Brophy Slide In Camper Tie-Downs - Extra Clearance - No Drill Bed Mount - Qty 4
(147 reviews)
Price: $274.60
In Stock
Brophy Slide In Camper Tie-Downs - Extra Clearance - No Drill Bed Mount - Qty 4
Item # HSAB
Our Price: $274.60
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (147)
- Q & A (0)
- Photos
- Used (2)
Brophy Camper Tie-Downs - HSAB
- Front and Rear Tie-Downs
- Brophy
- Bed-Mounted
- Powder Coated Steel
The angled design of these tie-downs gives you extra clearance for attaching your turnbuckles, making them easy to use. Powder coated steel brackets clamp onto the side rails of your full-size pickup with no drilling required.
Features:
- Creates attachment points for securing your camper to your truck bed
- Wide clamps provide superior holding strength
- Makes it easier to attach your turnbuckles (sold separately)
- Angled bracket provides more clearance between tie-downs and truck fenders than standard tie-downs
- Protects your truck's paint with neoprene pads attached to the brackets
- Resists corrosion and rust with black powder-coated steel
- Clamps securely onto your bed rails - no drilling required
- Includes 4 camper tie-downs with clamp plates, 12 neoprene pads, and installation hardware
- Made in the USA
Specs:
- Application: for exact fits, enter in your vehicle's year/make/model above
- Minimum 2" needed between sidewall and lip of bed rail
- Not compatible with drop-in bed liners, aftermarket bed rails, double-walled beds, or side-step beds
- Dimensions: see diagrams below
- 1-Year limited warranty
Angled Bracket Makes for Easy Hookup
These particular tie-downs are designed with an angled bracket that gives you more clearance between the tie-down anchor points and your truck's fenders. This extra space makes it much easier to attach and tighten your turnbuckles (sold separately) when you're securing your camper.
No-Drill Installation
These clamp-on tie-downs install quickly and easily, with no drilling or modification to your truck required. Because they're mounted in the bed instead of on the frame or body of your truck, you don't need any kind of fancy mechanical background to get this job done. You just need to slide the hold downs over the rails of your truck and clamp them down with T-bars and hex bolts.
The fact that they simply clamp on means that you can remove these tie-downs when you're not hauling your camper, leaving no trace. Use the provided neoprene pads on the T-bolts and tie-downs where they will make contact with your truck to make sure no scratches or dents will be left behind either.
It's important that the tie-downs on your truck line up with the anchors on your camper at the correct angle to ensure a secure hold. Ideally the tie-downs should be on the outside of your camper's anchor points, but they can be on the inside as well, just as long as they're not lined up with each other.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches the anchors on your camper to the tie-downs on your truck to keep your camper safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
HSAB CR Brophy Heavy-Duty Tie Downs for Slide In Truck Camper - Black Powder Coated Steel - Camper Hold Down - Angled Design - 4 Pack
Installation Details
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Brophy Slide In Camper Tie-Downs - Extra Clearance - No Drill Bed Mount - Qty 4 - HSAB
Average Customer Rating: 4.4 out of 5 stars (147 Customer Reviews)
The angled design of these tie-downs gives you extra clearance for attaching your turnbuckles, making them easy to use. Powder coated steel brackets clamp onto the side rails of your full-size pickup with no drilling required.by: Leo04/03/2024
The Brophy tie-downs work just as advertised. I am a recreational user of my camper - not full-time or long trips, and have had no issues with them. The only challenge is backing my truck under the camper with the brackets mounted - like threading a needle, because the leg stands barely clear the brackets. I have a 2-16 F-250 and a Northstar 650 and their is not enough clearance in the bed to add the brackets after the camper is in position. Again, this is not a problem with the brackets, its a camper leg/stand and bed width issue.
by: Steve03/22/2024
Easy to put on they work perfectly very solid I have a 20-22 palomino SS 1251 truck camper Badland Edition doing a great job thank you a bunch
by: Mickey 05/10/2024
Kimberly was friendly, knowledgeable and really helped me pick out the right tie down. Would have no problem ordering from her agai.
by: Jeff R06/27/2014
I am so happy with your Angled Hold Downs. Especially how they clamp to the bed of my truck and I didn't have to drill any holes. They do a great job and I have no worries when the girls take it camping for the weekend... I do worry about the safety of my pickup though. hahaha
by: Teri04/04/2018
As always my order arrived early. The box was not in great shape but nothing was lost out the holes. Poor delivery guy could barely get it to the porch. I was surprised at how heavy they are. It took me about half an hour to get them installed. I have a 1995 Dodge Ram 2500. The shape of the inside of the truck was a pain to work around. I couldn't set the front tie downs as far forward as I would have liked, but it will work. Haven't got the camper yet but I'm sure they will be perfect. I have seen these on many pickups here in western Colorado. The installation video made my choice easy ...NO HOLES TO DRILL.
by: James07/09/2023
After installing the tie downs per the instructions I proceeded to connect a turnbuckle with chains and upon tightening it down the Brophy tie downs turned towards the camper connection point. In other words they would not tighten up.
Jenny N.
7/12/2023
I wanted to ask if you can send a picture of how the tie downs are installed. I want to help to make sure that you can use the tie downs.
by: Ty05/09/2024
Works great with the bike rack. Looks nice, easy installation. I'm glad I bought it. I would recommend.
by: Matthew06/20/2023
Items in the box were not secure and clearly banged around during shipping. Box was torn in a number of places and resulted losing the T-bolts. I discovered Friday evening, and called etrailer the next morning. Person indicated you don't ship on Saturday but would go out Monday morning and she'd mark it priority. She indicated I could expect delivery on Tuesday or Wednesday. I received notice of the delivery on Friday as I was on the way to Canada fishing for a week. Needless to say I got creative and used pieces of 2x2 instead to leverage brackets to truck bed side. When I got home I looked at the T-bolts and think I will stick with the wood. There is no coating on the T-bolts so would likely damage the bed lining.
by: Devin05/24/2023
1) Poor quality product: The nuts for the bed clamp can't even be tightened all the way due to poor design, friction with the body of the clamp.
2) The neoprene pads referenced in the instructions weren't included in my package.
3) Fast shipping time and good communication from eTrailer
Jenny N.
5/26/2023
I know that these tie downs are considered to be more universal. The external bed rail cannot be more than 5.5 inches wide and there needs to be at least 2 inches of space under the lips of the rail. Would you be able to send a picture of how yours is installed? Just be sure that you do not have a double- wall or step side bed. I will have Customer Service reach out to you about the missing neoprene pads. We will have them sent out.
by: Jeremy03/23/2023
The product itself will do the job, after I spend some precious time to clean it up. I was amazed that all the individual parts and hardware made it, since the box was totally destroyed. All of the powder coating of the plates are badly scratched, down to raw metal, just from banging and sliding against each other. A couple corners of the thinner metal flanges are bent, too.
This package looked like it was drop-kicked down a flight of cement stairs in a fit of rage.
Unfortunately, I need this to work ASAP, and will repair and modify to suit my needs. Never mind how I feel, or the principal of the matter, but I feel some refund or discount is in order.
I’m sure it left Brophy’s manufacturing facility looking shiny and straight.
I’m sure they could improve their packaging.
I’m certainly sure that etrailer could indentify this obvious issue and take some steps of their own to maintain a happy clientele, like simply throwing it into another heavy box.
Jenny N.
3/24/2023
It certainly sounds like the tie downs did have a rough ride in shipping. Customer Service will reach out to you.
by: Walt 07/26/2023
Your service was great. The products I ordered arrived ahead of schedule. Also the tie downs look to be of great quality--very heavy, I can't wait to try them this weekend. The shipping box took a real beating. The packaging tape worked well at holding the box together. The only suggestion I have is that you might consider using a stronger cardboard box or reinforcing it somehow to withstand the handling of your products while being shipped.
by: Excellent 05/02/2019
These tie downs worked great for my Toyota Tundra. I was securing a light weight camper.
by: Loretta 08/02/2023
the clamp ons didn't allow for the plastic cover over the truck bed rails to remain in place on the 2022 Nissan Frontier KC with 6' 1" box.
by: H edward05/15/2016
I have a Sunlight, 8 foot, slide-in truck camper that I now carry in a 2015 Dodge 1500 Quad Cab. I use the Brophy angled tie downs for the front of the camper and Happijac bumper tie down for the rear. It took some tweeking and the right combination of hardware to connect the Brophy tie down to the camper but in the end it all came together and I'm very happy with the results. They are relatively easy to install and make a solid, safe tie down system. I would recommend them to a friend.
by: Paul V.05/06/2020
Product was easy to install, worked great. It held on some pretty knarly roads.
etrailer is a great company to work with as well.
by: Bob T.08/30/2013
I installed the angled camper hold-downs today and it took me all of fifteen minutes. I was impressed at how heavy-duty they are. I am very pleased with the product.
Bob T.
8/30/2014
Well, its been a year since I installed the hold-downs on my truck and I am still very satisfied with them. They have been in use several times and in fact I am leaving next week on a two week hunting trip to Colorado.
by: Wade02/03/2018
Really impressed with the product and installation was really simple good quality product I would recommend it to anyone
by: Andrew 05/10/2023
The ease of installation and the robust product makes this a great go to for truck camping.
by: Gerry06/28/2020
Excellent product - super fast shipping - perfect fit for my 2019 Ram Turbo diesel 3/4 ton 4x4. Plenty of clearance.
by: Michael11/14/2023
The service was great and the staff was more than willing to help with any issues the only reason I gave it four stars was that the website was misleading
by: Erik 12/05/2023
Everything was correct to my order standard delivery was very fast
by: Gene03/17/2023
Good quality but to wide off bed doesn’t clear camper jacks
by: Les 11/17/2023
Awesome quick shipping. Thanks now I can pick up my camper this weekend
by: Tim mangni09/11/2019
Amazing service and fast shipping. We called looking for the best item to secure our camper to
Our pickup. They knew what would work best and we had it the next day.
25
147
Show More Reviews
See what our Experts say about this Brophy Camper Tie-Downs
- Will the Brophy Clamp On Camper Tie-Downs Fit a 2020 Toyota TundraThe Brophy Clamp On Camper Tie-Downs part # HSAB are universal tie-downs used to secure a truck bed camper to a truck bed. They are universal because the manufacturer does not do any testing on specific year, make, and models. That said, we have heard back from customers using these tie-downs on earlier model Toyota Tundras so they should work on the 2020 as well. In order to complete your setup you will also need the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs part # TDHP.
view full answer... - Will the Brophy Clamp On Camper Tie-Downs Fit a 2016 Ford F-250The Brophy Clamp On Camper Tie-Downs part # HSAB are a fit for a 2016 Ford F-250 so long as you have a SRW model. If you have a DRW model then you'll need to use a set of frame mounted camper tie-downs from the list attached for you which is based on bed size, cab type, etc. Please note, in order to use the Brophy Clamp On Camper Tie-Downs you'll need the Brophy Basic Turnbuckles part # TDHP.
view full answer... - Difference Between The Brophy Camper Tie-Downs HSAB And HSSF The Brophy # HSAB and # HSSF are essentially the same thing with the exception that the # HSAB has a small bend in it to make connecting to your turnbuckles easier. If you're still needing turnbuckles you can use part # TDHP.
view full answer... - How to Tell if Brophy Camper Tie-Downs Will Fit a 2001 Dodge Ram 3500 DuallyThe Brophy Slide In Camper Tie-Downs # HSAB are a universal application, and while I believe the rear part of your 2001 Dodge Ram 3500 dually will be too wide for them to fit, I'm attaching a photo of the dimensions so you can confirm this on your end. If these won't fit your truck then I recommend using the HappiJac Camper Tie-Downs # LC182910-182971 instead because they are still more on the cost-effective side of things when compared to the TorkLift alternatives.
view full answer...
- Recommended Camper Tie-Downs For A 2016 GMC 2500HDFor your 2016 GMC Sierra 6-1/2 Foot Bed - Crew Cab - with board or step underneath truck bed and with a factory installed hitch the 2500 Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item # HSAB with the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000lbs - Qty 4 Item # TDHP is your best option. It has a simple clamp on design that requires no drilling. There are some requirements with these tie-downs: external bed rail width cannot...
view full answer... - Will Brophy Camper Tie Downs Fit a 2004 Dodge Ram 3500 DuallyThere are some exclusions for the Brophy camper tie downs # HSAB: Some dually trucks and most mid-size or import pickup trucks Pickups with drop-in bed liners, plastic bed rails, side-step beds, and double-wall beds 2003 Dodge 3/4-ton and 1/2-ton 1500 extra cab 4-door 2WD short box 2002 Dodge 1500 4-door short box 2002 Dodge 1500 quad cab 2004-2008 Ford F-150 But the list does not exclude your 2004 Dodge Ram 3500 dually. If the dually bed is not completely metal or if the walls are double-walled...
view full answer... - Recommended Camper Tie Downs for 2014 Ford F-250 With Double Walled Stake PocketI have a solution for you, but you won't be able to use stake pocket mounted tie downs on the 2014 Ford F-250 or F-350 because of the double walled stake pockets. However, you can use clamp on tie downs like the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSAB, since they don't use the stake pockets at all. I've linked a review video of these for you to check out, but if you wanted to go this route instead of frame mounted they would be the only option.
view full answer... - Recommended Clamp On Bed Mounted Camper Tie Downs for a 2001 Dodge Ram PickupFor a set of clamp on camper tie downs that have been confirmed to fit your 2001 Dodge Ram Pickup I recommend using the Brophy Clamp On Camper Tie-Downs part # HSAB. I have attached a photo for you on a truck from the same generation to show fit. The Brophy Clamp On Camper Tie-Downs part # HSSF should also fit but we have not yet tested this. It looks like you may need the angled lip to clear the bed sides so I do recommend using part # HSAB. The angled lip is the only difference between...
view full answer...
- How to Determine How Far the Camper Tie Downs HSAB Extend Past Bed RailThe width at the widest point on the Brophy Anchors part # HSAB is 6 inches. Installation of the hold-downs requires a minimum of 2" of clearance between the inside of the truck's sidewall and the inner lip of the sidewall. You will also need hardware package # TDHP.
view full answer...
- Brophy Clamp On Camper Tie-Down Placement The Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item # HSAB mount to the bed rail instead so you won't have any space issues with the running boards of your truck.
view full answer... - Will Brophy Camper Tie Downs HSAB Fit 1996 Dodge Ram 2500Yes the Brophy Camper Tie Downs part # HSAB are a fit for your 1996 Dodge Ram 2500 and would work well with your 11 foot camper. For turnbuckles to attach these to your camper you'd then just want the part # TDHP and you'd be set.
view full answer... - Will Brophy Camper Tie Downs Fit 2004 Ram 2500There are some exclusions for the Brophy camper tie downs # HSAB: Some dually trucks and most mid-size or import pickup trucks Pickups with drop-in bed liners, plastic bed rails, side-step beds, and double-wall beds 2003 Dodge 3/4-ton and 1/2-ton 1500 extra cab 4-door 2WD short box 2002 Dodge 1500 4-door short box 2002 Dodge 1500 quad cab 2004-2008 Ford F-150 But the list does not exclude your 2004 Dodge Ram 2500. If the dually bed is not completely metal or if the walls are double-walled...
view full answer... - Are the Brophy Clamp On Camper Tie-Downs Available in a Set of 2The Brophy Clamp On Camper Tie-Downs # HSAB are only available as a set of 4 (front and rear) tie-downs.
view full answer... - Will Brophy Slide In Camper Tie-Downs Fit 2024 Ram 2500The # HSWB is designed to fit Ford trucks. For your 2024 Ram 2500 you either need the # HSAB, # HSBP or # HSSF. All of these will fit the 6-1/2' bed and 8' bed with crew cab. The # HSAB is the only one compatible with the RamBox.
view full answer... - Camper Tie Downs for a 2018 Ram 2500We have Brophy Stake Pocket Mounted Camper Tie Downs # TDSF but they are only for certain trucks up to the 2010 model year. You may be able to use Brophy Clamp On Camper Tie-Downs # HSAB though. They will fit if the external bed rail width is less than 5-1/2 inches and they require 2 inches of space beneath the lip of the bed rail. Use these with turnbuckle kit # TDHP. The other option is custom frame mounted tie downs. Which ones will fit depends on the configuration of the truck. I have...
view full answer... - Camper Tie Downs For 2021 Ram 3500 w/ Running Boards & Factory Towing PackageThis Clamp On Camper Tie Down # HSAB will work for your 2021 Ram 3500 with running boards and factory tow package. It will fit for both a 6-1/2 bed and 8 foot bed. Same with these TorkLift tie downs # TLD2140 and # TLD3112 I've included a video for you to learn more about them!
view full answer... - Camper Tie-Downs for 2015 Ram 3500The Brophy Angled Hold-Downs # HSAB, Camper Hold Down # HSSF, and the Camper Hold Down Zinc Finish # HSBP will all fit your 2015 Ram 3500. The types of truck beds these will not fit include step-side beds, some double-wall beds, some dually beds, most mid-size or import trucks, beds with drop-in bed liners, and plastic bed rails. The Brophy Angled Hold-Downs # HSAB have neoprene pads to protect your truck's paint. They also provide more clearance between the hold-downs and the outside...
view full answer... - Truck Bed Camper Tie Down Recommendation for 2017 Dodge Ram 2500The stake pocket Brophy camper tie downs part # TDSF that you mentioned only fit trucks up 2010 according to Brophy so you'd need to go a different route for your 2017 Ram 2500. You may be able to use Brophy Clamp On Camper Tie-Downs # HSAB though. They will fit if the external bed rail width is less than 5-1/2 inches and they require 2 inches of space beneath the lip of the bed rail. Use these with turnbuckle kit # TDHP.
view full answer...
- Compatibility of Brophy Camper Tie-Downs with 1998 GMC Dually Pickup TruckThe Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSSF are not recommended for dually trucks. They are a fit for most full-size, non-dually pickup trucks according to the manufacturer. I did reach out the manufacturer and they said you may be able to use the # HSSF or the # HSAB but they have not tested it on a 1998 GMC dually. The sidewall width is the biggest issue with the angle coming down to ensure clearance for connection. They also stated that...
view full answer... - Camper Hold Down Recommendation for a 2003 Ford F-350The Angled Hold-Downs for Truck Bed Campers # HSAB would work well on your 2003 Ford F-350 for securing your camper to the bed of the truck. The only Ford trucks that we have fit exclusions for with these are the 2004-2008 Ford F-150. You will also want the part # TDHP.
view full answer... - Could Brophy Camper Tie Downs be Used on 2016 Ram 3500The Brophy camper tie downs part # HSAB can be used on your 2016 Ram 1500 since they are a universal design. In general the frame mounted tie downs are a more solid choice over ones like these that attach just to the truck bed rails but the # HSAB would fit and work well. You'll also need hardware to secure the camper to the tie downs as well with the # TDHP.
view full answer... - Recommended Camper Tie-Downs For A 2018 Chevy Silverado 1500 For a 2018 Chevy Silverado 1500 with a 6.5' bed and running boards that end under the cab you would need the TorkLift Camper Tie-Downs - Front # TLC2217 and Rear # TLC3214. To complete your setup you'll also need some turnbuckles like the TorkLift AnchorGuard Derringer Turnbuckles # TLS9020.
view full answer... - Do Brophy Camper Tie Downs HSAB Fit 2007 Ford F-150 Short BedThe Brophy Camper Tie Downs part # HSAB that you referenced will fit and work well on your 2007 Ford F-150 6-1/2 foot bed. We had a customer with your exact truck leave a review for these and they said they worked great. The hardware kit you'll also need is the part # TDHP.
view full answer...
- Truck Bed Camper Tie-Downs for 2013 Chevrolet SilveradoI haven't heard of a specific issue like that with the 2013 Chevrolet Silverado. But there is truth that stake pocket tie-downs are not as secure as clamp on tie-downs. There's a lot pulling on the tie-downs and with the stake pocket design there's a lot of movement and chance of damage to the truck. We have a couple options by Brophy, # HSSF and # HSAB. Both are better than a stake pocket tie-down.
view full answer...
Do you have a question about this Camper Tie-Down?
Used Items Available
Condition: Surface Scratches
Notes: Item has minor cosmetic scratches and paint chips. Otherwise new and unused.
Condition: Installed
Notes: some light scratches and installation marks
Info for this part was:
Edited by:
Leah B
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Rachelle B
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R
Updated by:
Amanda M
Updated by:
Amanda K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
April
7/11/2014
Haha