Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # C56208
Retail:$101.95
Our Price: $62.20
You Save: 39%
Confirmed to Fit
2015 Jeep Cherokee
without factory tow package
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (235)
- Q & A (0)
- Photos
2015 Jeep Cherokee - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Trailer Hitch Wiring
- 4 Flat
- Powered Converter
- CURT
Quickly and easily install a 4-way trailer connector on your Jeep Cherokee with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily
- Locate connection points behind tail lights
- Plug in T-connector
- Run hot lead to car battery
- Includes powered tail light converter that connects directly to battery to avoid overloading vehicle's electrical system
- Constructed using surface-mount technology (SMT) for consistent, reliable performance
- Maximizes trailer light yield and intensity while producing minimal heat
- Ensures superior operation in rough road conditions
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 3 amps per circuit
- Tail lights: 6 amps per circuit
- Limited 1-year warranty
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
Powered Tail Light Converter with Surface-Mount Technology
A tail light converter is built into this T-connector. This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
56208 Curt T-Connector - Surface Mount Technology - 4 Wire
Installation Details
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - C56208
Average Customer Rating: 4.7 out of 5 stars (235 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.by: RichG09/28/2017
2014 JeepCherokee
On day one I installed the Curt C13172 hitch in about an hour using a pair of Rino ramps. Day two I installed the C56208 T connector harness also in about an hour. Thanks to your videos it was trouble free.The most time consuming part was feeding and securing the main power lead from the back to the front. etrailer rocks!! Your website made it easy to research and select the right products for my 2014 Cherokee Latitude. I shopped your prices and may have been able to save a buck or two but the comfort of your knowledge and great how-to videos showed me you deserved my business.
by: George L06/22/2018
2018 JeepCherokee
This was the perfect addition to my 2018 Cherokee!
The wiring was perfect and the instructions were easy to follow!
I’m an “advanced” DIY guy so I took it a step further. I had the factory hitch installed at Jeep as part of the purchase. (Wiring excluded) I coupled this 4 flat T- Connect with the Mopar multi tow and 4 flat wiring for a nice factory look. I also ran the power wire through the cab and firewall to ensure zero weathering. This did take some extra time. Otherwise, the entire install would have been about 90 mins!
Want an easy buy for a clean look ?
Buy this, the hitch and a mounting bracket!
Thanks etrailer!
by: Andrew B.07/03/2014
2014 JeepCherokee
Great product. I bought the 2014 Cherokee tow hitch and wiring harness. Received shipment in a reasonable amount of time and at a great price. In good condition and came with user friendly instuctions. Looks and works great! I would recommend this to other users.
by: Ron m09/09/2016
2016 JeepCherokee
I have a 2016 jeep Cherokee Trail hawk. I put the curt-hitch and T connector wiring harness for the trailer lights on in about four hours.took my time,very easy installation good product.
by: James A.10/18/2014
2014 JeepCherokee
All went well. It took more time but was relatively easy. The instructions to pull down on the tabs but it should be push up so the plastic assembly would disengage form the bumper panel. Electricity went well but I have an engine light on which means I need to up grade my computer if it does not go off. Checked OBD codes and their were none.
by: Michael 05/16/2024
Complete set. Prompt delivery.
by: J. Dave03/16/2024
Very fast and Excellent products
by: Douglas 10/01/2023
2015JeepCherokee
Very easy to assemble with T-Harness,Works perfectly.
by: Daniel 01/05/2024
Easy to setup.
by: Craig 01/30/2024
Great communication
Great service
by: Brian M.04/03/2017
2016 JeepCherokee
Installed on my 2016 Cherokee Latitude. Followed the video and the installation went well. Instead of using the butt connectors I soldered and shrink wrapped my connections. If you have the 9 speaker with subwoofer, you have to remove the two screws from the subwoofer and pull it out toward the interior to get the T connector in the hole on the passenger side taillight. Wiring kit is great and high quality. Shipping was fast. Thanks etrailer for a solution for those without the factory wiring.
Brian M.
4/4/2018
They are doing fine and holding up well..satisfied. Thanks for checking.
by: Brody 11/08/2023
Arrived in excellent condition.
Delivery was free and it only took two days.
If I think of it I’ll post again once the install is complete.
by: Chris03/09/2017
2017 JeepCherokee
Needed this product to supply ample current to my trailer lights since my tow vehicle uses LEDs instead of traditional light bulbs. Was easy to understand the instructions and install. Works great!
Chris
3/12/2018
The T-Connector works beautifully. Installed easily and quickly. Ive wired many vehicles for towing and this is the way to go!!
by: Keith05/12/2022
My resent experience with etrailer will cause me to consider other options in the future.
I placed an online order for a trailer hitch. A couple hours later I realized I needed a wring kit, so I called to speak to a representative to see if it could be added to the previous order. I was assured that the two orders would be arriving together.
The delivery arrived a few days later, so I scheduled an installation with a professional installer. When we opened the box, we discovered there was no wiring kit. The hitch installation was scheduled and completed without the wiring.
Upon investigation I discovered the wiring kit was not added to the original order and did not ship for several days even though it was in stock. When I called to inquire, no explanation was given. The wiring kit arrived over a week later requiring a second installation appointment and additional cost.
I will definitely look for an alternative source in the future!
by: Bobby B.01/27/2017
2015JeepCherokee
The video covered a 2015 Jeep Cherokee. My 2015 Jeep Cherokee came apart a bit differently than the one in the video. This is what I would call a intermediate install. If I were to do it over I would order the "2015 Jeep Cherokee T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector" by Tekonsha. This one installs on the inside of your vehicle and you must hang the plug and wire outside your back hatch to use. The Tekonsha wires on the outside of the vehicle and you don't have to open any doors to hang the plug out so you can hook up a trailer.
[link]
Thank You!
by: Nick06/11/2019
Couple problems: first, this does not feed all the way through the frame and out to the hitch. It’s meant to stay in the spare compartment and be dangles out the door when you need it. I decided I didn’t care, and I’ve been using it a year now with no issues. It’s high quality and weather hasn’t seemed to affect it. I’ve driven in rain, snow, and mud (Michigan conditions) with no issues. Only downside is the installation and having to “figure out” some solutions, like running the battery cable down the body from the driver side tail light, or grounding the unit inside the tail light compartment because there isn’t enough wire to ground inside the vehicle. All in all, works, lasts and solves the problem.
by: Derek D.02/21/2019
4 stars because over all its great that it has decent grade wire, almost all the material you need for the parts to be installed, but also has installation videos. I have not had any issues sense I installed it over a year ago. I just wish it came with electrical tape to wrap around the wire as an “extra” cover for the little abrasion the wire endures.
Pro tip: ...always secure your trailer chains and wire high enough off the ground before departing....
by: Jeff R06/10/2020
Works as expected. Plenty of length to route the wires. I didn't have to tug to get them in place or contort in weird positions to get the car back together with the cables plugged in.
I cut the four wires to the trailer connector and routed them through a grommet in the wheel well so I could mount the connector outside. Still plenty of cable even after routing it that way. The instructions were clear and easy to follow.
by: Matt10/04/2017
2016 JeepCherokee
The hitch and wiring harness, work as intended. I ran into a few issues with the rear lip fascia of my jeep Cherokee; but, I was able to ad-hoc the problem and the hitch install was successful. Thanks for the follow-up.
by: Roger 08/06/2018
2017 JeepCherokee
I bought the C56208 wiring harness for my 2017 Jeep Cherokee. It works perfect and was very easy to install. I don't see how they could have made it any easier. I received my harness exactly when it was supposed to be here. I am Very satisfied with the service and quality of the products I have ordered from etrailer.com. I also ordered a hitch and it was very well made, same great service and easy to install. I wish I could give them more stars.
by: Mark K03/08/2017
The Curt T-Connector Vehicle Wiring Harness is by far the best wiring harness I have ever used. The price was below most other wiring kits, the directions were very straight forward and best of all I have been using it for over a year and it still looks and functions like day one. I would highly recommend this wiring harness.
by: Joe J.07/14/2016
2016 JeepCherokee
I couldn't be happier with the 2016 Jeep Cherokee hitch and electrical kit I received. I am a 72 year old retiree who decided after just buying a new 2016 Jeep Cherokee that I needed a hitch. After weeks of researching what products were on the market comparable to my new Jeep and watching the " Excellent" videos, I chose etrailer products.
There where no surprises Installing the hitch and electrical system, in my situation since I did the entire installation myself and being a little creative with my car ramps and floor jack, it took longer than the videos, but the results were still the same.
I have been in the business world for over 50 years and have dealt with many businesses, I must say you guys run a first class operation. In my case from researching your products, to ordering, to receiving, installation and product quality, you are what you advertise. Your continuing communications with the customer through this entire process is great.
Keep up the good work, one satisfied customer,
Joe
by: Mackenzie07/16/2019
Overall happy with the product. The hitch installation was a breeze; however the wiring was a nightmare. The instructions aren’t really that clear so we went online in hopes someone has done it.. and from this website there was a video! BUT, it was completely different from the instructions.. very frustrating but we made it work. I wish it was a little higher because my drop hitch still isn’t enough to get the trailer up high enough... but it will do for now. Quality is great.
by: Bethany05/31/2016
We ordered a hitch and wiring harness. i had messed up my first ordered and called the phone number on my confirmation and was able to speak with someone and get help with canceling that order and making the correct one! We received the shipment in just a few days and everything was great! We are now able to tow our trailer with our new hitch on our jeep!
by: Barry07/25/2018
After selling my truck and purchasing one without a trailer hitch I placed my order for my new Curt trailer hitch. Shortly after I received and email from George J. at etrailer.com. The email stated that my order was being packaged and would be sent out in the next seven days. Living in the northeast we have a very short boating season and seven days to put the order together and 7 to 10 days to ship was not going to work for me, as I would be without a boat most of August. I replied to the email to ask about expediting the shipping. I got a reply email almost immediately from Troy H. who informed me that Etrailer was waiting on another part of my order to come in from the manufacturer. Troy said that he could get the trailer hitch and wiring harness out immediately if i didn't mind waiting a little longer for the roof racks. I didnt mind waiting for the roof racks so Troy had my hitch and harness sent out. Five days later it was sitting on my front porch. Thank you to George J. and Troy H. for the great customer service.
25
235
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Must Wire be Run to Battery to Install Curt Trailer Wiring Harness in 2014 Jeep Cherokee SportIf you install the Curt Wiring Harness # C56208 and don't connect the power wire to the Jeep's battery it won't damage anything but the trailer's lights aren't going to work. The harness is powered by the battery instead of drawing power off of the tail light circuit. If it isn't getting power from the battery there's not power to operate the harness.
view full answer... - Can 12V Power Supply for Taillight Converter Be Obtained from Outlet in Cargo Area of VehicleCurt recommends getting that power directly from the positive battery terminal. One of the primary purposes of drawing the power for the taillights directly from the battery is to isolate the wiring system of the vehicle from the trailer wiring. This way, the vehicle wiring will be protected from any short circuits that might occur in the trailer wiring. I can't recommend you install the Curt # C56208 in any other manner than what the manufacturer recommends. You can see installation...
view full answer... - Hitch and 7-Way Recommendation for a 2015 Jeep CherokeeFor a hitch for your 2015 Jeep Cherokee you would want the Curt Hitch part # C13172. This hitch has been confirmed as a fit for your vehicle and it has a hidden crosstube which will mean that it will be largely out of plain sight. I attached an install video for you to check out as well. For trailer wiring you would need to start with a 4-way like the part # C56208. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a...
view full answer... - Hitch and Trailer Wiring Recommendation for a 2015 Jeep CherokeeFirst you will need to start with a trailer hitch for your 2015 Jeep Cherokee Sport. For that the Curt Hitch part # C13172 is our most popular option that would work great for you. I attached an install video for you to check out as well. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch...
view full answer... - Wiring The Curt T-Connector Wiring Harness on A 2015 Jeep Grand CherokeeCurt has designed the T-Connector Wiring Harness, # C56208, to work with the existing wiring of your 2015 Jeep Grand Cherokee. The 12 volt battery connection is designed to work with the unit to maximize performance and limit the strain on your vehicle's electrical system. The 12 volt accessory circuit on some vehicles may not have a dedicated circuit and can not take the electrical load of both the trailer wiring harness and the 12 volt accessory plug. The result of this could cause overheating...
view full answer... - Recommended Hitch to fit a 2014 Jeep Cherokee LimitedYes, the etrailer Hitch part # e73ZR that you referenced will work on your 2014 Jeep Cherokee Limited as this hitch will fit all model 2014 Cherokees that are not Trailhawks or Latitude. You might also be interested in the following parts to complete you towing setup: etrailer Ball Mounts Kit part # 989900 Curt Trailer Wiring Harness part # C56208
view full answer... - Curt Vehicle Wiring Harness Not Powering Trailer Running Lights On 2017 Jeep CherokeeIt sounds like you may have a short somewhere on your running light circuit which could be an internal short in the converter box of your Curt # C56208 or a wire on your trailer that is has a bare spot and is touching a ground. Since you mentioned that the harness was working before, I would test your converter box. To do this you will need a circuit tester like # PTW2993 and check if there is power coming into the brown wire of your converter box with your vehicle's lights on, and check...
view full answer... - Which Vehicle Wiring Harness For Towing Trailer With A 2018 Jeep CherokeeThe Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56208 is the correct harness for your 2018 Jeep Cherokee. The Curt T-Connector Vehicle Wiring Harness # C56208 allows for your Jeep to power the lights on the trailer that you plan on towing, and makes for a simple plug and play installation. I attached the installation video on a 2018 Jeep Cherokee like yours for you to take a look at. Once installed I recommend adding Dielectric Grease # 11755 to the connector...
view full answer... - Hitch Recommendation for a 2015 Jeep CherokeeThe Curt Hitch part # C13172 that you referenced has been confirmed to fit the 2015 Jeep Cherokee Trailhawk and non-Trailhawk models so it would work well for you. I attached an install video for you to check out as well. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin...
view full answer... - Most Cost Effective Trailer Hitch and Wiring for a 2016 Jeep Cherokee LatitudeThe least expensive trailer hitch option for your 2016 Jeep Latitude is the Curt Trailer Hitch Receiver Class III - 2" # C13172. It is a solid choice as well. I have attached our Best 2016 Jeep Cherokee Trailer Hitch Video where this part is reviewed. The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56208 is your most economical wiring harness option. I attached an installation video. If you plan on doing some towing, I recommend the cost effective Convert-a-Ball...
view full answer... - Trailer Running Lights Not Working when Connected to 2015 Jeep Cherokee TrailhawkI have talked to my co-workers and it does appear to be a very common issue for 2015 Jeep Cherokee Trailhawks. From what we have found that if you go to the dealership they can re-flash the computer to get it to work again. We are not sure why the computer keeps losing the data, but that might be part of the issue. Since this has been an ongoing issue, you could try to contact the service center to see what they can do for you. Another option for you would be to install a completely different...
view full answer... - Visual Appearance of Available 2-Inch Class III Trailer Hitches for 2014 Jeep Cherokee LatitudeWe offer four Class III trailer hitches for your 2014 Jeep Cherokee Latitude and these can be seen on the link provided. Between the two Curt hitches you referenced, parts # C13171 and # C13172, the one with the more discrete appearance when installed is the C13172. If you refer to the linked installation video you can see exactly how the hitch will look once installed. This is the most popular hitch choice for owners of the 2014 Cherokee and it is also the most cost-effective option. This...
view full answer... - Trailer Hitch and Related Towing Items Needed for 2014 Jeep Cherokee LaredoThe Curt Class III Hitch # C13172 that you referenced fits all versions of the Jeep Cherokee, including your Laredo. The correct ball mount to use with this hitch is part # C45030. You can secure the ball mount to your hitch either with a simple pin and clip # C21500 or with a locking pin # e98880. If you need a 2-inch hitch ball to match your trailer's coupler you can use # 63845. You'll also need a wiring harness for your trailer's lights. You can use Curt harness # C56208. I have linked...
view full answer... - Does Curt Trailer Wiring Harness part # C56208 Fit 2016 Jeep CherokeeThe Curt trailer wiring harness part # C56208 that you referenced is a confirmed fit for your 2016 Jeep Cherokee Trailhawk and would not cause any computer errors. I attached an install video for you to check out as well. This harness installs by plugging inline to the taillight harnesses and using the voltage there as signal wires and then draws the power from the battery wire of vehicle. It bypasses all computer related circuits.
view full answer... - Trailer Hitch and Wiring Recommendation for 2015 Jeep CherokeeFor your 2015 Jeep Cherokee the Curt hitch part # C13172 is a confirmed fit and would be an excellent option. This hitch has a concealed cross tube which gives the rear of your vehicle a much cleaner look. For trailer wiring you then would want the part # C56208 which is a confirmed fit as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise...
view full answer...
- Trailer Hitch Recommendation for 2016 Jeep Cherokee SportThe Curt hitch part # C13172 that you referenced is a confirmed fit for your 2016 Jeep Cherokee Sport and would be what we recommend. This is our most popular option for your vehicle because it has a high towing capacity, is made in the USA, and has a concealed crosstube. Check out the install video I attached for more info as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch...
view full answer... - What Gear Should 2017 Jeep Cherokee be in When Towing TrailerI believe you are asking what gear should the transmission of your 2017 Jeep Cherokee be in when towing. You'd be fine to just leave the transmission in drive. For a hitch you'd want the part # C13172 which is a confirmed fit is the best looking option since only the hitch opening is visible. For trailer wiring you'd then want the Curt # C56208 which is a confirmed fit as well. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with...
view full answer... - Can a Brake Controller Be Added To a 2016 Jeep CherokeeI have everything that you need to install a 7-way trailer connector and brake controller on your 2016 Jeep Cherokee Sport. This will require three different parts but it is completely doable and rather easy following the steps below. The first thing you are going to want to start with is a 4-way trailer connector, the Curt T-Connector Vehicle Wiring Harness part # C56208 which is plug and play so this will be easy and we even have an install video. Once we have this installed we can then...
view full answer... - Hitch Recommendation for a 2015 Jeep Cherokee TrailhawkThe Curt Hitch part # C13172 that you referenced has been confirmed as a fit for your 2015 Jeep Cherokee Trailhawk so it would work well for you. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not include a ball...
view full answer... - What Is Needed For Installation Of P2 Brake Controller On 2014 Jeep CherokeeGreat choice for a brake controller if you have electric brakes on your trailer. The Tekonsha P2 Brake Controller, part # 90885 is our most popular because it is easy to install and use. If there is no connector at the rear of your Cherokee, I recommend part # C56208. This will give you a 4-way connector at the rear of your vehicle. This is a T-connector and plugs directly to the vehicle wiring. You will then need part # ETBC7. This will use the 4-way connector and with the additional...
view full answer... - Trailer Hitch Recommendation for 2016 Jeep Cherokee LatitudeThere are a few custom fit trailer hitches available for your 2016 Jeep Cherokee Latitude 4x4. I recommend the Curt Class III # C13171 because the installation process is a bit easier as you do not need to lower the exhaust or trim the fascia on your vehicle like you do with the other models. This is a 2 inch hitch with a 5,000 pound towing and 750 pound tongue weight capacity, although you will want to check your vehicle owner's manual to see what you can safely pull. This is confirmed...
view full answer... - Towing Capacity of 2015 Jeep Cherokee LimitedWhen towing, you're always going to be limited by the lowest rated component in your towing setup. You'll want to consult your owner's manual and your Jeep dealer, but it looks like from my research that your 2015 Jeep Cherokee Limited without the factory towing package has a towing capacity of 2000-lbs. I would be worried that your horse trailer is going to weight that much unloaded, so it will be considerably more once you start loading horses and cargo inside it. As for a hitch, the...
view full answer... - Trailer Hitch and Wiring Recommendation for 2016 Jeep Cherokee Sport If your trailer towing capacity is 2,000 lbs then towing a 1,700 lb trailer wouldn't be an issue at all. You'd need a hitch installed on your 2016 Jeep Cherokee Sport too. For that the Curt # C13172 is a confirmed fit that would work well. For trailer wiring you'd then want the # C56208 which is a confirmed custom fit kit for your vehicle. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise...
view full answer... - Recommended Trailer Hitch and Wiring Harness for 2018 Jeep Cherokee Latitude PlusThe trailer hitch that I recommend for a 2018 Jeep Cherokee Latitude Plus is the etrailer Trailer Hitch Receiver part # e62TR. The etrailer hitch has a bolt-on install so you can do it yourself without worrying about modifying the vehicle, comes with a 2" receiver which provides you with the widest variety of hitch mounted accessories to choose from, and it has a hidden cross tube design which will provide the best overall aesthetics. In order to complete your towing setup you'll also need...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Randy B
Test Fit:
Ryan G
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video by:
Andrew K
Video by:
Joshua S
Video by:
Kathleen M
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Written by:
Laura H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Richg
10/1/2018
Nice of you guys to follow up. I was glad to write the review since I was well satisfied with the product and process. The hitch and harness have performed flawlessly. Your company will always be my first stop for anything tow related.