Can 12V Power Supply for Taillight Converter Be Obtained from Outlet in Cargo Area of Vehicle
Question:
Hi- Im getting ready to install your wiring harness CURT #56208 on my 2016 Jeep Cherokee, Im hoping I can tap into the hot wire that feeds the rear drivers side accessory outlet near the rear hatch, rather than running the wire all the way to the engine compartment as they suggest... is this possible/acceptable? If not, Id sure like to know why! :- thanks guys.
asked by: Marty P
Expert Reply:
Curt recommends getting that power directly from the positive battery terminal.
One of the primary purposes of drawing the power for the taillights directly from the battery is to isolate the wiring system of the vehicle from the trailer wiring. This way, the vehicle wiring will be protected from any short circuits that might occur in the trailer wiring.
I can't recommend you install the Curt # C56208 in any other manner than what the manufacturer recommends. You can see installation instructions and an install video by clicking the provided links.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Trailer Wiring
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Video: Trailer Wiring Harness Installation - 2016 Jeep Cherokee C56208
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56208 Review
- Q&A: Can Power Wire for Trailer Wiring on 2014 Jeep Cherokee Latitude be Ran Through Interior
- Q&A: Trailer Running Lights Not Working when Connected to 2015 Jeep Cherokee Trailhawk
- Q&A: Adding a 4- and 7-Way Trailer Connector to a 2017 Jeep Cherokee Trailhawk
- Q&A: Does Curt Trailer Wiring Harness part # C56208 Fit 2016 Jeep Cherokee
- Search Results: 4 flat wire harness
- Video: Malone Anti-Rattle HitchLock System Review
- Video: Roadmaster Tow Bar Wiring - Bypasses Vehicle Wiring - RM-2120 Review
- Video: Optronics LED Identification Light Bar Installation
- Video: Softride Locking Anti-Rattle Threaded Hitch Pin Review
- Video: Roadmaster Standard Magnetic Tow Lights Review
- Shop: Heavy Duty Magnetic Tow Lights - 20' Wiring Harness with 4-Way Flat Trailer Connector
- Shop: LED Identification Light Bar for Trailers over 80" Wide - Submersible - 9 Diodes - Red Lens
- Shop: Anti-Rattle Hitch Pin for 2" Trailer Hitches
- Shop: Pro Series Anti-Rattle Device for 2" x 2" Trailer Hitch Receivers
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: Correct Trailer Wiring Harness for a 2016 Jeep Cherokee Sport
- Shop: Vehicle Tow Bar Wiring
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
on Custom Fit Vehicle Wiring
