wire just follow the wiring that is already there, I used about 15 plastic ties. The hitch is heavy and built like a tank, I will use it for occasionally pulling a 4x8 trailer with a motorcycle. Overall very satisfied with the hitch, wiring and etrailer.com.
Dan B.
4/29/2018
I haven’t had one problem with the hitch or the wiring. Great products.
by: Richard06/25/2019
Installation could not have been easier! Super straight forward instructions for both the wiring harness and the hitch, which I also bought from etrailer. Even had a instructional video for the wiring. I've used this 2" hitch on my 1999 Toyota Tacoma to haul my utility trailer loaded with 2 vintage Italian scooters on 600 mile+ trips and never had any issues. I also use it to haul my 17' sailboat with no problems. Lights always work!
Richard V.
6/26/2020
No issues whatsoever. As good as the first dayboth hitch and wiring harness!
by: Alan S.04/21/2017
1999 Toyota Tacoma
My order, class II trailer hitch and wire harness, was on time and delivered with no missing parts. George sent me an email letting me know that the order shipped and then followed up to insure it was correct once received, I highly recommend George and his Company. They are honest and dependable people, which is a hard quality to find these days. Quality of the hitch was outstanding and the wiring harness went in without a hitch, sorta speak.
Thanks Etrailer, I will tell everyone I know about you.
Alan S.
4/24/2018
your product has done a Great job. no problems with it and have used it many times. I as well would like to thank you for the follow up email. in today’s busy world it is not every one that takes the time to do this. If more companies would go back to the idea of Great Customer Service, as you have, it would most certainly be a much better world to live in.
by: Ken 03/29/2023
Wayne at etrailer was great, new exactly what I needed, got it right away and it fit perfect. Thank you Wayne.
by: Chris12/21/2022
Easy to install and works great with the OEM connectors. Well designed for easy installation with the end user in mind. Keep up the good work.
by: David02/25/2018
1996 Toyota Tacoma
I really like this method of connecting wiring harnesses , there are no splices ( much better than in the "old days" ) .
splicing always seems to fail at some point .
the connectors fit perfectly and the wiring itself was just right, on lengths.
it took me about 15 minutes to install .
the only issue i had was that it was a little sung getting the T connectors to fit in the "taillight well" - it may have been easier if they had , just a inch more wire between them so they would bend away and down from the bulb fixtures better .
i haven't connected my trailer yet , but i have no doubt it will perform correctly , and all my truck lights are operating normally.
not entirely sure i understand what duty the converter performs , however i am happy that it includes one (from what i have read )
David
2/25/2019
Still working great !
by: Andy06/04/2013
1999 Toyota Tacoma
Above excellent. I had previously bought a standard cut and wire in cheap unit and took an hour to cut and slice this in realizing that this did not include a brake wire adaption. I was going to figure it out and make it work. I saw this unit while looking for parts and thought I would try it and see if all worked. Someone would be crazy not to buy this unit. It is very very fast to hook up, accurate quality connectors and wire and EVERYTHING works just like the pickups tail lights and you don't need an Auto Technology degree to make all work instantly. The price is ridiculously low and having used this unit once I would instantly pay double next time. Also the big plus is you keep total integrity of your trucks wiring. We live in salty road winter conditions and it is not good to splice chassis wiring if you don't have to. This is a terrific product.
Andy
6/4/2014
Had the product for a year and it works flawlessly. Anyone would be nuts to try and wire in seperate wires as this impacts the wiring integrity of the original vehicle plus this product is ridiculously inexpensive, great quality and super fast and easy to install. Very good after market automotive product and this is from retired Euro Car Mechanic.
by: Nancy08/03/2017
Kia Soul
Shawn B. (& everyone I talked with at E Trailer) was wonderful.
Great phone support. Great products. We did a great job installing the wiring harness.
Made me wonder why we originally took it to a "professional" trailer sales & service place in Ogden UT. They hacked into our wiring & created problems.
I will continue to be a grateful customer.
Finding good people who know their stuff in todays world is a soul healing event.
Thank you E Trailer!
Nancy
8/19/2018
Still Great & no problems, thanks to great instructions from etrailer team! They know what they are doing and they know their products. RARE & WONDERFUL get a lesson [Big box hardware stores] 2002 tacoma wiring harness
by: Francisco09/02/2023
Simple to install, great product!!
25
448
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Comparison of Tekonsha and Curt Wiring Harnesses for 1999 Toyota TacomaThe amp draw on the product pages for both the # 118379 and the # C55379 wiring harness is how much draw the harnesses are designed by their manufacturers to handle. The amount of draw will be determined by the lights on your trailer. The Curt is designed to handle a little more than the Tekonsha harness, however they've both been tested on a 1999 Toyota Tacoma like yours.
view full answer... - Could 4-Way Trailer Wiring Harness be Used to Power Taillight Circuits of 7-WayYes you can use the # 118379 as a way to power the taillight circuits of a 7-way. It would be just a matter of cutting off the 4-way and wiring to the correct pin on the 7-way like you can see in the attached picture.
view full answer...
- Parts Needed to Install 7-Way Trailer Socket on 1994 Toyota PickupYou can use our brake controller installation kit # ETBC7 to install a 7-way trailer socket on your 1994 Toyota pickup. If you already have a 4-pole on the truck the kit is all you'll need, but if you do not have a 4-pole you will also need one, part # 118379, which works so long as your pickup is NOT a T100. If you have a T100 the instead use part # 118496. The 4-pole harness will plug in to your taillights and then at the ETBC7 kit to provide lighting, and brake power and 12V power to...
view full answer... - Recommended 4 to 7-Way Wiring Adapters for a Dodge D350 and a 1999 Toyota TacomaWhen you say you need to connect to a 6 blade plug, does the plug have 6 flat blades going around the center, and the round pin in the middle? If so, this would be a 7-Way plug. If your 1999 Toyota Tacoma does not already have a 4-Way plug, you would first need to install wiring harness # 118379. To wire the Dodge D350 with a 4-Way plug, you could use hardwire kit # 18252. To install the hardwire kit, you will need to use the included circuit tester to determine which wires behind...
view full answer... - Parts Needed to Add 7-Way to 1999 Toyota TacomaIn order to add a 7-way to your 1999 Toyota Tacoma you will need to start with a 4-way. The T-One Vehicle Wiring Harness # 118379 is the most reliable option. This will plug into the connection points behind your tail lights for installation. Once you have added the 4-way you will be able to add a 7-way using the Universal Installation Kit for Trailer Brake Controller # ETBC7. This kit comes with the adapter, circuit breakers, wiring, and everything else you need to upgrade your connection...
view full answer... - Recommended Trailer Brake Controller and Wiring Needed for 2000 Toyota 4RunnerFor your 2000 Toyota 4Runner, I recommend the Tekonsha Voyager Trailer Brake Controller - 1 to 4 Axles - Proportional # 39510 with the Brake Control Plug-In Harness # 20127. This is the best controller under the price point you are seeking. Then for your wiring, if you already have a 7-way connector you can use the kit # 5506. If you have a 4-way then you will use the # ETBC7 kit which comes with the 7-way adapter and wiring. If you don't have a 4-way, then you will need that first and...
view full answer...
- Recommended Weight Distribution And Brake Controller For 2002 Toyota TacomaThere are a few things to note when towing a trailer and making sure you are safe when doing so. Based on my online research you should have no problem towing a 3,000-lb loaded trailer. With the weight of your truck being between 2750 and 3705-lbs I recommend a weight distribution system. The owner's manual also states if you are towing a trailer that weighs over 2,000-lbs, a sway control system should be used. If you do not have a trailer hitch I recommend the Draw-Tite Max-Frame Trailer...
view full answer...
- Recommended Trailer Hitch and Towing Accessories for 2002 Toyota TacomaThe trailer hitches for the 2006 Nissan Armada and the 2002 Toyota Tacoma are vehicle specific and unfortunately aren't interchangeable. For a 2002 Tacoma, I'd recommend the Curt Class III hitch, part # 13013. For a wiring harness, use part # 118379, part # C45010 for a ball mount and # 63845 for a 2 inch ball or # 19260 for a 1-7/8 inch ball. I've linked you to some installation videos that you might find helpful.
view full answer... - Fit of Curt 13013 Class III Trailer Hitch on 2003 Toyota TacomaThe Curt Class III hitch, part # 13013 is a fit for all models on the 2003 Toyota Tacoma, regardless of whether its a 2WD or 4WD model. If you'll be towing with the hitch, you'll need a few other items to complete your towing system. For a wiring harness, use part # 118379. For a ball mount, use # 2753 (assuming the Tacoma is at stock ride height using the stock tire size) and # 19260 for a 1-7/8 or # 63845 for a 2 inch trailer ball. I've linked to installation videos for the wiring harness...
view full answer... - 4-Pole Trailer Wiring Harness for 2003 Toyota Tacoma We offer a custom-fit 4-pole wiring harness from Tekonsha that fits your 2003 Toyota Tacoma. Part # 118379 installs easily with plug-in connectors that install at your tail light wiring and one single ground wire that gets attached to the vehicle sheet metal, as shown in the linked video. Since this harness connects between your taillights and their wiring it should not affect your existing spliced connection, but if you wish you can use the red wire for a brake light signal for the 3rd...
view full answer... - Parts Needed to Install Brake Controller in 1997 TacomaYou will need to start with a 4-way since yours is gone now. For that you would want the # 118379. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake...
view full answer... - Troubleshooting Tekonsha 4-Pole Harness 118379 Installation in 2004 Toyota TacomaThank you for your recent purchase of Tekonsha T-One 4-pole wiring harness # 118379 which is a confirmed fit for your 2004 Toyota Tacoma. The two most common causes for a wiring harness to blow vehicle fuses are a short in the trailer's wiring or an overload situation where the total power drawn by the trailer's light exceeds the output capacity of the harness. If you have been using the same trailer with the same complement of lighting all along and it suddenly started having this issue...
view full answer...
- Trailer Brake Lights Not Working when Connected to a 2003 Toyota TacomaDoes your 2003 Toyota Tacoma have a factory tow package and trailer connector? If so then it could be a blown fuse associated with the tow package wiring. Many times, the tow package wiring is separate from the vehicle tail light wiring so the truck brake lights working would make sense. If it is an aftermarket wiring harness such as # 118379 then it is strange that the brake lights on the trailer are not working because the brake lights and turn signals are on the same circuit. This...
view full answer... - Trailer Wiring Harness for a 2003 Toyota Tacoma for a Bully Fire Strip LED LightYes! You can use the Bully Fire Strip LED Light # TLB-001 with trailer wiring harness # 118379 on your 2003 Toyota Tacoma. Like you said, this Fire Strip does not have a reverse light feature. It does plug into a 4-Way flat trailer connector which is what the wiring harness # 118379 has. So you will be good to go with these two parts.
view full answer... - Parts Needed to Install Prodigy P3 90195 Trailer Brake Controller in 2001 Toyota TacomaWe can help you install new trailer wiring to allow use of a trailer brake controller like the Prodigy P3 # 90195, which is an excellent choice for its flexibility and proven reliability. You mention you want a 6-way trailer connector - which we can help you with - but since most applications these days use a 7-way I suggest that to confirm you refer to the linked article on trailer wiring that shows you both 6-pole and 7-way connectors. This will just help you verify which installation...
view full answer... - LED Tailgate Strip Light Recommendation for a 2003 Toyota TacomaThe Bully Fire Strip LED Light # BLS-1101 that you referenced should work well on your 2003 Toyota Tacoma as it is a universal fit light strip that can work on either 48 inch or 60 inch tailgates. It can also be cut in 3 inch increments for a custom fit. It attaches between the bumper and the tailgate and plugs into the 4-way trailer connection of your vehicle. Since you said your vehicle doesn't have a tow package you may be in need of a 4-way trailer light connection. For that you would...
view full answer... - Brake Controller and Wiring Parts, Installation Instructions and Video for a 1999 Toyota TacomaHere is what you need to get your Tacoma ready to tow. The T-1 trialer wiring harness, # 118379, a brake controller, # 90885, and the # ETBC6 brake controller 6 way install kit. The install kit contains everything needed to complete the install, including the 6 way connector and mounting bracket. We have detailed instructions for installation of the wiring harness and brake controller installation kit, and have videos for you to review. The brake controller install kit video shows a different...
view full answer... - Is There A Reese Trailer Hitch Receiver Available For A 2004 Toyota Tacoma Prerunner?I have another option for you, but there is not a Reese brand trailer hitch receiver currently made for your 2004 Toyota Tacoma Prerunner. Instead I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75282 as it is confirmed to fit your vehicle, has the 2" receiver you mentioned, and Draw-Tite and Reese are owned by the same parent company, Horizon Global, making it as close as you can get to a Reese branded hitch. To find the price you will want to...
view full answer... - Adding a 7-Way Trailer Connector and Brake Controller to a 1999 Toyota TacomaTo install a 7-Way trailer connector on your 1999 Toyota Tacoma you will first need to install a 4-Way using # 118379. Next, you will need 4- and 7-Way installation kit # ETBC7. I have included some links that show and explain the ETBC7 installation. For a brake controller to activate electric trailer brakes I recommend the P2 # 90885. It is one of our most popular controllers because of you well it works and its reliability.
view full answer... - Troubleshooting Lighting Issues on 1998 Toyota Tacoma Using Curt T-Connector Vehicle Wiring Harness It sounds to me like the wiring harness has a bad converter and it will need to be replaced. For this you can use the T-One Vehicle Wiring Harness, # 118379. I do recommend that you do a quick inspection of the wiring on your trailer to make sure that it isn't to blame for the bad converter. This is a common problem where a cut or exposed wire on the trailer causes a short and takes out the converter. To prevent this from happening again, any and all repairs to the trailer wiring should...
view full answer... - Are Spacers Necessary When Installing Curt Hitch # 13013 On A 2004 Toyota Tacoma No, you will not have to add any spacers on the driver or passenger side between the bumper and the bumper brackets when installing the Curt Hitch # 13013 onto your 2004 Toyota Tacoma. You will need to remove the two bolts mounting the bumper and remove the bumper from the vehicle. Then you will have to remove the bumper brackets, position the receiver against the frame and install the 1/2 inch bolts. No additional spacers are needed. The trailer hitch has a bolt-on installation with...
view full answer... - Will Hazard Lights Run on a Vehicle Wiring Harness with 4-Pole Flat Trailer ConnectorYes, the hazard lights will run on the same circuit as the running lights. I would recommend a mounting bracket # 18144 as it will keep the connector more secure. I have included installation videos, instructions and FAQ for you as well.
view full answer... - Troubleshooting Wiring on a 1990 Toyota Pickup While Installing Curt # C55379 HarnessI have some suggestions to help troubleshoot your wiring issue with your 1990 Toyota Pickup and the Curt Harness # C55379. Make sure your truck is running when you are testing the trailer lights, not just having the truck in the accessory mode. By having your truck running your trailer will be receiving maximum voltage because the alternator will be running. Check your trailer connector with a circuit tester such as # PTW2993 to verify that you are receiving voltage on each pin. If you...
view full answer... - What Do I Need to Wire a Basic 4-Way Trailer Connector on a 1996 Toyota Tacoma PickupSince the 1996 Toyota Tacoma has separate turn and brake signals, a converter is necessary. Fortunately, there is a plug-and-play harness, part # 118379, available for your Tacoma that makes installing very easy. It simply plugs in-line with the tail light connectors behind the tail light housings. Then you connect the ground wire to a good ground point on the truck frame and you are done. I have added a link to the part and a video of it being installed on a 2000 Tacoma. I have also included...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Joshua S
Test Fit:
Shane T
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Edward
2/16/2024
Product is still working perfectly