2015 Jeep Cherokee Vehicle Tow Bar Wiring

Features:

This kit provides your trailer or towed vehicle with the required lighting for towing. Durable rubber-coated housing and polycarbonate lens. Magnetic bases won't scratch your vehicle. Includes wiring harness, hardware, and carrying case.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

Wire your vehicle and get the signal lights required for flat towing without having to splice into your wiring with this custom, plug-in harness. Integrated diodes prevent feedback from RV for safe operation.

Installation Notes:

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

Diode kit allows you to use your vehicle's tail lights and wiring system while preventing feedback from your RV. Wires 2-wire and 3-wire systems to operate as a combined lighting systems. Includes 7-wire to 6-wire Flexo-Coil electrical cord.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

This wiring kit carries your RV's brake and turn signals to your towed car's tail lights. Diodes prevent damage from electrical feedback. Connects RV and towed car with 4-pole flat plugs. Includes installation hardware.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

Perfect for tow bars with built-in channels, this complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

This complete kit includes everything you need to correctly display your RV's brake and turn signals on your vehicle tail lights. Includes coiled 7-way to 6-way cable and 6-way car-side socket.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

Weatherproof LED tow bar light provides stop, tail, side marker, and turn functions for your towed trailer or vehicle. Wireless design eliminates cords for hands-free control. Magnetic base provides secure grip. Rechargeable battery.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

Connect your towed car's lighting system to your RV to activate the signal lights required for towing. This universal harness wires in to your vehicle's existing wiring with the included connectors.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

Diode kit allows you to use your vehicle's tail lights and wiring system while preventing feedback from your RV. Wires 2-wire and 3-wire systems to operate as a combined lighting systems. Includes 7-wire to 4-wire Flexo-Coil electrical cord.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

Removable LED lights provide signal lights for your towed car without you having to tap into the car's wiring or run wires under the car. Wireless transmitter plugs into your RV's 4-way connector and sends a signal to the magnetic lights.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

Get lights for towing your vehicle without splicing into its wiring. Magnetic light kit provides a pair of stop, turn, and tail lights. Mounts using large, heavy-duty magnets for increased stability. Plugs in at rear of your motor home.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

Great for either your trailer or towed vehicle, these magnetic lights ensure that you have emergency flashers and the signal lights required for towing without having to tap into existing wiring. Long-lasting LEDs offer superior operation.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

(2) 4" Diameter magnetic LED tow lights provide stop, tail, and turn signals for your towed car without splicing into its wiring. Heavy-duty magnetic bases provide a secure hold. 20-Ft harness with 4-Flat plug connects to RV.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

Great for either your trailer or towed vehicle, these magnetic, 2-sided lights ensure that you have emergency flashers and the signal lights required for towing without having to tap into existing wiring. Long-lasting LEDs offer superior operation.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

Weatherproof LED tow bar light provides stop, tail, side marker, and turn functions for your towed trailer or vehicle. Wireless design eliminates cords for hands-free control. Magnetic base provides secure grip. Rechargeable battery.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

Features:

Get turn signals and brake lights on your towed vehicle without tapping into the wiring. Light bar plugs into the 12-volt port in your car, with a wireless transmitter that plugs into your 7-way. Keeps you safe and legal while flat or dolly towing.

Installation Notes:

You will need to install a Charge Line Kit; sold separately

Some models of this vehicle may use Mortorq® fasteners. If your vehicle has these types of fasteners, you will need a PFMTS2E bit to remove them which can be ordered through a Snap-On dealer.

Tech Tip:

Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.