Curt 4-Way Flat Trailer Connector w/ 60" Harness and Wire Taps
Item # C58044
Retail:$20.31
Our Price: $16.37
You Save: 19%
Confirmed to Fit
1990 Jeep Wrangler
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (113)
- Q & A (0)
- Photos
1990 Jeep Wrangler - Curt 4-Way Flat Trailer Connector w/ 60" Harness and Wire Taps
- 4 Flat
- Trailer Hitch Wiring
- Universal Fit
- No Converter
- CURT
- 5 Feet Long
Quick-splice wire taps let you splice this 4-way flat trailer connector into your Jeep Wrangler. Bonded wires are color coded to make installation a little easier.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately)
- Works with 2-wire electrical systems
- Splices into your vehicle's wiring with included quick-splice connectors
- Bonded wires are color coded (see wire configuration below)
- Includes durable, molded-rubber, standard female output socket
Specs:
- Harness length: 60"
- Max amperage: 7.5 amps per circuit
- Wire gauge: 16
- Limited 1-year warranty
4-Way Trailer Connector Installation
Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use a tester (sold separately) to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector. Once you've figured out the functions of your vehicle's wiring, use the included quick-splice connectors to connect the corresponding wires on the trailer connector. Quick-splices, or "wire taps," offer a quick way to make connections without you having to strip and twist wires. Just place the wires in it and snap the cover down.
The number 1 reason trailer wiring comes up faulty is a bad ground, so make sure your ground wire has a solid and clean connection to metal. To make this connection, you'll need a self-tapping screw and a ring terminal (sold separately).
Wiring Configuration
| Wire Color | Wire Function |
|---|---|
| Green | Right turn and brake light |
| Brown | Tail lights and running lights |
| White | Ground |
| Yellow | Left turn and brake light |
Quick Tips:
We install a lot of wiring harness around here, so we thought we'd share a few tips we've picked up over the years:
- Butt connectors - especially heat-shrink ones - provide the most secure, longest-lasting connection, so we'd recommend you grab a few and swap them out for the quick-splices in this kit.
- Use a circuit tester on the plug terminals once the harness is installed to make sure everything's working. There's nothing worse than figuring out that you have a bad ground or a faulty connection right before you're about to hit the road.
- Be sure to put a little bit of dielectric grease on the 4-way plug to protect the terminals from dirt, grime, and corrosion.
58044 Curt Jeep Wrangler Wiring Harness with Jeep Wrangler End 4-Pole Connector and Wire Tap Connectors - 5' Long
California residents: click here
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Curt 4-Way Flat Trailer Connector w/ 60" Harness and Wire Taps - C58044
Average Customer Rating: 4.7 out of 5 stars (113 Customer Reviews)
Quick-splice wire taps let you splice this 4-way flat trailer connector into your vehicle. Bonded wires are color coded to make installation a little easier.by: acuradm02/13/2024
Perfect length and wired in with ease, Just wish it had a weather proof cap included. but still very happy
by: Will08/02/2023
Sent the wrong part after waiting 2 1/2 weeks
by: Ken Lake10/24/2013
1987 JeepWrangler
This is a standard flat connector for attaching to a trailer. I don't have it installed yet, but it looks like it will work perfectly. The cable is long enough to connect to both rear lights.
Ken L.
10/24/2014
I finally got it installed. My 87 Jeep has had the wiring modified several times in its life so nothing was as it was supposed to be. I finally got all of the previous mistakes unwired, returned it to normal and then added the connection for the trailer. It was easy to install and worked perfectly. I like it and use it all the time.
by: Peter09/09/2018
1997 Pontiac Grand Prix
Wire harness works fine but had no instructions, not even a identifier for which color wire does what. No ring terminal included for the ground wire. I think an end cap should be included on the harness due to the fact that there is power at the plug end any time the vehicles lights are operating. I ordered connector cover 20112, fits well on this harness.
Heather A.
9/10/2018
The 4 pole trailer connector part # C58044 is designed with a green wire, yellow wire, brown wire and white wire. The green wire wires into the right turn wire of the vehicles wiring harness. The yellow wires into the left turn signal of the vehicles wiring harness. The brown wire wires into the tail light signal. The white is the ground wire that needs to be grounded to a clean bare metal surface on the vehicle. A ring terminal that accepts 14 gauge wire such as part # DW05737-1 can be used to ground the white wire. If you would like an end cap on the 4 pole connector I recommend part # 20112 by tow ready to protect the end of the connector. I have also attached a wiring help article to assist with the installation.
by: Gary M.09/06/2019
Will all I can say is it's a well-built good-looking product. It was very easy to install.And easy to wire it up.follow the instructions that you get am 71 years old and I did it All in 45 minutes.
When I was ordering this product customer service went out of their way to help me in any way they could.
I would recommend this company to anyone they are very pleasant people to do business with.and the shipping was right on time
by: Andrei08/20/2018
2004 Pontiac Grand Prix
Hitch delivered quickly. The packaging is excellent. The condition of the hitch is new. The fixing kit, bolts and nuts correspond to the hitch. The video on the site was of great help in installing the hitch. I would like to have a video on the site how to connect the wires, but it's not difficult for an electrician. Problems with the installation of hitches on the car did not arise.
Heather A.
8/23/2018
This Curt 4 pole part C58044 is a hardwire installation. I have attached a video of the hardwire installation for part # 18252 on a 2003 Pontiac Grand Prix. It is a different part number but the same installation. Although, I do recommend part # 56076 custom fit plug and play wiring harness for this vehicle. The plug and play option is a much easier installation.
Helpful Links
Custom-Fit-Vehicle-Wiring/Curt/56076.html
tv-install-trailer-wiring-2003-pontiac-grand-prix-18252.aspx
by: Jeff01/20/2023
While it worked well, I threw out the supplied connectors and used more weather proof versions. But the wiring was long enough and I have had no issues with it.
by: James 03/23/2020
Ran this from the front of the 5th wheel and back so I could pull my other trailer. Another job well done...... Thanks
James
3/24/2021
Harness is still like brand new. The cover cap keeps the contacts nice and clean when not in use. Would buy again anytime.
by: Paul 08/19/2021
Was nice to be able to print out the text of the installation video. Clear and concise.
Paul
8/21/2022
Great, no issues. As good as the day I put it on.
by: Virgil 03/31/2020
Perfect for the application and reasonable price. I believe etrailer.com has spent some time considering which wiring kit is best for each vehicle.
by: Danno04/27/2019
This attached very easily to my tail light wires. When not towing, I just shut it up in my trunk, and when I need to pull, I open the trunk and pull them out. I was very skeptical when I got the kit and saw the instructions, but it worked!
by: Leonora04/20/2021
Had an embarrassing issue with one of the quick-splice connectors breaking - would recommend soldering all wires for longevity.
by: Johnny03/08/2020
I'll start by saying this arrived with my hitch in just a couple of days. It installed easily, as I have experience with wiring. It's high quality, and well made. I did not use the provided clamps that came with the wiring kit. I've found that splicing and soldering the connections with heat shrink tubing for protection is the best method.
by: DonB04/30/2017
1991 Ford Van
Product worked okay, but the connectors didn't. They would not close and tap the main wires. I had to splice the wires in directly. Otherwise, It works.
by: MitchB06/13/2019
Easy install. Performs exactly as advertised. You will have to buy a special electrical kit to be able to hook up trailer lights.
by: Bill M11/25/2016
2002 Dodge Neon
Looked like I would need more "stuff" to hook up my wiring harness.
However with the help of on line installation instructions.
Mission accomplished.
by: Dan D.03/31/2017
I have bought several items from etrailer for several years and I have never been disappointed, mislead, or had to return any of them. I have always found them to have several selections, thorough descriptions, competitive prices, and reasonable shipping charges. I live in a small town about an hours drive from any place adequately equipped for trailer needs. Internet shopping has solved this problem for me. Thank you etrailer.
by: David05/21/2013
2012 Ford F-250 and F-350 Super Duty
Description of product should in bold letters describe that this is not for the trailer but instead for the vehicle. Product is of no use to me.
Dan A.
8/28/2013
Thanks for posting that. I was wondering the same thing. I need the other end, for the trailer to tow with my truck.
by: jim01/20/2017
2001 Ford F-250 and F-350 Super Duty
I have ordered many times through etrailer.com and have never been disappointed. Great service and ever good products. I wish you were in my home town.
by: Will M.02/27/2014
Great product and at a great price, "etrailer" has now become my number 1 stop shop for all my trailer needs now. Due to speed and unbeatable price.
by: Tom 03/05/2020
I replaced the old wiring harness with this new one. Looks like a very good product.
by: Denny12/06/2016
Dealing with etrailer has been nothing but a joy to do business with. They have a great selection and very reasonably priced. Fast service and delivery. I wouln't hesitate to do business with them again. Looking at their products is like being a kid in a Candy Store.....lol. Their products are first rate quality.
by: Adam 08/20/2022
Just what I needed. Splice taps went right in the trash though. Crimp caps are reliable.
by: Ryan04/09/2022
Very easy to install, hardest part is putting the trunk liner back in place. Watch the YouTube video to get the correct wire colors.
by: Nick 04/20/2021
needed this to splice into an existing harness setup. works great. no problems
25
113
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Troubleshooting Curt T-Connector Wiring Not Working for 2021 Subaru WRXThe Curt T-Connector Vehicle Wiring Harness # C56259 is designed to work with your 2021 Subaru WRX, but if you've had it that long and reinstalled it that many times I wonder if the wiring is just worn out. Here's what I recommend doing to determine if the issue is compatibility or just the wiring itself: Connect all of the wiring as the instructions call for it, and then use a circuit tester to see if the correct signals are on the correct wires prior to the converter box. Then do the...
view full answer... - Trailer Hitch Receiver For a 1978 Ford Bronco Custom XLTThe Curt Trailer Hitch Receiver # 14001 is designed to fit your 1978 Ford Bronco Custom XLT as long as you have a standard or step bumper. It will not fit if you have a roll pan style bumper. The Curt Vehicle Wiring Harness # C58044 will allow you to splice into your factory tail light wiring so you will have a 4-way flat. This is the common connector used on small trailers and will also allow for Auxiliary Lights # C53201.
view full answer... - Trailer Hitch, Wiring, and Brake Controller for 2010 Mitsubishi Fuso FE145You were on the right track already with the # 41990 for your 2010 Mitsubishi Fuso FE145. There are no custom fit hitches so a universal weld-on is the only option. We have the # 41990-07 that comes with 7" brackets, the # 41990-16 with 16" brackets, or you can have a fabricator make custom brackets for the hitch. To add a 7-way you will need to start with a 4-way. The Curt # C58044 will splice in for installation providing you with a 4-way. Then you will need the # ETBC7 which will upgrade...
view full answer... - 2009 Smart fortwo Parts Needed for Towing a TrailerThe parts needed to start towing with your 2009 Smart fortwo include the following: - Curt Trailer Hitch Receiver # C11020 - Curt 4-Way Flat Trailer Connector # C58044 - Mounting Brackets # 18144 and # C83DR - Ball Mount (see attached helpful article) Please note the correct ball mount for your setup will have a rise but it all depends on how tall of a trailer you have. If you check out the linked article it will help you choose the correct height needed. Current pricing can be found...
view full answer...
- Recommended Trailer Hitch Receiver For 1998 Blue Bird TC2000I would be happy to help! While there is not a custom fit trailer hitch receiver for your 1998 Blue Bird TC2000 your best option is going to be going with a universal heavy duty trailer hitch like the Draw-Tite # 41990-07 with 7" tall mounting brackets, or the # 41990-16 with 16" tall mounting brackets. These options fit frames between 18-44" wide which should be perfect for the frame on your vehicle. You will need to have a qualified welder weld the hitch to the frame of your TC2000. Both...
view full answer... - Tail Light Converter to Combine Separate Stop and Turn Lights for TrailerIn most trailer wiring the stop and turn light signals are combined into one circuit for each side of the trailer. 4-pole wiring uses a yellow wire for the combined left-hand stop/turn signal and a green wire for the right side. 7-way wiring also combines these light functions. You can refer to the linked article on trailer wiring. If you are looking to connect a motorcycle's separate stop and turn lights to a trailer whose lighting is combined you can use Roadmaster part # RM-732. This...
view full answer... - How To Put a 7-Way Plug In The Bed And On The Back Of A 2023 Ford F-350 Cab And ChassisI can definitely help and get you set up. If your truck does not have any factory trailer wiring we will basically have to do this from the ground up. First you will install a 4 pin connector part # C58044. This will simply splice in using the included quick splice connectors. Next you will need to install the universal 7 way install kit # ETBC7. This kit includes all of the components you will need to upgrade the existing 4 pin connector to a 7 way. You will also have everything needed...
view full answer... - Can I Tow Two Trailers?There are several things to consider when it comes to double towing. First, make sure it is legal in the areas you will be driving. In the west and midwest it is gererally allowed. Most states on the eastern seaboard do not allow it. Even if it is allowed, there may be certain requirements and restrictions state to state. Next, the second trailer will need to be lightweight so as not to require brakes. Generally, if a trailer has brakes you should be using them. Next, you will need...
view full answer... - Recommended Rear Hitch for a 2016 Keystone Montana 3721 5th Wheel TrailerFor your 2016 Keystone Montana 3721 5th Wheel Trailer, I recommend the Curt Adjustable Width Trailer Hitch item # C13704. This is a class III hitch that fits trailers with frames between 22" to 66" wide. It will work on box frames, C-channel frames, or I-beam frames. This hitch can be installed with included hardware or welded to your trailer's frame. It will provide plenty of capacity with a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. I do recommend checking with the...
view full answer... - Recommended 5th Wheel Rails, Hitch & Wiring Harness for a 2011 Ford F-350For your 2011 Ford F-350, I recommend checking out the Curt Custom 5th Wheel Installation Kit for Ford - Carbide Finish # C16424-204. This is an above-bed rail system that will easily install to your 2011 Ford F-350 and will provide a mounting point for a 5th wheel hitch like the Curt A20 5th Wheel Trailer Hitch w/ R20 Slider # C16541. Also. these rails will work with Curt, Draw-Tite, Hidden Hitch, Husky, Valley, & Reese 5th Wheel hitches. This hitch has a maximum towing capacity of 20,000-lbs,...
view full answer... - Replacing Damaged Vehicle-Side 4-Pole Connector on Curt Wiring HarnessYes, you can replace just the damaged connector on the 4-pole harness on your 2013 Hyundai Santa Fe GLS. Hopkins part # HM48205 includes both vehicle- and trailer-side connectors (giving you a spare for the trailer) and quick-splice connectors. Similar products you might prefer include # C58044 that gives you a 60-inch length and # HM48030 which features an ergonomic-style plug. You will connect the white, brown, yellow and green wires color for color. I suggest wrapping the splices with...
view full answer... - Parts Needed To Add a Brake Controller to a 2008 Ford F-750The only other thing you'd need if you don't have it already is a 7 way at the rear. If you do have a 7 way then you're all set with whichever brake controller you choose, like the Tekonsha Prodigy P3 Trailer Brake Controller # 90195. If you don't have a 7-way, then you're going to need to add one - starting by adding a 4 way using # C58044. From here, we can add our 7-way with # ETBC7. Once you're at this stage, you can add your brake controller.
view full answer... - Curt Trailer Hitch Receiver and Wiring Compatibility For a 1972 Chevy K10 Pickup With Step BumperYes, the Curt Trailer Hitch Receiver # 13028 will fit with the standard step bumper on your 1972 Chevrolet K10 pickup with 34" wide frame. This receiver is rated for a maximum tongue weight of 600lbs and trailer weight of 6,000lbs. Capacity increases to 1,000lbs of tongue weight and 10,000lbs trailer capacity when using a weight distribution hitch. Do not exceed the mechanical limits of your K10 given by Chevrolet. Drilling is required for installation. The Curt Vehicle Wiring Harness...
view full answer... - Trailer Hitch For 1985 Chevy G30 VanDefinitely not as that's for mid-2000s Silverado/Sierra trucks; the trailer hitch with the highest capacity for your 1985 Chevy G30 van is the Curt Trailer Hitch Receiver # C13016. This has at 6,000 lb towing/600 lb tongue weight capacity that can reach up to 10,000 lbs towing/1,000 lbs tongue weight with the use of a weight distribution hitch. If you are indeed towing with the # C13016 and also need a 4-way wiring harness, the right fit is part # C58044.
view full answer... - 4-Way Wiring Harness Recommendation for a 2004 Ford ExpeditionIf your 2004 Ford Expedition has a factory 7-way installed on it the Curt Harness # C55384 that you referenced would work on your vehicle and would provide it with a 4-way. If you don't have a factory 7-way you would instead need the Curt harness # C58044.
view full answer... - What Cargo Carrier and Hitch do You Recommend for My 2015 Smart fortwo?We definitely have what you are looking for. While we do not have a hitch that can attach directly to your bumper of your 2015 Smart fortwo, we do have a hitch-mounted carrier that you can use after the hitch is installed. For the hitch, that is the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11020. Not only does this hitch provide you with 200 pounds of maximum tongue weight capacity and 2,000 pounds of gross towing weight capacity, it also comes with a premium gloss...
view full answer... - Parts Needed to Add Wiring Harness to 1971 Cadiallac EldoradoIt sounds like you might be trying to add a wiring harness to tow a trailer with your 1971 Cadillac Eldorado and there is not a custom harness for this vehicle, but you could use the Curt Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 60" Wire Lead # C58044 and hard wire one in. This would be the only available solution to accomplish this. I've linked an installation video of this that you can use as a rough guide during the process, as well as a helpful article we did on...
view full answer... - Recommended Hitch for Towing a Car with Mitsubishi Fuso FE180 with Lift GateIn order to determine if you can tow a car behind your Mitsubishi Fuso FE180 with lift gate you will need to check the owner's manual to determine the towing capacity for your specific model and configuration. Assuming the truck has the capacity to tow the car you are wanting to tow, I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" #41990-16. This hitch will fit as long as the outside to outside distance between the frame members isn't...
view full answer... - Parts Needed To Install A Brake Controller On A 1980 Dodge W400 PowerWagonIf you're referring to what you need to install a trailer brake controller like the Redarc Tow-Pro Elite # RED44FR on your 1980 Dodge W400 PowerWagon; you'll also need to install a 4 flat trailer connector # C58044, if not already present, and add a 7 way connector # ETBC7 if you don't already have one present. If you already have all that, you can install # RED44FR, wiring the black wire to the positive terminal on your vehicle battery, the blue wire to the corresponding blue wire on...
view full answer... - Does Curt Trailer Wiring Harness part # C58044 Fit 2005 Ford MustangYes, we have confirmed with Curt that their universal style trailer wiring kit part # C58044 that you referenced is the correct fit for your 2005 Ford Mustang.
view full answer... - Does Curt Echo Work With 2003 Chevy Blazer?The Curt Echo # C51180 will work with your 2003 Chevy Blazer. To install it would require the use of Installation Kit # ETBC7L and a 4-way connector # C58044. I have added a link to video reviews for you as well.
view full answer... - Trailer Wiring Harness for 2017 Cadillac XT5 Without Factory Towing PackageFrom what I've been able to determine from my research, all of the 2017 Cadillac XT5 have the plug that is used to connect a trailer wiring harness, so the Tekonsha # 118720 should work for you. If for some reason the plug has been removed, you would need to hard-wire in a harness like the Curt # C58044, but this is extremely unlikely.
view full answer... - How to Install a Redarc Liberty Brake Controller on a 1974 Ford BroncoInstalling the Redarc Tow-Pro Liberty Brake Controller # RED24FR on your 1974 Ford Bronco will require a few things to get up and running. I wasn't sure if you meant you had a pre-existing 7 Way on your Bronco or not, so I will be starting from scratch. If you do already have the 7 Way installed, you can skip ahead a bit. I do have to mention that I included videos for all these products, but they will just be examples as they will not be for your vehicle. So lets start with wiring. You...
view full answer...
- Will 4-Way of Curt Wiring Harness # C58044 Connect to 4-Way of Trailer with 5 WiresThe 5-wires that are ran to your 4-way means that you have a wishbone 4-way. That means that the running light circuit has two wires ran for each side of the trailer. The Curt 4-way part # C58044 would work well with this. The running light circuit of this kit uses only one wire but will work fine attached a 4-way that has these circuits split out for both sides.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Edited by:
Leah B
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Sue W
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Updated by:
Sabrina W
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
8/4/2023
Oh my goodness! Customer Service will be in touch as soon as possible.