To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your Chevrolet Express Van with this custom harness. Connector plugs directly into OEM tow package port - no cutting, splicing or tapping required.
Features:
Specs:
Installation
This custom-fit T-connector plugs into your vehicle's factory tow package wiring harness, which is located behind the passenger's-side access panel in your rear cargo area.
Once installation is complete, the 4-way connector will be stowed within the jack storage compartment of your cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plug on your automobile and the 4-pole connector itself - to help prevent corrosion.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Curt t-connector vehicle wiring harness with the four-way flat trailer connector for the factory tow packages. This is a custom-fit part, it is designed to fit the 1996-2003 Chevrolet Express vehicles and GMC Savannah vehicles. On a custom-fit part I always like to recommend to go to our website, use our fit guide, put in your year and model vehicle and it will show you if this will work for you application. This harness will provide a four-way flat trailer connector at the back of your vehicle to power your trailer signal lights. This particular harness is designed for vehicles with the factory tow package. This does connect very quickly and easily; there's no cutting or splicing or wires. Basically you locate the connection point that's in the rear cargo area, plug that it, ground your white wire, run the four-way out the back and you're all ready to go. It also comes with this nice dust cap that you can pop onto the four-way just like this over the plug itself.
You can leave it on there if you like, and then when you're not plugged into your trailer just put that dust cover over the terminals, it protects the terminals from any damage or from the elements themselves. A few specs on this: the maximum amperage on the stop and turn light circuits is three amps per circuit, for the tail lights it's five amps total. It does come with everything shown here, it has a nice set of detailed instructions that describe how to install it and even gives you pictures of you connection points. Comes with some cable ties that take up any slack in the wiring, and it comes with a ground screw. Basically, when you go to install this it's very simple basically what you do is go to the rear cargo area of the vehicle and you locate your factory tow harness connector, which is usually behind the jack storage cover on the vehicle. Once you find that you'll just take the cap off and plug this into that connector. You have this white wire with the outlet on it, you want to connect this to a good, clean ground, so they do include a grounding screw.
Drill a hole, make a good clean ground. Once those are all connected, just run this length of wire out the back and then take your cover off and you'll have it plug into your trailer and it will supply the lights on your trailer. That should do it for the review of the Curt t-connector vehicle wiring harness with the four-way flat trailer connector for the factory tow packages.
Average Customer Rating: 4.7 out of 5 stars (24 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into OEM tow package port - no cutting, splicing or tapping required.C55240 Express van wiring harness and 113040 class III hitch took only 15 minutes to install. Great products!!!
I needed to rent a utility trailer to move some furniture. None of the local auto parts stores had a easy quick connector for trailers. I contacted this company and they had an exact fit connector. I simply snapped it in and I was ready to go. Plus, they shipped it real fast.
I love it, it plugged right in to the plug behind the brake light wiring Work great.
The Curt Electrical Harness is great, snapped right into the Van connection; however, the Hopkins 48595 mounting bracket that I ordered for the Curt 4-way connection doesn't work, it isn't made to be compatable with the Curt connector, so the Hopkins 48595 mounting bracket was a waste of money. Maybe I overlooked any compatibility notes, if not, you should have compatibility notes, something like Hopkins mounting bracket not compatable with Curt 4 way connector.
Exactly what I needed. Plugged right into the original1998 Conversion Van factory install wiring. (I was afraid the wiring might not work after all these years) Tested and wow trailer lights work. Saved me a bundle, Chevrolet dealer wanted $150 to install wiring harness. I do not have the convenience of wiring being hidden under the van permanently, however I can live with pulling through the back doors when required, because I will only pull trailer occasionally with this vehicle.
Thanks for the fast service.
PERFECT FIT, installation was easy, just had to drill one small hole for the ground and used the supplied self tapping screw. Even came with a dust cover! Great value for the price. Shipped quick to! Installed on a 2000 Chevy Conversion van. Thanks Etrailer!
Plugged right into my factory wiring harness for my factory trailer light assembly thank you so much made installation very easy
As soon as I installed the Curt T-Connector my Chevy Express instantly became a chick magnet! Also e trailer has excellent customer service
The product was exactly as described. It plugged into the oem wiring harness and was ready to use. The shipping was very fast.
I received my hitch and the wiring on time and all worked out great!
Thanks
great,just great.etrailer.com was easy to order from.shipment came faster than was told.fit like a glove.thanks.save alot of money and time.
I ordered a hard to find wiring adaptor go an old 99 Chevy, etrailer had the part in stock and shipped the samre day. The service was excellent.
It worked fine
Good Product, Plugged rite in and works excellent, highly recommended !
The wiring did not fit my truck as I was told it would
Super easy install. Works great. Great price! Fast shipping!
It was very easy to select what I needed and place order.
Arrived early and just as promised. Great price, company, and product. Thanks
Arrived extremely fast. Part fit perfectly. Highly recommend.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bill S.
8/4/2016
Working just great. I like the harness and especially the service that you provided.