To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your Nissan Rogue with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
Specs:
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located inside your trunk, behind the tail lights on both the driver's side and passenger's side. You will need to remove some interior trim or carpeting to access the harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed within your trunk.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (477 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.The online video installation guides are excellent! I've never attempted something like this on my car before, but the clear instructions made it a snap. I had the hitch receiver and the wiring done in a couple hours. It was a fun project to do and I learned a few things along the way.
Had my wiring harness installed and no issues with my trailer lights. I would recommend this product.
Wiring kit was easy to install, the hard part was running the wire to the front of the car for battery power. Other than that, it was so simple, even a 64-year-old can do it.
Quality products, only gave it a 4 star due to the fact that the mounting holes on the hitch didn’t line up great. Had to wrestle one of the five bolts in. Other then that I would do business with etrailer again!
With the helpful videos this was very easy. We luckily had a car lift in a shop to use. We installed and plugged it in and works great. Now we can go pick up the boat and boat trailer that was given to us.
Thank you etrailer.com! Not only did the hitch I ordered arrive sooner than expected, it was super easy to install...in about 30-40 minutes. The wiring harness took a bit longer, but thanks to the "how-to" video, we got it installed perfectly, didn't break anything...and it works!! We did the complete install in our driveway, without any jacks. Luckily, I fit under the car with more ease than my husband and was able to thread the wiring just like the video showed. By the way, I'm a 64 year-old grandmother and if I can do this, anyone can. The hitch looks great and we are extremely happy with the entire process, from ordering to install. Thanks John, we will definitely recommend you and your product.
Mike D.
11/14/2013
Hitch and wiring harness install went well everything works - videos were very helpful - BE SURE TO: clean holes opposite the tow hook thoroghly w oil
For the most part I am very happy with this wiring kit. Assembly was easy and everything fit perfectly. However, I didn’t run the hot wire (black) to the battery. That would have made the installation much more difficult. I simply spliced in a 12 volt plug. When I use the trailer I just plug it into the receptacle in the rear of the car. I attached 2 photos of my hot lead. This option works great.
Needed a lightweight hitch and wiring harness for getting a small trailer w/ two kayaks to my favorite fishing holes. Super happy with everything. Would recommend etrailer to everybody that asks.
My product arrived earlier than expected and the packaging was protective and all intact.
The Curt Hitch Includes everything you need for the installation. Right out of the box you can feel and see the quality. It is a bit heavy so I suggest a helper when you’re ready to lift it up and install the bolts. The installation video was awesome and it even used my year/model Nissan Rogue so everything it showed underneath my vehicle was accurate and there were no surprises. The video suggested tying off the muffler and on my model, and I didn’t need to. All in all, the install was much simpler than I expected and I couldn’t be more pleased with the results.
The Tekonsha T-One wiring kit (ordered separately) includes everything you need for the installation, down to wiring connectors and zip ties. Quite impressive. I can’t say enough about the quality and thoroughness of the etrailer installation video. It used my exact vehicle so there were no surprises. I used my iPad, watched the entire video to get a feel, and then used pause and play as I proceeded. The only challenging part for me was running the included 12v wire underneath the body frame to the battery. It was an adventure but I got it done. When I was done, the trailer lights lit up and I couldn’t be more pleased, with the product and the support. Thank etrailer for your excellence. Pretty rare these days.
Very happy with my trailer hitch. Installation of the hitch and wiring was straight forward. Both hitch and wiring videos were very helpful.
This was an exact fit, however, I took away a star based on having to run a constant +12 volts from the rear of vehicle to the battery. It seems that there could have been a connector to the brake light wiring for a constant live 12volts.
worked exactly like it was supposed to . love it.thank you
Works great! The video really helped on the install and broke it down step by step. I did run short on time at the end and just tapped the 12v power outlet in the back cargo area instead of running the power wire all the way up to the battery. Hopefully it doesn't cause any issues in the future.
The product is solid and the video instructions for both the hitch and wiring was absolutely helpful and easy to follow. It is a sure fit for my vehicle. The time it took me to finish the install and wiring is o/a 2 1/2 hrs. And it is because I did not have a lift or a maintenance bay to go under the vehicle.
Hitch was a perfect fit, undamaged in shipment and this 77 year old installed it alone in 18 minutes. Easy to install and prompt service. Intended for use mostly with a cargo carrier.
Recieved the parts 2 days early. Already installed and tested going to use tomorrow morning. Nice job
Here is a picture of the hitch receiver and the electrical plug. My installer decided to keep the plug near the hitch and not in the car when not in use.
Instructions were a little unclear but sufficient. The products are fine so far and seem well-made. I would recommend to a friend. ty
Great product and fast delivery
Easy install. Worked great on our recent 7 week drive to Alaska and back!
The hitch frame fit very well.
Easy to follow instructions. Took about an hour to complete.
Easy to install, local hitch company was going to charge 800, but this simple hitch is as good as any and easy for a monkey to install.
This wiring harness for my trailer that fits my Nissan works perfect This not being my first rodeo I have installed numerous wiring harnesses over the years for so many different cars. I couldn’t be happier with this one. It is clearly the best one I have ever seen and used and the instructions were very good and easy to follow. I’ve been using it for quite some time now and still no problems and I have 3 different trailers I use it on. It is a pleasure to plug it in and see that the lights work perfectly every time. That has not always been the case over the years with other ones
I followed the instruction video and everything went well.
Raul
9/4/2023
Excelente satisfacción
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Alicia
11/12/2023
Its still working wondeful